Metrologic MLPN 2407 - Manuals
Metrologic MLPN 2407 – Manual in PDF format online.
Manuals:
Manual Metrologic MLPN 2407
Summary
MetroSelect ™ Introduction iii Section A: Code Types & Decode Rules A Section B: Supplements B Section C: Communications C Section D: Scanner Operation D Section E: Prefixes/Suffixes E Section F: Code Formatting F Section G: RS-232 G Section H: Keyboard H Section I: OCIA I Section J: Light Pen P...
MetroSelect ™ Your new scanner has been configured at the factory with default settings. Many host systems have unique formats and protocol requirements. Therefore, Metrologicprovides a wide range of configurable features that may be selected using this bar code basedconfiguration tool. Once the con...
MetroSelect ™ Multi-Code Method 1. Power up scanner2. Scan Enter/Exit Configuration Mode bar code (3 beeps) 3. Scan bar code for the desired feature (1 beep) 4. Scan Enter/Exit Configuration Mode bar code (3 beeps) and save new configuration. Single Code Method 1. Power up scanner2. Scan the bar cod...
MetroSelect ™ Use the Recall Default bar code. This will erase all previous settings and return to the scanner’s defaultcommunications protocol. -Keyboard Wedge interface scanners will load keyboard wedge defaults. -All other scanners load RS-232 defaults. Note: Metrologic manufactures custom OEM sc...
MetroSelect ™ *Enable Code 128 Disable Code 128 Enable UCC/EAN - 128 ‘]C1’ Code formatting *Disable UCC/EAN -128 ‘]C1’ Code formatting Code 128 For Coupon Code 128, see Section B. 100113 100103 100314 100304 A-3
MetroSelect ™ Enable PARAF (Italian Pharmaceutical Codes) Support *Disable PARAF Support When enabled, the scanner will convert Code 39 bar codes to PARAF format. When disabled, the scanner will notconvert Code 39 bar codes to PARAFformat. Enable TRI-OPTIC Code *Disable TRI-OPTIC Code 100215 100205 ...
MetroSelect ™ *Enable Interleaved 2 of 5 (ITF) Disable Interleaved 2 of 5 (ITF) Interleaved 2 of 5 Enable MOD 10 Check on ITF *Disable MOD 10 Check on ITF When option disabled, the scanner willnot test Interleaved 2 of 5 (ITF) barcodes for a Modulo 10 check digit. When option enabled, the scanner wi...
MetroSelect ™ ~ITF Symbol Length Lock 1 ~ITF Symbol Length Lock 2 To specify a second ITF symbol lengthlock, scan the above bar code and thea p p ropriate code bytes located in Section M . Refer to Multi Code Method on page iii. To specify a First ITF symbol lengthlock, scan the above bar code and t...
MetroSelect ™ Enable Standard 2 of 5 *Disable Standard 2 of 5 ~Standard 2 of 5 Symbol Length Standard 2 of 5 100110 100100 901500 A-8 To specify a minimum number of ITFcharacters to be decoded, scan the abovebar code and the appropriate code byteslocated in Section M. Refer to Multi CodeMethod on pa...
MetroSelect ™ Codabar *Enable Codabar Disable Codabar Enable Dual Field Codabar *Disable Dual Field Codabar Enable Hong Kong 2 of 5 *Disable Hong Kong 2 of 5 100316 100306 100114 100104 100012 100002 A-10
MetroSelect ™ *Enable Code 93 Disable Code 93 Enable Code 11 *Disable Code 11 Code 93 Code 11 100112 100102 100013 100003 A-11
MetroSelect ™ Enable Telepen *Disable Telepen Enable ALPHA Telepen *Disable ALPHA Telepen Telepen 100017 100007 100016 100006 A-12
MetroSelect ™ Enable MSI Plessey MOD 10/10 Check Digit Test MSI Plessey bar codes for a doubleModulo 10 check digit. *No MSI Plessey Check Digit This option will not test MSI Plessey barcodes for a check digit. *Enable MSI Plessey Mod 10 Check digit Test MSI Plessey bar codes for a singleModulo 10 c...
MetroSelect ™ *UK Plessey A to X Conversion Disabled UK Plessey A to X Conversion Enabled Enable UK Plessey *Disable UK Plessey 100117 100107 100716 100706 A-14 Enables UK Plessey A to XConversion. Disables UK Plessey A to XConversion.
MetroSelect ™ There are seven bar code lock lengths available. Specific code types can be assigned to a lock length.While in programming mode, start with lock length 1, then scan three Code Byte bar codes from Section M that represent the bar code length. (A table with the code type values can be fo...
MetroSelect ™ *Disable 977 (2 digit) Supplemental Requirement When enabled, the scanner will notrequire a 2 digit supplement bescanned whenever an EAN-13 codebegins with 977. Enable 977 (2 digit) Supplemental Requirement When enabled, the scanner willre q u i re a 2 digit supplement bescanned whenev...
MetroSelect ™ 400 msec to Find Supplemental With this option, the scanner will allot400 milliseconds to “find” an add onafter a main UPC/EAN bar code has been scanned. 200 msec to Find Supplemental With this option, the scanner will allot200 milliseconds to “find” an add onafter a main UPC/EAN bar c...
MetroSelect ™ Enable ISBN Check Digit Transmission Not available with all models. Disable ISBN Check Digit Transmission *Disable Bookland to ISBN Conversion Enable ISBN Re-Formatting Not available with all models. *Disable ISBN Re-Formatting Enable Bookland to ISBN Conversion Not available with all ...
MetroSelect ™ Enable OCIA Output Select this option if the communicationsre q u i rement is an Optically Co u p l e dIn t e rface Adapter (OCIA). This a clocked(by the host) serial interf a c e . Load OCIA Defaults Scan this before selecting EnableOCIA output 415544 999993 C-2 Select this option for...
MetroSelect ™ Reserved Reserved 917500 415564 C-3 Enable No Communication Mode Select this option if the scanner doesnot interface with the host device. 415534
MetroSelect ™ *1 Scan Buffer When enabled, the scanner will scanone bar code in the scan field and notscan again until the bar code isremoved from the scan field for theduration of the same symbol timeout. 2 Scan Buffers Same function as 2 Scan Buffers, but4 bar codes are in the scan field. 5 Scan B...
MetroSelect ™ 7 Scan Buffers Same function as 2 Scan Buffers, but7 bar codes are in the scan field. 8 Scan Buffers Same function as 2 Scan Buffers, but8 bar codes are in the scan field. 318060 318070 D-3
MetroSelect ™ 1 Redundant Scans 2 Redundant Scans 3 Redundant Scans *0 Redundant Scans Redundant Scans 5 Redundant Scans Requires 1 good decode for a “goodscan.” Requires 2 consecutive decodes of thesame bar code data for a “goodscan” . Requires 3 consecutive... 4 Redundant Scans Requires 4... Requi...
MetroSelect ™ 7 Redundant Scans 6 Redundant Scans Requires 7... Requires 8... 301160 301170 D-5
MetroSelect ™ *Normal Same Symbol Check Optional Same Symbol Check Disable MAJIC *Enable MAJIC Miscellaneous Decode Features The Metrologic Algorithm for JoiningIncomplete Codes (MAJIC) aids indeciphering damaged or incompletebar codes. Enable for more aggres-sive decoding. Disable this feature when...
MetroSelect ™ Fixed for High Density Codes Fixed for Medium Density *Optimize for Low Density Codes Do not change these settings unless instructed by a Metrologic representative. Fixed for Low Density Codes Optimize for High Density Codes Depth of Field Adjustments 418790 4187130 418700 418710 41872...
MetroSelect ™ Same Symbol Time Out 100 msecs *Same Symbol Time Out 500 msecs Same Symbol Time Out 1200 msecs Same Symbol Time Out 2000 msecs Same Symbol Time Out 200 msecs No Same Symbol Time Out These numbers determine the length of time before a bar code can be rescanned after it is removed from t...
MetroSelect ™ ~Variable Same Symbol Time- out In configuration mode, scan this barcode and a code byte sequence from Section M to set the same symbol time out duration. Values rangef rom 001 to 127 (50 to 6350msecs). Refer to MultiCode Methodon page iii. Infinite Same Symbol Time Out When selected, ...
MetroSelect ™ Optional Tone 1 Optional Tone 2 Optional Tone 3 *Normal Tone Optional Tone 4 Optional Tone 5 Beeper Options 318575 318565 318555 318545 318535 318525 D-11
MetroSelect ™ Enable Fast Beep *Disable Fast Beep Beep Twice on Supplements No Beep Optional Tone 6 *Beep Once on Supplements 318515 318505 118406 118416 118414 118404 D-12
MetroSelect ™ Beep on BEL Command The scanner beeps when it receives a BEL character from the host. If anumber is sent within 200 msecsbefore the BEL character, the scanner will beep that number oftimes. *Ignore BEL Command *Disable Light Pen Toggle During Beep Enable Light Pen Toggle During Beep Wh...
MetroSelect ™ *1 msec Intercharacter Delay 10 msec Intercharacter Delay Use these codes to select the amount of delay between sending data characters and “Bar code” Records from the scan-ner to the host. This helps prevent the scanner from overflowing host input buffers. Data Transmission Delays ~Va...
MetroSelect ™ Turn Off Laser During Inter- Record Delay *Leave Laser On During Inter-Record Delay ~Variable Inter-Record Delay Inter-Record Delay No Intercharacter Delay 818800 919300 119317 119307 D-15
MetroSelect ™ *Disable “D/E” Disable Do not monitor D/E commands. Enable “D/E” Disable Command When this option is chosen, the scanner will disable scanning after itreceives an ASCII “Z” from the hostdevice. It will enable scanning when itreceives an ASCII “R.” Enable Z/R Type D/E Simulation *No “Z/...
MetroSelect ™ Enable “F/L” Laser Command *Disable “F/L” Laser Command Do not monitor “F/L” commands. When enabled, the scanner will turno ff the laser after the scanner receives an ASCII “F” character. Thelaser will turn on after it receives anASCII “L” character. Motor On/Off Using M/O Commands *Di...
MetroSelect ™ Use DTRScan Disable When enabled, the scanner will monitor the DTR input to determine ifscanning should be allowed. A +12V“active” level enables decoding. A -12V “inactive” level disablesdecoding. *Do not use DTRScan Disable Do not monitor the DTR input. 118115 118105 D-20
MetroSelect ™ Power Save in 20 Minutes Enters power save mode if the scannerremains idle for 20 minutes. For use with Omnidirectional scanners only. Power Save in 30 Minutes D-23 8186200 8186300 Enters power save mode if the scannerremains idle for 30 minutes. For use with Omnidirectional scanners P...
MetroSelect ™ Enable Japan Mode *Disable Japan Mode Miscellaneous Features D-24 118112 118102
MetroSelect ™ Scanability ON This option enters scanability test mode. D o not enable unless instructed by a M e t rologic re p resentative. *Scanability OFF *Scan Count Mode OFF 118017 118007 Scan Count Mode ON When enabled, the scanner will enter scancount test mode and the scanner’sf i rm w a re ...
MetroSelect ™ ~Configurable Prefix Character #1 When this option is chosen, a prefixID can be added and assigned fordata transmission. Use this code witha 3 code byte sequence fro m Section M that re p resents the desired character. ~Configurable Prefix Character #2 Assigns a second configurable pre...
MetroSelect ™ ~Configurable Prefix Character #7 Assigns a seventh configurable prefix character. ~Configurable Prefix Character #8 Assigns an eighth configurable prefix character. ~Configurable Prefix Character #10 Assigns a tenth configurable prefix c h a r a c t e r. *Clear All User Configurable P...
MetroSelect ™ Use Configurable Code ID Bytes as Suffixes User configured, code specific ID bytesa re transmitted after the data. I f using suffixes, user configure dp refixes can not be used. Configurable UPC-A ID Configurable UPC-E ID While using the MultiCode Method, scanthis bar code followed by ...
MetroSelect ™ Configurable EAN-8 ID Configurable EAN-13 ID Configurable Code 128 ID Configurable Code 39 ID 905800 905900 906000 906100 E-4 While in using the MultiCode Method, scanthis bar code followed by the 3 code bytebar codes in Section M that re p resent a unique ID character to be associated...
MetroSelect ™ E-8 Enable Rochford-Thomson Mode *Disable Rochford-Thomson Mode Enable STX Prefix *Disable STX Prefix Standard Prefix Characters When enabled, the scanner will trans -mit a S t a rt of T e X t (ASCII 02H) before each bar code. Will not transmit a S tart of T e X t (ASCII 02H) before ea...
MetroSelect ™ E-9 Enable UPC Prefix ID *Disable UPCPrefix ID When enabled, the scanner will transmit a prefix before any UPC/EANbar code. The prefixes are A (UPC-A),E0 (UPC-E), F (EAN-13), and FF (EAN-8). Do not send prefix ID Characters withUPC/EAN codes. Enable NCR Prefix ID When enabled, the scan...
MetroSelect ™ Enable Nixdorf ID Characters When enabled, this option transmitscode identifiers before each bar codefor many Siemens/Nixdorf re g i s t e r s . *Disable Nixdorf ID Characters This bar code will not transmitS i e m e n s / N i x d o rf code identifiers. *Disable SANYO ID Characters Do ...
MetroSelect ™ E-11 Enable Manufacturer ID Prefix Transmits “METROLOGIC” before all barcode data to identify the scanner as aM e t rologic scanner. *Disable Manufacturer ID Prefix Will not transmit the identificationstring. *Disable “C” Prefix Enable “$” Prefix ID for UPC/EAN *Disable “$” Prefix ID f...
MetroSelect ™ Enable Tab Prefix The Scanner will transmit a TAB(ASCII 09H) before each bar code. *Disable Tab Prefix Will not transmit a TAB. *Disable SNI Beetle Mode Enable SNI Beetle Mode Enable Cipher 1021 IDs *Disable Cipher 1021 IDs E-12 116611 116601 116111 116101 116113 116103
MetroSelect ™ E-13 *Enable CR Suffix Disable CR Suffix Enable Tab Suffix *Disable Tab Suffix Will not transmit TAB (ASCII 09H)after each bar code. Disable LF Suffix *Enable LF Suffix Standard Suffix Characters When enabled, the scanner willtransmit a TAB (ASCII 09H) aftereach bar code. When enabled,...
MetroSelect ™ Enable ETX Suffix When ena bled, the scanner willtransmit E nd of T e X t (ASCII 03H) after the bar code data. *Disable ETX Suffix *Disable UPC Suffix ID Will not transmit a suffix afterUPC/EAN bar codes. Enable UPC Suffix ID When enabled, the sca nner willtransmit a suffix after any U...
MetroSelect ™ ~Configurable Suffix Character #1 ~Configurable Suffix Character #2 ~Configurable Suffix Character #4 ~Configurable Suffix Character #3 User Configurable Suffixes, All Data When chosen, a suffix ID can be addedand assigned for data transmission.Use this code with a 3 code bytesequence ...
MetroSelect ™ E-17 ~Configurable Suffix Character #5 ~Configurable Suffix Character #6 Assigns a fifth configurable suffix character. Assigns a sixth configurable suffix character. ~Configurable Suffix Character #7 ~Configurable Suffix Character #10 ~Configurable Suffix Character #9 ~Configurable Su...
MetroSelect ™ *Clear All User Configurable Suffixes E-18 999984
MetroSelect ™ UPC-EAN Formatting F-1 Codabar Formatting F-5 Code 39 Formatting F-6 Code 11 F-7 Telepen F-7 Plessey F-8 2 of 5 Code Formatting F-9 Section F Code Formatting F
MetroSelect ™ *Transmit UPC-A Check Digit Transmit UPC-E Check Digit *Do Not Transmit UPC-E Check Digit Expand UPC-E to 12 Digits Expand UPC-E bar codes to the 12 digitequivalent, UPC-A bar codes. *Do Not Expand UPC-E to 12 Digits Do not expand UPC-E to the 12 digitequivalent, UPC-A bar code. Do Not...
MetroSelect ™ Convert UPC-A to EAN-13 With this option, the scanner convert sUPC-A to EAN-13 by transmitting a lead-ing zero before the bar code. *Do Not Convert UPC-A to EAN-13 With this option, the scanner will notconvert UPC-A to EAN-13. Do Not Transmit Lead Zero on UPC-E This option will not tra...
MetroSelect ™ F-3 *Transmit UPC-A Number System Metrologic strongly discourages usingthis feature. Duplicate numbers mayresult in the database. Do Not Transmit UPC-A Number System Do Not Transmit UPC-A MFR# *Transmit UPC-A ITEM# Do Not Transmit UPC-A ITEM# *Transmit UPC-A MFR# 107511 107501 107611 1...
MetroSelect ™ F-5 Transmit Codabar Start/Stop Characters Transmits Codabar’s start/stop characters before and after each bar code. *Do Not Transmit Codabar Start/Stop Will not transmit Codabar’s start / s t o pcharacters before and after each barc o d e . *Do Not Enable CLSI Editing This option will...
MetroSelect ™ F-7 Transmit Code 11 Check Digit This bar code will transmit Code 11check characters when used withEnabled Code 11 in section A. *Do Not Transmit Code 11 Check Digit This bar code will not transmit Code 11 check characters. Code 11 107713 107703 Enable Convert Telepen ^L to E *Disable ...
MetroSelect ™ A parity bit is an extra data bit used to help catch data transmission errors.The scanner’s parity must match the host’s parity. Parity Features Select Space Parity to set the parity bit always 0. Select Even Parity to set the parity bit toeither a 1 or 0 to ensure an even num-ber of b...
MetroSelect ™ G-3 115200 BAUD Rate A “BAUD” or “BAUD Rate” is the speed at which data is transmitted. Select a BAUD for the scanner that matches the host device. 57600 BAUD Rate 19200 BAUD Rate 14400 BAUD Rate *9600 BAUD Rate 38400 BAUD Rate BAUD Rate 4158100 415890 415880 415870 415860 415850 Not s...
MetroSelect ™ G-5 8 Data Bits Number of data bits transmitted foreach character. *7 Data Bits *2 Stop Bits 1 Stop Bit Data/Stop Bits 116013 116003 116014 116004
MetroSelect ™ Enable RTS/CTS Handshaking *Disable RTS/CTS Handshaking Message RTS/CTS Activate/Deactivate RTS signal for eachc h a r a c t e r. *Character RTS/CTS Hardware Handshaking Activate RTS before sending the first char-acter and leave it active until after the lastcharacter has been transmit...
MetroSelect ™ G-7 Invert CTS Polarity (RSV2) +12v = Inactive, do not send-12v = Active, OK to send *Standard CTS Polarity -12v = Inactive, do not send+12v = Active, OK to send *Activate RTS, Wait for CTS Wait for CTS after activating RT S . Test CTS Not Present Before RTS (RSV4) Do not activate RTS ...
MetroSelect ™ Enable DTR Support When enabled the scanner will stop scanning when the Data Te rminal Ready(DTR) signal goes inactive. *Disable DTR Support Enable RTS Counter Toggle The scanner will toggle the RTS line on agood decode. *Disable RTS Counter Toggle 115817 115807 115915 115905 G-8
MetroSelect ™ G-9 Enable XON/XOFF Handshaking When enabled, the scanner will stoptransmission whenever an XOFF ( A S C I I 13H) is received. Tr a n s m i s s i o nwill resume after an XON (ASCII 11H) isre c e i v e d . *Disable XON/XOFF Handshaking The scanner will not test for XON/XOFF. *Disable AC...
MetroSelect ™ Enable 5 Retries on ACK/NAK Time Out Allow up to 5 NAK retransmissions ofthe data before dropping out of thecommunications loop. *Disable 5 Retries on ACK/NAK Time Out Do not limit retransmission to 5 NAKc y c l e s . Support BEL/CAN in ACK/NAK *Ignore BEL/CAN in ACK/NAK When BEL (07H)...
MetroSelect ™ G-11 *Disable French PC Term Do not transmit in French PC Te rm mode. Enable French PC Term When enabled, the scanner transmits PC typem a k e / b reak scan codes instead of ASCII data characters. The scan codes match a WYSE French PC Te rm Te rminal Emulation. Miscellaneous 116110 116...
MetroSelect ™ Enable Keyboard Emulations H-1 Country/Scan Code Table Selects H-2 Keyboard/System Type H-4 Special Keyboard Features H-5 InterScan Code Delays H-8 Control Sets H-9 Section H Keyboard H
MetroSelect ™ H-1 *Enable Keyboard Wedge Emulation Use this with an external keyboard . Transmit in wedge mode to allow stan-d a rd PC Keyboards to communicatewhen no bar code data is available. Enable Stand-Alone Keyboard Emulation Use this with special stand-alone models thata re not cabled for an...
MetroSelect ™ *USA Keyboard Enable USA Keyboard. Switzerland Keyboard Enable Swiss Keyboard . Spain Keyboard Enable Spanish Keyboard. Italy Keyboard Enable Italian Keyboard. France Keyboard Enable French Keyboard. Germany Keyboard Enable German Keyboard. Country/Scan Code Table Selects 416240 416280...
MetroSelect ™ H-3 UK Keyboard Enable UK Keyboard. Belgium Keyboard Enable Belgium Keyboard. Japanese Keyboard IBM 4700 Financial Keyboard Enable IBM 4700 Financial Keyboard. Enable Japanese Keyboard. 416210 416200 4162100 416270
MetroSelect ™ PS/2 Keyboard Scan the above for PS/2 computer.(Includes IBM PC and compatible models30, 70, 8556) *AT Keyboard If using an AT computer, scan theabove. (Includes IBM PS/2 andcompatible models 50, 55, 60, 80) XT Keyboard If using an XT computer, scan the above. Keyboard/System Type 2162...
MetroSelect ™ H-5 Do Not Transmit F0H Break Code The scanner will not transmit the F0Hin the break-code sequence. *Transmit F0H Break Code The scanner will transmit the F0H in the break-code sequence. Transmit Cleanup Bit *Do Not Transmit Cleanup Bit Transmit Make Code Only Do not scan unless instru...
MetroSelect ™ Enable Alt Mode When enabled, the scanner willduplicate this keyboard sequence: Hold down ALT key: Type decimal number thatcorresponds to the appropriate character. *Disable Alt Mode Caution: If host software application uses the right Alt key as a “Hot” key.Alt mode must be disabled. ...
MetroSelect ™ H-9 Disable Control Set #1 Enable Control Set #1 Control Sets In general, standard bar code symbologies will only encode the ASCII character set. Function keys, arrow keys andmany other “extended” keys on an IBMcompatible keyboard do not translate to ASCII characters. One method of“bar...
MetroSelect ™ 0AH 0BH 0CH 0DH 0EH0FH 10H 11H12H13H14H15H 16H 17H18H19H1AH 1BH 1CH 1DH 1EH1FH LF VTFF CR SO SI DLE DC1 DC2DC3DC4 NAK SYN ETB CAN EM SUB ESC FS GS RS US Caps LockShift TabAltEnterControlUp ArrowF1F2F3F4F5F6F7F8F9F10HomeEscPage UPPage DownPrint ScreenEnd ASCII (HEX) ASCII Control Extend...
MetroSelect ™ OCIA I-1 Load OCIA Defaults I-1 DTS/Nixdorf I-1 DTS/Siemens I-1 NCR-S I-1 NCR-F I-1 Section I OCIA I
MetroSelect ™ I-1 Enable OCIA Mode *Enable DTS/Nixdorf Enable NCR-F Enable NCR-S Load OCIA Defaults Enable DTS/Siemens 217736 217726 415544 999993 217706 217716 Select this option if communicationsrequires OCIA (Optically CoupledInterface Adapter). This serial inter -face is clocked by the host.
MetroSelect ™ J-1 Spaces High Transmit Code 39 All bar codes will be decoded thentransmitted as code 39 bar codes. *Transmit as Scanned All bar codes will be decoded andtransmitted in that symbology. *Bars High Enable Light Pen Mode Select this option if the scanner will beused in place of a light p...
MetroSelect ™ J-3 ~Variable Narrow Element Width Sets the minimum x-dimension in 6 µ si n c rements. Scan this code followed by a 3digit code byte sequence found in SectionM. Refer to MultiCode Method on page iii. 500 µs Narrow Element Width This transmits at 500 µs Narrow e l e m e n tw i d t h . T...
MetroSelect ™ IBM 46xx Configuration IBM Port K-1 IBM Reserved Codes K-2 Section K K
MetroSelect ™ IBM Port 17B 3687-2 In Counter IBM Port 9B 4500 CCD HH BCRI IBM Port 5B 1520 HH Laser IBM Port Load 46xx IBM Defaults Load default format settings for the IBM 46xx systems . Enable IBM 46xx Communication Select this option for IBM 46XXSIOC/RS485 communications. Not allscanners support ...
MetroSelect ™ Section L Activation Range L-1 CodeGate ™ Status L-2 Laser/Scan Modes L-3 Same Symbol Time Outs L-4 MS9500 Voyager ™ L
MetroSelect ™ Activation Range L-1 *Long Range in Stand Short Range in Stand Short Range out of Stand *Long Range out of Stand Use these bar codes to select infrared (IR) sensor activation range for sensing when objects are placed in the scan field. 118705 118715 118701 118711
MetroSelect ™ L-2 CodeGate Active in the Stand Use the following to control button functions. *CodeGate Inactive in the Stand CodeGate Inactive Out of Stand *CodeGate Active Out of Stand CodeGate ™ Status 118707 118717 118713 118703
MetroSelect ™ L-3 *Normal Scan Continuous Blinky Scan Custom (One Shot) Scan Blinky Scan Laser/Scan Modes 418304 418324 418334 418344 Laser turns on after the IR senses abar code. The laser remains on forapproximately 3 to 10 seconds. Laser turns on after the IR senses abar code. The laser will blin...
MetroSelect ™ Section M Code Byte Usage M-1 Code Bytes 0-5 M-2 Code Bytes 6-9 M-3 Reserved Codes M-4 Code Byte/Code Type Table M-5 ASCII Reference Table M-6 Extended Key Code Reference Table M-11 Code Bytes M
MetroSelect ™ M-3 Code Byte 6 Code Byte 7 Code Byte 8 Code Byte 9 Code Bytes 6-9 6 7 8 9
MetroSelect ™ M-4 ~Enable Reserved Code ~Disable Reserved Code Reserved Codes 999988 999987 Contact Metrologic for informationabout this feature.
MetroSelect ™ 000102030405060708090A0B0C0D0E0F10111213141516171819 ASCII Reference Table 000001002003004005006007008009010011012013014015016017018019020021022023024025 NULSOHSTXETXEOTENQACKBELBSHTLFVTFFCRSOSIDLEDC1DC2DC3DC4NAKSYNETBCANEM @ABCDEFGHIJKLMNOPQRSTUVWXY HEX Value Decimal Value/ Code Byte ...
MetroSelect ™ M-7 ASCII Reference Table HEX Value Decimal/ Code Byte Value Character Control Keyboar d EQV 026027028029030031032033034035036037038039 040041042043044045 046047048049050051 SUBESCFSGS RSUSSP!“#$ %& ‘()*+, -. /01 23 Z[\^_space, blank apostrophe commaminusperiod number zeronumber on...
MetroSelect ™ ASCII Reference Table HEX Value Decimal/ Code Byte Value Character Control Keyboard EQV 3435363738393A3B3C3D3E3F404142434445464748494A4B4C4D 052053054055056057058059060061062063064065066067068069070071072073074075076077 456789:;<=>?@ABCDEFGHIJKLM less than greater than shift P le...
MetroSelect ™ M-9 ASCII Reference Table HEX Value Decimal/ Code Byte Value Character Control Keyboard EQV 4E4F505152535455565758595A5B5C5D5E5F6061 62 6364656667 078079080081082083084085086087088089090091092093094095096097098099100101102103 NOPQRSTUVWXYZ[\]^_‘abcdefg letter O shift Kshift Lshift Mà, ...
MetroSelect ™ M-11 Extended Key Code Reference Table Key At Scan Code XT/PS2 Scan Code Prefix/Suffix Value Hex = Decimal InsertDeleteHomeEnd Page UpPage DownRight AltRight CtrlReservedReservedNumeric Keypad EnterNumeric Keypad /F1F2F3F4 F5 F6F7F8F9F10 05H 06H04H0CH03H0BH83H0AH01H09H 3BH 3CH 3DH 3EH ...
MetroSelect ™ Extended Key Code Reference Table Key At Scan Code XT/PS2 Scan Code Prefix/Suffix Value Hex = Decimal F11F12Numeric +Numeric - Numeric *Caps LockNum LockLeft Alt Left CtrlLeft ShiftRight Shift 78H07H79H 7BH 7CH58H77H11H14H12H59H 57H58H 4EH 4AH37H3AH45H38H1DH2AH36H 9AH = 1549BH = 155 9C...
MetroSelect ™ Section N Custom Defaults N-1 Serial Program Mode N-3 Miscellaneous Features N
MetroSelect ™ Custom Defaults Enable Factory Defaults 846600 Metrologic manufatures several scanners for OEM applications. These scanners may use a differentset of defaults than Metrologic factory defaults. Scanning the bar code will reset the default table toMetrologic defaults. Recall Defaults 999...
MetroSelect ™ Ruby Verifone Defaults 84661280 RCH 84660010 Sanyo 84660020 Gilbarco 84660030 ALT Defaults 84660040 Scan this code followed by “RecallDefaults” code to enable and load Ruby Verifone Defaults. Scan this code followed by “RecallDefaults” code to enable and load RCH Defaults. Scan this co...
MetroSelect ™ N-3 For Serial Program Mode, all commands must be framed by an STX (02 Hex) and ETX (03 Hex). To recall defaults:1) Transmit <STX>999999<ETX> through the Serial Port. This will put the scanner in serial program mode. Scanning will be suspended and the scanner will respond w...
Metrologic Manuals
-
Metrologic MS6130 MX003
Manual
-
Metrologic IS4920
Manual
-
Metrologic MLPN 2159
Manual
-
Metrologic MS9590i
Manual
-
Metrologic MS1890
Manual
-
Metrologic MS9590
Manual
-
Metrologic MS9535
Manual
-
Metrologic VoyagerCG MS9500
Manual
-
Metrologic MS7600
Manual
-
Metrologic MS770
Manual
-
Metrologic SP5500
Manual
-
Metrologic MX003
Manual
-
Metrologic MS7580
Manual
-
Metrologic MS2220
Manual
-
Metrologic IS4110
Manual
-
Metrologic MS9540
Manual
-
Metrologic 1070
Manual
-
Metrologic IS4815
Manual
-
Metrologic MS5100
Manual
-
Metrologic MS3780
Manual