Miele esw 50x0-29 - Manuals

This appliance complies with allrelevant local and national safetyrequirements. Inappropriate usecan, however, lead to personal injuryand damage to property. To avoid the risk of accidents anddamage to the appliance, pleaseread these instructions carefullybefore using it for the first time.They cont...

Technical safety ~ Before installation, check the appliance for visible signs of damage.Under no circumstances should youuse it if it has been damaged. Adamaged appliance is dangerous. ~ Before connecting the appliance to the mains supply, make sure that theconnection data on the data plate(voltage ...

~ During installation, maintenance and repair work, the appliance must bedisconnected from the mains electricitysupply. It is only completely isolatedfrom the electricity supply when: – the mains fuse is disconnected, – the screw-out fuse is removed (in countries where this is applicable), – it is s...

Disposal of the packingmaterial The transport and protective packinghas been selected from materials whichare environmentally friendly fordisposal, and can normally berecycled. Ensure that any plastic wrappings,bags, etc. are disposed of safely andkept out of the reach of babies andyoung children. D...

A display test is carried out for 10 seconds after theappliance has been installed and after a power cut. The fancomes on at the same time. The appliance cannot be usedduring this time. Please stick the extra data plate for the appliance suppliedwith this documentation in the space provided in the &...

Functions Use the X sensor to select the function you want. The applicable symbol lights up as follows: – / For warming cups and glasses. – H For warming plates and dishes – s For keeping food warm The last function selected is automatically activated the nexttime the drawer is switched on, and this...

Temperature settings Each function has its own temperature range. The factory-setrecommended temperatures are printed in bold. Thetemperature can be altered in 5° steps by touching the 6 sensor. The last temperature selected is automaticallyactivated the next time the drawer is switched on, and this...

Switching on ^ Open the drawer. ^ Switch the appliance on by touching the On/Off s sensor. ^ Touch the X sensor until the function required lights up in the display. ^ If you wish to alter the temperature, touch the 6 sensor until the LED for the temperature required lights up. The appliance is set ...

The quantity that can be loaded will depend to a greatextent on the size and weight of your own crockery.Do not overload the drawer. The maximum load bearingcapacity of the drawer is 25 kg. ESW 5070 - 14 / ESW 5080 - 14 / ESW 5088-14 The loading examples shown here are suggestions only. – 6 place se...

This function is for keeping food warm that has just beencooked, i.e. food that is still hot. It is not for reheating foodthat has gone cold. – In order to ensure that the temperature does not drop below the minimum required for keeping food warm(65°C), select the s function only. – Pre-heat the dra...

Settings Food Container Container cover? Temperature for s setting Position in drawer Floor Rack* To warm bread - No ] ^ ^ ^ ^ x x To warm rolls - No ] ^ ^ ^ ^ x x Steak (rare) Plate No ] ^ ^ ^ ^ x x New potatoes Plate/dish Yes ^ ^ ] ^ ^ x Mashed potato Dish Yes ^ ^ ] ^ ^ x Roast meat Plate Yes ^ ^ ...

– Distribute the crockery over the whole area of the drawer. Stacks of plates heat up more slowly than individual piecesof crockery. If large stacks of plates are unavoidable,place them at the front of the drawer. Use the rack(depending on model). – Do not place large serving dishes right up against...

Type offoodpreparation Container Container cover? Temperature for s setting Temperature for / setting Position in drawer Time in hours: minutes Floor Rack* Provingdough Bowl Yes, with plate ] ^ ^ ^ ^ x 0:30 Makingyoghurt Yoghurt jars with lid - ^ ] ^ ^ ^ x 5:00 Defrostingberries Bowl/dish No ] ^ ^ ^...

Low-temperature cooking Meat can be cooked at a constant low temperature over alonger period of time, with very tender results. It is possible to use the food warming drawer to cook meat ata low temperature. This is only suitable where the coretemperature does not exceed 65°C. The meat must beseared...

General notes Always allow the appliance to cool down before cleaning. Under no circumstances use a steam cleaning applianceto clean this appliance. The steam could attack theelectrical components and cause a short circuit. Only use domestic washing-up liquid to clean thisappliance; commercial clean...

, Installation work and repairs to electrical appliances must only be carried out by a suitably qualified andcompetent person in strict accordance with current localand national safety regulations (BS 7671 in the UK).Repairs and other work by unqualified persons could bedangerous. The manufacturer c...

Rack For increasing the loading area. Anti-slip mat The anti-slip mat keeps crockery securely in place. E-Cloth (microfibre cloth) Removes finger marks and light soiling. A range of Miele branded accessories and cleaning productsis available for your appliance from your local retailer, theMiele Spar...

~ Before connecting the appliance to the mains supply make sure that the connection data on the data plate (voltageand connected load) correspond with the mains electricitysupply, otherwise the appliance could be damaged. Consulta qualified electrician if in any doubt. ~ The socket and on-off switch...

ESW 50x0-14 / ESW 5088-14 Ovens a Ventilation cut-out required whencombined with a pyrolytic oven * Appliances with glass front ** Appliances with metal front Microwave-combi ovens Building-in dimensions 32

Check that the base of the drawer is clean and that it islevel (use a spirit level). This is important for appliance tofunction correctly. To avoid the risk of injury wear protective gloves wheninstalling the appliance in its housing unit. ^ Push the appliance into the housing unit as far the vapour...

After building in the combination appliance, it may benecessary under certain circumstances to – align the front of the food warming drawer. – align the gap between the food warming drawer and the combination appliance. ^ Remove screws a from the left and right side of the drawer front. ^ Carefully ...

All electrical work should be carried out by a suitablyqualified and competent person, in strict accordance withcurrent local and national safety regulations (BS 7671 inthe UK). Installation, repairs and other work by unqualified personscould be dangerous. The manufacturer cannot be heldliable for u...

In the event of any faults which you cannot remedy yourself, or if the appliance isunder guarantee, please contact: – your Miele Dealer or – the Miele Customer Contact Centre (see back cover for address). Please note that telephone calls may be monitored and recorded to improveour service. When cont...