Miele 04 610 490 - Manuals

The Miele "Waterproof system" pro-tects from water damage provided the following conditions have been met: – the machine is correctly plumbed in and connected to the electricity sup-ply. – if a fault has been identified, the ma- chine must be examined by a com-petent person before further us...

Help to protect our environment Disposal of the packing material The transport and protective packing ismostly manufactured from the followingrecycled or re-useable materials: – corrugated paper/card – polystyrene - CFC-free – untreated surplus wood – chipboard, contains no phenolic resins – polyeth...

Washing environmentally and economically Caring for the environment means sav-ing water, energy and detergent whenwashing but without compromising onresults. The key to a good wash result is findingthe best combination of amount ofdetergent, temperature, length of pro-gramme and the machine’s techno...

How to wash correctly The headings numbered ( 1 , 2 , 3 ,...) show the operating sequense and canbe used as a brief guide. Before washing 1 Prepare the wash load Empty all pockets. Foreign objects (e.g. nails, coins,paper clips etc) can cause damageto textiles and components in themachine. Sort the ...

3 Load the drum. Unfold washing and load loosely in thedrum. To achieve best results it is advis-able to make up mixed loads consist-ing of both large and small items. This improves the washing effect andhelps distribute the load evenly to keepthe machine stable and reduce thenoise level during spin...

After washing 1 Press the “Door” button. 2 Remove the washing. Only remove washing from the ma-chine once the drum has stoppedturning, otherwise you may seri-ously injure yourself. 3 Check the folds in the door sealfor any small articles e.g. buttonswhich might be lodged there. Make sure the drum is...

To change a programme Changing a programme oncestarted: Changing a basic programme oncestarted: This is only possible by starting againcompletely. Switch the machine off and then onagain and select a new programme. Changing additional options, tem-perature and spin speed: This can be done if the cha...

Adding or removing washing after programme start Washing can be added or removedafter the programme has alreadystarted, when using the following pro-grammes: – COTTONS – MINIMUM IRON – QUICK WASH 40°C Press the "Door" button in and hold ituntil the door springs open. – In the SEQUENCE displa...

Adding detergent All modern detergents produced forautomatic washing machines are suit-able, including liquid, compact (con-centrated) and special applicationdetergents. Use dispensing aids, e.g.balls, if these are supplied with thedetergent. Woollens and knitwear con-taining wool mixtures should be...

Fabric conditioners/starch formulations Fabric conditioners/Texturisers Fabric conditioners make garmentssoft and fluffy to handle and help pre-vent static cling when tumble drying.Dispense according to the manufac-turer’s instructions. Texturisers are synthetic starch formula-tions and give body to...

Programme selection Programme Fabric Temperature range COTTONS 9876 Cottons and linen fabrics, eg bedlinen, table linen,towelling, jeans, T-shirts, nappies 95°C to cold MINIMUM IRON 4321 (60°C) white nylon, white polyester fabrics, (50°C)coloured nylon, polyester, cotton and viscose fabricswith spec...

Programme sequence COTTONS MINIMUM IRON DELICATES Soak optional optional optional Pre-wash optional optional optional Main wash ß ß ß Top-up rinse from 70°C – – Graduated rinsing – from 50°C from 50°C No. of rinses – normal 3 or 4 1) 3 3 –Part load 2 3 3 –Short wash 2 2 3 Rinse and interim spin (rpm...

Care symbols Washing 9 Cottons 95°C 8 Cottons 60°C 7 Cottons 40°C 4 Minimum iron 60°C 2 Minimum iron 40°C 1 Minimum iron 30°C a Delicates 40°C @ Delicates 30°C Machine washable woollens Use the special ’Wool’ programme,and only wash textiles bearing thelabel shown here: This symbol is registered by ...

Additional options The following options are additionallyavailable for certain wash progammes: “Soak” – For heavily soiled and stained items with dried on stains, or ones whichcannot be bleached out, (e.g. blood,fats and oils, cocoa). – Soak duration: 2 hours. Adding detergent for "Soak" The...

Delay start/time left display Display field "TIME" (hoursmins) The display field to the right of the pro-gramme sequence display has a dualfunction: 1. Time left display 2. d Delay start The indicator lights to the left of theTIME display field show which functionis active. Time left display...

Cleaning and care Cleaning the washing machine Clean the casing with a mild non-ab-rasive detergent or soap and water.Wipe dry with a soft cloth. Clean the facia panel with a dampcloth and dry with a soft cloth. The drum can be cleaned using asuitable proprietary stainless steelcleaner. Do not use a...

Problem solving guide Repair work to electrical appliances should only be carried out by a suitablyqualified person in accordance with local and national regulations. Unauth-orised repairs could be dangerous. What to do if, . . . Cause . . . Remedy . . . . . . No lights come on in thePROGRAMME colum...

What to do if Cause . . . Remedy . . . . . . the drum door cannot beopened. The appliance is not plugged into the electricity supply. – Put the plug in the socket. Power cut – See “What to do if” - (1stSection) on how to open thedoor. The door was not correctlyengaged. – Please press hard againstthe...

Pull the emergency door latch down-wards using a spoon handle (see il-lustration). The machine door willthen open. Please note that: on machines with lefthand hingeing the emergency doorlatch is located behind a second ac-cess flap in the centre of the plinth. Always make sure the drum is sta-tionar...

After sales service In the event of any faults which you cannot remedy yourself, please contact: – Your Miele Dealer or – Your nearest Miele Service depart- ment. (see back cover for the address). When contacting the Service Depart-ment, please quote the Model and Ser-ial nos. of your appliance, bot...

Installation Installation surface A concrete floor is the most suitable in-stallation surface for a washing ma-chine, being far less prone to vibrationduring the spin cycle than woodenfloorboards or a surface with "soft"properties. Please note the following points: The machine must be level ...

Levelling the machine The machine must be perfectly level to ensure safe and proper operation. Incorrect installation may increasewater and electricity consumption. The screw feet can be adjusted to levelthe machine. Unscrew the foot or feet until the ma-chine stands level.Hold the foot tight using ...

Decor panel dimensions (The figures given in brackets indicatethe tolerance level in mm.) Width: 587 (-1) mm Height: 602 (-1.5) mm Thickness: 1 (+0.5) mm Panels more than 1.5 mm thick requirean “adapter strip for a 4 mm thickdecor panel”. This is available fromyour Miele Dealer or the Spare PartsDep...

Residual test water Flush out any residual test water still inthe machine as follows: Do not load the machine. Add a little detergent to compart-ment j . Switch on the machine. Select the “COTTONS 60°C” pro-gramme. Select the "Short” option. This operation will flush out anyresidues. Water hardn...

Plumbing Connection to water supply Fitting The machine should be connected to amains water supply in accordance withstandard regulations. In Germany thewashing machine is not required tohave a non-return valve as it has beendesigned to comply with DVGW regula-tions. The machine is designed to opera...

The Miele “Waterproof system” con- nected between the stopcock and themachine offers the safest protectionagainst water leaks. For the “Waterproof system” to functioncorrectly, it may only be fitted in the po-sitions shown (see illustrations). Connection to the mains water supplyshould incorporate a...

Important! The plastic casing of the water connec-tion contains an electric component. Do not dip into any liquid! The "Waterproof system" must onlybe connected to its own stopcock. Itmust not be connected to mixer tapsor similar. Plumbing 44

Electrical connection This machine is supplied ready for con-nection to an a.c. single phase 230 -240 V, 50 Hz supply. The machine issupplied with a 2 m long mains cablewith moulded plug. The voltage, ratedload and fuse rating are given on thedata plate. Please ensure that thesematch the household m...

Programmable functions The following programmable functionscan be activated by the user. A function stays programmed in mem-ory until it is cancelled. High water level (P1) Where rinse results are particularly im-portant. Effective for the rinses in programmes: – COTTONS – MINIMUM IRON – QUICK WASH ...

The machine must first be switchedoff and the door closed. To select, activate or deactivate a pro-gramme function: 1 Press the Cottons and Soak pads atthe same time and hold them in. 2 at the same time press the I-On/0-Off button. – The machine is switched on. 3 “ P ”.appears on the left of the tim...

Consumption data Normal Programmes(without any additional options orprogrammable functions) Load Consumption data COTTONS 95°C 5 kg Electricity: 1.70 KWhWater: 59 lTime: 1 h 52 mins COTTONS 60°C * 5 kg Electricity: 0.96 KWhWater: 56 lTime: 1 h 50 mins COTTONS 40°C 5 kg Electricity: 0.50 KWhWater: 56...

Technical Data Height . . . . . . . . . . . . . . . . . . . . . . . . . . Width . . . . . . . . . . . . . . . . . . . . . . . . . . Depth . . . . . . . . . . . . . . . . . . . . . . . . . . Depth with door open . . . . . . . . . . . . . Weight . . . . . . . . . . . . . . . . . . . . . . . . . Max. f...