Miele CVA5065 - Manuals

Interior view a Master switch b Ground coffee chute cover c Ground coffee chute d Slide control to select fineness of ground coffee e Coffee bean container f Drip tray with grid for easier carrying g Water container with inlet device h Brew unit i Waste container j Central spout connector (connectin...

Stainless steel milk flask For storing and keeping milk cold, with lid (with handle) andadditional cap( not suitable for cleaning in a dishwasher) Containers Large and small containers for cleaning and rinsing the milkpipework Coffee spoon For adding the correct amount of ground coffee Cleaning agen...

Miele accessories and cleaning and conditioning productsare available for your coffee machine.These can be ordered via the internet atwww.miele-shop.com, from the Miele Spare Parts Departmentor from your Miele Dealer. Stainless steel milk flask with cap For storing and keeping milk cold( not suitabl...

This coffee machine conforms withall relevant legal safetyrequirements. Improper use can,however, lead to personal injury anddamage to property. To avoid the risk of accidents anddamage to the machine, pleaseread these instructions carefullybefore using it for the first time.They contain important i...

~ The machine must be disconnected from the electricity supply duringinstallation or repair work. ~ Do not open the outer casing of the machine. Tampering with electricalconnections or components andmechanical parts is highly dangerousto the user and can cause operationalfaults. ~ Only use genuine o...

The following notes should help you getto know your coffee machine beforestarting to use it. Controls This machine has sensor controls whichreact to touch. To operate the machine,you only need to touch the relevantsensor. There are five sensors: s On/Off sensor: For switching themachine on or off &l...

The coffee machine must becleaned thoroughly (see "Cleaningand care") before you fill it with waterand coffee beans. It is vital that you programme inthe water hardness level of yourwater (see "Settings: Customising your machine - Setting the waterhardness"). Filling the water contai...

Switching on When you switch the coffee machine onit will start heating up and the pipeworkwill be rinsed through. This cleans andpre-heats the pipework in preparationfor making coffee. ^ Touch the On/Off sensor s . The following message will thenappear: Heating phase If the automatic Rinsing progra...

Adjusting the height of thecentral spout The height of the central spout can beadjusted to suit the height of the cup sothat the drink will not cool down asquickly as it would if the spout werefurther away from the cup. The cremawill also be a better quality if the coffeedoes not have so far to go! ...

If you not added any groundcoffee, you must select "No". Otherwise the machine will assume that there is ground coffee inthe chute, and only water will bedispensed the next time coffee ismade! To make a drink ^ Place a cup under the central spout. ^ Touch the OK sensor. The machine will prep...

To make drinks with milk, ^ place the lid on the stainless steelmilk flask by twisting it anticlockwiseuntil it locks into place. ^ Open the machine door and hang themilk flask in the machine asillustrated, ensuring that the milkpipework is correctly engaged. ^ Close the machine door. Cappuccino, la...

User profile drinks The User profile function is used toselect the quantity of water and milk foryour drink, as well as the fineness of theground, temperature and pre-brewingto suit your taste and that of yourguests (see "Setting up user profiles"). If you have set the machine up for aspecif...

A good espresso or coffee with a thick,even crema depends not only on thequality, pressure and temperature ofthe water and the quality of the coffeebeans, but also on the quantity ofbeans and how finely they are ground. The crema should have an evennut-brown colour with dark stripesrunning through i...

It is easy to customise your machine tosuit your exact requirements. Settings menu To select the various programmeoptions: Settings F q r H I J L n m C ^ Touch the right arrow sensor until"Settings F " appears in the display, and then touch the OK sensor. ^ Touch one of the arrow sensors unt...

Water hardness: soft 1, medium 2, hard 3, very hard 4 Display: Contrast, Brightness Volume: Buzzer tones, Keypad tone Plate warmer: Automatic, On, Off Plumbed in water supply: On, Off Showroom prog.: Demo programme, Off Factory default: All settings can be reset to the factory default, and userprofi...

Setting the time of day ^ Select "Settings F " from the Main menu, and then touch the OK sensor. Settings Time of day Timer ^ Touch the right arrow sensor until"Time of day" is highlighted and touchthe OK sensor. There are three options: Display The Time of day display can beswitched...

Setting the timer ^ Select "Settings F " from the Main menu, and then touch the OK sensor. Settings Timer Coffee jug ^ Touch the right arrow sensor until"Timer" is highlighted and touch theOK sensor. ^ Select "Set" with the arrow sensorsand touch the OK sensor. There are thre...

Coffee jug (making severalcups one after the other) This function can be used to make upto 8 cups of coffee automatically oneafter the other (max. 1 l). ^ Select "Settings F " from the Main menu, and then touch the OK sensor. Settings Coffee jug Prog. the amount ^ Touch the right arrow senso...

^ Use the arrow sensor to select thedrink that you wish to set the amountof coffee for and then touch the OKsensor. ^ Use the arrow sensor to set theamount to "more" or "less". ^ Touch the OK sensor to save thesetting. Setting Pre-brewing When the Pre-brewing function isswitched on, ...

^ Use the arrow sensors to highlightthe temperature option. ^ Touch the OK sensor to save thesetting. Setting Automatic rinsing The pipework is rinsed throughautomatically when the coffee machineis switched off if the automatic rinsingfunction is switched on and the coffeemachine has been used for p...

Lighting: Setting thebrightness You can set how bright the lightingshould be on the machine: ^ Select "Settings F " from the Main menu, and then touch the OK sensor. Settings Lighting Info ^ Touch the right arrow sensor until"Lighting" is highlighted, and thentouch the OK sensor. ^ S...

Info (showing the number ofdrinks) The "Info" option enables you to checkhow many drinks the machine hasalready dispensed or how many youcan still dispense before it has to bedescaled. ^ Select "Settings F " from the Main menu, and then touch the OK sensor. Settings Info Safety ^ Tou...

To override the System lock ^ Touch the OK sensor for about 3seconds. The machine is now temporarilyunlocked and can be used to makedrinks again. It locks itself as soon as the machine is switched off. Setting the water hardness For trouble-free operation of the coffeemachine, and to ensure that the...

If the water is harder than 40°dH/7.0mmol/l, limescale will build up morerapidy than with soft water.Descaling will need to be carried outmore regularly than stated toprevent limescale damage to themachine. ^ Select "Settings F " from the Main menu, and then touch the OK sensor. Settings Wat...

Setting the volume (keypadtone, buzzer) You can choose for a tone to soundeach time a sensor is touched. Thevolume of the tone can also beadjusted: ^ Select "Settings F " from the Main menu, and then touch the OK sensor. Settings Volume Plate warmer ^ Touch the right arrow sensor until"V...

On You can switch the plate warmer onand off manually whenever you want,independently of the coffee machine. Off The plate warmer will not switch onbecause the coffee machine is notsupplying it with any electricity. Thecoffee machine is delivered with "Off"as the default setting. To switch t...

Resetting the factory defaultsettings The "factory default" setting is used toreset the various settings back to thedefault status. From here you can select whether toreset all settings back to the default or to delete any user profiles . ^ Select "Settings F " from the Main menu, an...

User profiles You can delete all user profiles exceptfor the standard one under "UserProfiles". ^ Select "Reset" under "User profiles",and touch the OK sensor. User profiles are then deleted. If you select "Reset" bymistake, switch the coffeemachine off: Resetting to ...

The flavour of the coffee produceddepends on the type of coffee, howfinely the beans are ground and thequantity of water used. Not all espressoand coffee cups are the same size. Toensure the machine uses the rightamount of water to suit your taste andyour cups, you can programme theamount to use. Wi...

To cater for different tastes andpreferences, you can enter up to 9individual User profiles. For each Userprofile, you can select the followingindividual settings: – The amount of water for coffee-based drinks and hot water – The amount of milk for drinks with milk – The amount of coffee – The water...

Creating a User profile ^ Use the arrow sensors to highlight"Create", and then touch the OKsensor. You can allocate up to 9 User profiles. If you try to allocate morethan 9 User profiles, " Memory full " will appear in the display and youwill need to delete one name tocreate space. L...

Deleting a User profile If you want to delete the User profilecompletely, ^ Select "Delete User profile" using theOK sensor. ^ Use the arrow sensors to select theUser profile you want to delete. ^ Touch the OK sensor. A tick will appear after the user profileand after a short while it will b...

Quick guide Clean the coffee machine every day to prevent a build-up of bacteria. Recommended frequency What do I have to do? Each time milk is used to make adrink, if more than one hour haspassed since the last drink wasmade Rinse milk pipework Every day(usually at the end of the day,before the mac...

Rinse the system Before switching the machine off forany length of time, the pipework, brewsystem and central spout need to becleaned.If you have switched the automaticrinsing function off, you will need torinse the system through manually.Place the smaller of the two containersunder the central spo...

To rinse the milk pipework: Fill thelarger of the two plastic containersto the "max" mark with cold water. Make sure that the lid of the stainless steel milk flask engagesproperly. Clean milk pipework To prevent milk going off in themachine and the pipework gettingclogged up it should be cle...

Stainless steel milk flask withlid The stainless steel milk flask with lidmust be washed by hand using hot water. It is important to keep the top of theflask and the seals clean (whilst filling itand carrying it). Any soiling can lead toa malfunction of the flask in themachine. ^ Clean the stainless...

The central spout ^ Pull the central spout down as far asit will go ( a ), and pull the cover to the spout forwards to remove it ( b ). ^ Turn the cover around, push theinsert up and out and then clean bothparts thoroughly. ^ Slide the insert back into the coveruntil it clicks into place. ^ Pull out...

Water container Empty the water container daily and - ifyou are not using the plumbed in watersupply - fill with fresh, cold tap waterjust before use. When cleaning, make sure that thereis no soiling in the area around thevalve. Otherwise the container willnot sit correctly and this could resultin w...

Drip tray There is a sensor in the drip tray whichcauses a message to appear in thedisplay when the drip tray is full andneeds to be emptied. Remove the trayand empty and clean it when thismessage appears.However, to avoid a build-up of odours,the drip tray should be cleaned every day . After runnin...

Coffee bean container The coffee bean container must becleaned by hand with hot water and a little washing-up liquid. ^ Take the coffee bean container out ofthe machine and then push the lidback to remove it. ^ Clean the coffee bean container andthe lid, and then dry them boththoroughly. ^ Replace t...

Brew unit The brew unit must be cleaned once a week by hand and without usingcleaning agent, because the moving parts are lubricated and therubber seals could become brittle ina dishwasher. ^ Remove the water container, wastecontainer and the coffee chute cover. ^ Press the light coloured button und...

^ Press the light-coloured button underthe handle of the brew unit a and whilst doing so turn the handle in thedirection of the arrow b . Degreasing the brew unit Depending on the natural oilcontent of the coffee used,the brew unit could become blocked. It should therefore be cleanedafter approx. 20...

When prompted to Drop a cleaning tablet in the ground coffee chute , ^ remove the coffee chute cover andopen the lid of the coffee chute. ^ Place a cleaning tablet into the coffeechute. ^ Close the lid, replace the coffeechute cover and close the machinefront. ^ Follow the instructions in the displa...

The machine should be descaledregularly to ensure that it functionscorrectly. It will remind you when thisneeds to be carried out. When only 50 portions can be madebefore the next descaling programmehas to be run, the following messagewill appear in the display: No. of portions until descaling: 50 ....

When Programme finished appears in the display, ^ touch the OK sensor. The descaling programme is finishedand the machine can be used formaking drinks again. Plumbed in machines willautomatically revert to using theplumbed in water supply if set up todo so before the descalingprogramme was run. Desc...

Repairs to electrical appliancesshould only be carried out by asuitably qualified and competentperson in strict accordance withcurrent local and national safetyregulations. Repairs and other workby unqualified persons could bedangerous. Messages will appear in the display towarn of certain problems....

. . . a message appears in the displayreminding you to fill or replace themilk flask even though it is full andpositioned correctly. ^ Clean the flask thoroughly, payingparticular attention to the area aroundthe lid and the neck (see "Cleaningand care - Stainless steel milk flaskwith lid").A...

. . . water or milk stops flowing whilstprogramming in the amount todispense. The flow stops automatically when themaximum fill quantity is reached. Themaximum quantity is stored in memory. If there was not enough water or milk inthe water container or milk flask, theamount that has been dispensed w...

In the event of a fault which you cannotcorrect yourself, or if the appliance isunder guarantee, please contact: – your Miele Dealer or – Miele (see back cover for contact details). Please note that telephone calls maybe monitored and recorded fortraining purposes (UK only). When contacting your Dea...

AItering the following settings from thefactory default, will increase the energyconsumption of the coffee machine: – Eco mode – Lighting – Time of day display – Timer – Connection of a plate warmer When altering these settings, themessage "This setting increases energyconsumption" appears i...

Notes on connecting to themains water supply Connection to the mains watersupply should only be carried out bya qualified and competent person instrict accordance with national andlocal safety regulations. This machine conforms to IEC 61770and EN 61770. The water quality must conform tothe requireme...

Connection to the water inlet Before making plumbingconnections, ensure the appliance isdisconnected from the mainselectricity supply. ^ Switch off at the main switch. Connection to the water supply shouldbe carried out by a qualified plumberand should incorporate a stopcock witha 3/4" thread. T...

All electrical work should be carried outby a suitably qualified and competentperson only, in strict accordance withcurrent national and local safetyregulations (BS 7671 in the UK). Installation, repairs and other work byunqualified persons could bedangerous. The manufacturer cannotbe held liable fo...

Building-in and combination options The appliance is designed to be built into a tall unit. It can also be combined with other Miele built-in appliances. If the coffee machineis to be built in above another appliance, there must be a full-width, closed shelfbetween them (except when it is combined w...

If it is not: ^ realign the machine by adjusting thefour feet. The feet can be unscrewed by up toapprox. 10 mm. ^ Plumb the appliance into the mainswater supply. ^ Connect the appliance to theelectricity supply. ^ Push it all the way into the niche untilyou feel resistance. ^ Open the machine door, ...