Miele DGC 4086 XL - Manuals

Page 2 - Contents

IMPORTANT INSTALLATION SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . 3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Cut-out for venting the combi-steam oven . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page 3 - Note to the installer:; IMPORTANT INSTALLATION SAFETY INSTRUCTIONS

, WARNING - Read all instructions before installation or use of thesteam oven to prevent injury andmachine damage. ~ Installation, repair and maintenance work should be performed by a Mieleauthorized service technician. Work byunqualified persons could bedangerous. ~ Before installation make sure th...

Page 4 - Dimension details of the appliance front; Installation

Miele appliances can be installed flush or proud. Discuss your installationrequirements with your architect, designer or installer. Dimension details of the appliance front Installation 4 446 333 455,5 451,5 111,5 4 22*/23** 1* 1** -2 47,5 7/8" 4 3,8" 17 9/16" 1 7/8" 13 1/8" 3/16...

Page 6 - Installation in a tall cabinet; in the top of the cabinet; installing in combination with an oven; please refer to the installation

Cut-out for venting the combi-steam oven Installation in a tall cabinet To ensure that the combi-steam oven has adequate ventilation, the followingcut-outs measuring 19 11 / 16 " x 1 9 / 16 " (500 x 40 mm) must be provided: a in the top of the cabinet b in the center shelf above the installa...

Page 7 - Installation under a countertop; in the appliance support shelf

Installation under a countertop To ensure that the combi-steam oven has adequate ventilation, the followingcut-outs measuring 19 11 / 16 " x 1 9 / 16 " (500 x 40 mm) must be provided: a in the appliance support shelf b in the bottom of the cabinet space below it Installation 7 a b 1 5/8"...

Page 8 - b Installation niche; Appliance and installation dimensions

Installation in a tall cabinet a Combi-steam oven b Installation niche c Terminal block d Outlet or junction boxThis should be accessible after the appliance has been installed. e Power cord (5 ft.) * Appliances with glass front / ** Appliances with metal front Appliance and installation dimensions ...

Page 9 - Installation niche

Installation under a countertop If the appliance is be installed under a cooktop, observe the installationinstructions for the cooktop and its installation height. a Combi-steam oven b Installation niche c Terminal block d Outlet or junction boxThis should be accessible after the appliance has been ...

Page 10 - Installation in combination with an oven

Installation in combination with an oven a Combi-steam oven b Installation niche c Terminal block d Outlet or junction boxThis should be accessible after the appliance has been installed. e Power cord (5 ft.) f Oven * Appliances with glass front / ** Appliances with metal front See the "Cut-out ...

Page 11 - Installation in combination with ESW 408x-14

Installation in combination with ESW 408x-14 a Combi-steam oven b Installation niche c Terminal block d Outlet or junction boxThis should be accessible after the appliance has been installed. e Power cord (5 ft.) f Built-in plate warmer / built-in food warmer * Appliances with glass front / ** Appli...

Page 12 - Installation in combination with ESW 408x-14 BRWS

Installation in combination with ESW 408x-14 BRWS a Combi-steam oven b Installation niche c Terminal block d Outlet or junction box This should be accessible after the appliance has been installed. e Power cord (5 ft.) f Built-in plate warmer / built-in food warmer * Appliances with glass front / **...

Page 13 - Installing the appliance; Push the appliance into the cabinet niche and align it.

Installing the appliance ^ Push the appliance into the cabinet niche and align it. The device must be level, so that the steam generator canoperate properly.Deviation from a horizontal position should not exceed 2°. ^ Secure the appliance by screwing the two 3.5 x 25 mmwood screws (supplied) into th...

Page 14 - Before installation or; Power supply; Electrical connection

, CAUTION: Before installation or servicing, disconnect the powersupply by either removing the fuse,shutting off the main power ormanually "tripping" the circuitbreaker. Installation work and repairs shouldonly be performed by a qualifiedtechnician in accordance with allapplicable codes and ...