Miele DA3190 - Manuals

Installation , WARNING To reduce the risk of fire only use metal ductwork. Provided a larger distance is notgiven by the manufacturer of the cooktop, follow the recommendedminimum safety distances between acooktop and the bottom of the hood: - 22" (550 mm) above electric cooktops,- 30" (762 ...

The ventilation hood offers two modesof operation: Air extraction The air is drawn in and cleaned by thegrease filters and directed outside. The hood comes equipped with a non-return flap . The flap automatically closes when the hood is turned off sothat no exchange of outside air androom air can oc...

Turning the fan on ^ Pull the deflector out. The hood will operate at power level "2". The On/Off indicator and the second" -/+ " indicator will light. Selecting the power level Depending on how much the air needsto be filtered, there are four powerlevels available. ^ Use the " -...

Automatically switching back theIntensive power level The intensive level "4" can beprogrammed to automatically switchback to level "3" after 10 minutes. ^ Turn the fan and the lights off. ^ Press and hold the " -/+ " buttons for 10 secs. The first indicator of the fanpower l...

Before servicing or cleaning thehood, disconnect it from the powersupply by "tripping" the circuitbreaker or unplugging it. Make sure power is not restored tothe appliance while maintenance orrepair work is performed. Casing Never use abrasive cleaners,scouring pads, steel wool or caustic(ov...

Grease filter The reusable metal grease filterremoves solid particles from the ventedkitchen air (grease, dust, etc). The grease filter should be cleanedevery 3 - 4 weeks. A dirty filter is a fire hazard. ^ To remove hold and pull out thedeflector and the grease filtertogether. ^ Pull the grease fil...

^ To insert the grease filter, make surethat the red plastic guides are at the front and facing up. ^ Insert the grease filter in the deflectorand push upwards. It should glideonto the fixing pins. Inserting / replacing the activecharcoal filters For recirculation mode an activecharcoal filter must ...

Changing the light bulbs Before changing the light bulbs,disconnect the hood from the powersupply by either removing the fuse,unplugging it, or manually "tripping"the circuit breaker. When in use halogen bulbs becomeextremely hot, use caution. Do notattempt to change the bulbs untilthey have...

Repairs In the event of a fault which you cannoteasily fix yourself, please contact theMiele Technical Service Department atthe phone number on the back of thisbooklet. ^ When contacting the TechnicalService Department, please quotethe model and serial number of yourappliance. These are shown on the...

All electrical work should beperformed by a qualified electricianin strict accordance with nationaland local safety regulations.Installation, repairs and other workby unqualified persons could bedangerous. The manufacturer cannot be held responsible forunauthorized work.Ensure that power to the appl...

1. Installing the space bar T = K cabinet depth minus G hood depth ^ The hood depth G depends on the custom panel: – a Hood installed with a cabinet matching custom panel – b Hood installed without front panel These measures are only valid for theinstallation if the front panel sits flushwith the ca...

4. Secure the appliance ^ Push the hood back so it sits flushwith the front of the spacer strip. ^ Pull the deflector out. ^ Screw the hood, with 4 screws, ontothe runners. ^ Remove the installation protectionbetween the deflector and casing. ^ Loosen the screws of the fixingbrackets on the hood top...

5. Install the front panelif necessary The installation kit DML 300 isnecessary. It can be obtained as anoptional accessory from Miele. Theinstallation kit has an installation manualsupplied. ^ The deflector can be adjusted up to2" (50 mm) towards the front with thetwo adjusting screws left and ...

7. Venting Air extraction mode ^ Complete the venting installation, see"Air extraction". Recirculation mode If the hood cannot be installed for airextraction the appliance must beconnected for recirculation mode. For recirculation mode a respectiveinstallation kit is recommended whichcan be ...

– If the exhaust is ducted into an inactive flue, the air must be expelledparallel to the flow direction of theflue. Never connect an exhaust hood toan active chimney, dryer vent, flue,or room venting ductwork. Seekprofessional advice beforeconnecting an exhaust hood vent toan existing, inactive chi...

Disposal of packing material The cardboard box and packingmaterials protect the appliance duringshipping. They have been designed tobe biodegradable and recyclable.Please recycle. To prevent suffocation of children,ensure that any plastic wrappings,bags, etc. are disposed of safelyand kept out of th...