Makita Chain Saw - Manuals - manualsarea.com

Page 2 - Check idling speed; speed; Adjusting the carburetor; STOP

23 Checking the chain lubrication N Never work with the chain saw withoute sufficient chain lubrica-tion. Otherwise the service life of the chain and guide bar will bereduced.Before starting work check the oil level in the tank and the oil feed.Check the oil feed rate as described below:- Start the ...

Page 3 - Working in winter; MAINTENANCE; Sharpening the saw chain; subfreezing operation; The chain needs sharpening when:; The chain penetrates the wood only under great pressure.

24 ✓ ✓ A Working in winter B In order to prevent carburetor icing in conditions of low temper-ature combined with high humidity, and in order to get up tooperating temperature faster in subfreezing temperatures,heated air can be taken from the cylinder (marking (circled) oninsert in "snowflake&#...

Page 4 - Files and how to work with them; Always guide the file horizontally (90; Grease gun

25 E Files and how to work with them - Use a special round file for chains (dia. 4 mm) for sharpe-ning the chain. Normal round files are not appropriate forthis work. See "Accessories" for the order number. - The file should cut only when pushed forwards (arrow).Lift the file when leading it...

Page 5 - Cleaning the brake band and sprocket interior; CAUTION: Before doing any work on the guide bar or; Replacing the suction head

26 Cleaning the brake band and sprocket interior A 1 2 3 4 5 6 7 STOP CAUTION: Before doing any work on the guide bar or chain, always switch off the engine and pullthe plug cap off the spark plug (see "Replacingthe spark plug"). Always wear protective gloves! CAUTION: Start the chain saw on...

Page 6 - Pull the starter cable hard.; Cleaning the air filter; Cover the carburetor with a clean cloth.; Let the air filter dry completely.; Put the top and bottom sections back together.; Replacing the spark plug

27 Electrode gap The electrode gap must be .020" (0.5 mm). Checking the ignition spark - Press the loosened spark plug with the ignition cable firmlyconnected against the cylinder using insulated pliers(not near the spark plug opening). - ON/OFF switch in the "I" (ON) position. - Pull th...

Page 7 - Instructions for daily and periodic maintenance; Service, spare parts and guarantee; Maintenance and repair

28 Instructions for daily and periodic maintenance To ensure a long servicelife and to prevent any damage the maintenance work described in the following must be performedregularly. The product guarantee will be automatically invalidated if this maintenance is not carried out regularly and according...

Page 8 - Spare parts; Troubleshootig

29 Malfunction System Observation Cause Chain does not run Chain brake Engine runs Chain brake actuated. Engine does not start or Ignition system Ignition spark Malfunction in fuel supply system, com- only with difficulty pression system, mechanical malfunction. No ignition spark Switch on STOP, fau...

Page 9 - Extract from the spare parts list

30 1 2 3 4 6 5 7 8 9 10 11 12 13 21 23 22 24 25 26 27 18 19 17 16 (2) 15 (2) 20 14 Extract from the spare parts list Use only original MAKITA parts. For repairs and replacement of other parts, seeyour MAKITA service center. Accessories (not delivered with the chain saw) 21 953 100 090 1 Chain gauge ...

Makita Chain Saw - Manuals

Manuals:

Manual Makita Chain Saw

Summary

Makita Manuals