Makita TD0101F - Manuals

P 7/ 14 R epair [3] DISASSEMBLY/ASSEMBLY[3]-3. Hammer Section DISASSEMBLING (1) Disassemble Hammer case section from the machine. (Figs. 2 and 3)(2) Remove Hammer from Hammer case complete. (Fig. 4) (3) Disassemble Hammer section as illustrated in Figs. 11 to 14. 2. Hold Hammer section as illustrate...

P 8/ 14 R epair [3] DISASSEMBLY/ASSEMBLY[3]-3. Hammer Section (cont.) ASSEMBLING Take the disassembling step in reverse.Note: Make sure that the place equivalent to one piece of Steel ball 3 has to be in Hammer when all 24 pieces of Steel ball 3 are set in place. Refer to Fig. 15. Fig. 15 Hammer the...

C ircuit diagram P 9/ 14 Power supply cord Black Lead wire is used for some countries Black Lead wire is used for somecountries White Lead wireis used for some countries White Lead wire is used for some countries Brush holder * Switch * Switch Brush holder * Field * Field * The above illustrated Fie...

W iring diagram P 10/ 14 Housing set (L) Holder arm Guide Field lead wires (purple, orange)inside the rib of Holder arm to avoidpinching between Housing set (R) andHolder arm. rib ofHolder arm rib Field leadwire (white) lead wireholder onSwitch Guide the Lead wires of power supply cord betweenRibs. ...