Marshall OR-841-HDSDI - Manuals

Marshall OR-841-HDSDI – Manual in PDF format online.

Manuals:

Manual

Manual Marshall OR-841-HDSDI

Summary

Page 2 - Contents; Product Overview; User-Definable Function Buttons; Rear Panel Features

Contents Product Overview ............................................................................................................................................................................. 3 Features ............................................................................................

Page 3 - The Orchid; High Resolution 8.4” Panel; a nominal brightness of 400 cd/m; Real-time Color Vectorscope; and transparency options. The Waveform Monitor not only monitors; ClipGuide

Product Overview The Orchid OR-841-HDSDI is a single 8.4” fully featured camera-top and field monitor system. The OR-841- HDSDI offers built-in Waveform Monitor, Vectorscope, Audio Bars, Built In Speaker with audio outputs, and several diagnostic tools. This monitor is ideal for use as a camera top ...

Page 4 - Precision White Balance with Color Temperature Adjustment; system solves this problem.; Select color temperature and gamma mode; ratios used in broadcast environments.; De-embeds and displays up to 16 channels of audio using sixteen

Precision White Balance with Color Temperature Adjustment White balance adjustment is essential in order to render colors correctly. To display colors correctly, gray scale should maintain identical color temperature. The white balance for ORCHID monitors defaults to D65 (6500K) so the user does not...

Page 5 - Installation and Initial Setup; Unpacking; • 12V 4A XLR Power Supply with 4-Pin Female XLR Connector; Mounting; Side Handle

Installation and Initial Setup Unpacking Carefully unpack the OR-841-HDSDI monitor and verify that the following items are included: • OR-841-HDSDI Monitor • 12V 4A XLR Power Supply with 4-Pin Female XLR Connector • Operating Instructions Inspect the unit for any physical damage that may have occurr...

Page 6 - The available functions are:; ROTOMENU Control; Front Panel Features

Power Button with Indicator Press power switch to turn on the Unit. The indicator LED will turn Green. Press again to put the OR-841-HDSDI into standby mode. The LED will turn Red. Tri-Color Tally Light 30mm Tri-Color tally lamp controlled via the Remote connector on the rear of the unit. User-Defin...

Page 7 - Parallel Remote RJ-45; GND; GPI Input; the DC input is correct:; Audio Output

Rear Panel Features Parallel Remote RJ-45 Pin Assignments Pin 1 GPI 1 Pin 2 GPI 2 Pin 3 GPI 3 Pin 4 GPI 4 Pin 5 GND Pin 6 GPI 5 Pin 7 GPI 6 Pin 8 GPI 7 GPI Input RJ-45 connector for 7 user-assignable GPI inputs. Assignable using the on-screen menu. Service Port Proprietary connection used for firmwa...

Page 8 - Format

OR-841-HDSDI Compatible Formats 8 Format HD/SD-SDI 480 / 60i ü 576 / 50i ü 480 / 60p 576 / 50p 720 / 60p ü 720 / 50p ü 720 / 30p ü 720 / 25 ü 720 / 24p ü 1080 / 60p 1080 / 50p 1080 / 60i (30PsF) ü 1080 / 50i (25PsF) ü 1080 / 48i (24Psf) ü 1080 / 30p ü 1080 / 25p ü 1080 / 24p ü VGA SVGA XGA SXGA UXGA...

Page 12 - MENU; • Step through menu items by using the RotoMenu control.; INFO SUBMENU; The INFO Submenu is a read-only display that gives the user; PICTURE SUBMENU

On-Screen Menu (continued) REMOTE PIN 1 THRU 8 (Pin 5 is Ground) R TALLYG TALLYB TALLYLEFT R TALLYLEFT G TALLYLEFT B TALLYRIGHT R TALLYRIGHT G TALLYRIGHT B TALLY SETUP RETURN FORMAT DISP AUTO / ON / OFF TIMECODE OFF / LITC / VITC1 / VITC2 POWER SAVE ALWAYS ON 2 MIN5 MIN10 MIN30 MIN 1 HOUR2 HOUR KEY ...

Page 13 - COLOR SUBMENU; Use this setting to choose between color temperature presets:; return to the original setting.

Contrast • Varies between 0 and 100 (80 is standard). • 80 is default value with 100% gain of video signal. Saturation • Varies between 0 and 100 (50 is standard). • 50 is default value with nominal color saturation. • Setting to 0 should display as monochrome. • Increasing value will increase color...

Page 14 - SCREEN SUBMENU; Scan; its original format.; Shift H

SCREEN SUBMENU ■ Scan Normal (Zero Scan) • Whole picture should be visible without any cropping. • When in normal mode, it should not see non-active areas such as SAV, EAV. Over (End-User TV Production Scan) • 5% of the picture is cropped and zoomed to fill the screen. • After cropping, it will main...

Page 15 - MARKER CONFIGURATION SUBMENU; Use this setting to enable or disable all on-screen markers.

■ Shift V Use the RotoMenu control to change the value of this setting, which will shift the picture Vertically. Negative values will move the picture DOWN, while Positive values will move the picture UP. MARKER CONFIGURATION SUBMENU ■ Marker Use this setting to enable or disable all on-screen marke...

Page 16 - AUDIO CONFIGURATION SUBMENU

■ Level Meter Selects whether or not to display audio level meters. ■ Meter Background Selects whether or not to display meter background. ■ Display Channels Selects how many audio meters you want to display. You may select any number of channels from 1 to 16. ■ Active Channel Only Allows a choice o...

Page 17 - WAVEFORM SUBMENU; Use this menu to choose from several available preset

■ Save CH Preset To > Use this menu to select which one of 8 memory locations where the user wants to store the current channel output assignments. ■ CH Preset Use this menu to Lock or Unlock the ability to save to the Ch Preset memory locations. This helps to prevent accidental overwriting of st...

Page 18 - • Chroma (C) displayed over Color video

VECTORSCOPE SUBMENU ■ Layout Use this menu to choose from several available preset screen layouts. Choosing any of the preset layouts will override the settings in the Vectorscope, Size, and Position menus. ■ Vectorscope Use this menu to turn the Vectorscope display On or Off when in the Normal mode...

Page 21 - TimeCode; VITC1 will be identical to each other.; Power Save; Pressing any front panel keys will wake up the monitor.; Key Lock; Backup User Configuration; Restore User Configuration; • Resetting default will not effect backed up data.; Backup User Configuration

■ TimeCode Selects among to following options: OFF / LTC / VITC1 / VITC2. In the most cases, the value of LTC and VITC1 will be identical to each other. ■ Power Save • When enabled, the monitor will go to sleep after a predefined time has passed when loss of picture occurs. • When a valid video form...

Page 22 - Specifications; PANEL

Specifications Screen Size 8.4” Diagonal Display Area (h x v) 6.7” x 5” Aspect Ratio 4:3 Pixels 1024 x 768 Color Depth 8-bit (16.7M colors) Viewing Angle (h x v) 85 ° + 85 ° (H) 50° + 60° (V) Brightness 400 cd/m2 Contrast Ratio 400:1 Dimensions (w x h x d) 8.6” x 8.2” x 1.7” Weight (Monitor Only) 4....

Page 23 - Maintenance / Color Calibration Procedure; Color Calibration Procedure; an error message and the screen will default to previous settings.

23 Maintenance / Color Calibration Procedure ■ Screen Cleaning Periodically clean the screen surface using ammonia-free cleaning wipes (Marshall Part No. V-HWP-K). A clean micro-fiber cloth can also be used using only non-abrasive and ammonia-free cleaning agents. Do not use paper towels. Paper towe...

Page 24 - Warranty; Marshall Electronics warranties to the first consumer that this

Warranty Marshall Electronics warranties to the first consumer that this OR-841-HDSDI LCD monitor will (under normal use) be free from defects in workmanship and materials, when received in its original container, for a period of one year from the purchase date. This warranty is extended to the firs...