Makita JR3030T - Manual - manualsarea.com

Page 2 - SPECIFICATIONS; GENERAL SAFETY RULES; Read and understand all instructions.; Failure to follow all; SAVE THESE INSTRUCTIONS; Work Area; Electrical Safety

2 SPECIFICATIONS • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. GENERAL SAFETY RULES USA002-2 (For All Tools) WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in...

Page 4 - SPECIFIC SAFETY RULES

4 SERVICE 23. Tool service must be performed only byqualified repair personnel. Service or main- tenance performed by unqualified personnelcould result in a risk of injury. 24. When servicing a tool, use only identicalreplacement parts. Follow instructions inthe Maintenance section of this manual. U...

Page 6 - ASSEMBLY

6 FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool is switched off andunplugged before adjusting or checking function on thetool. Adjusting the shoe When the blade loses its cutting efficiency in one place alongits cutting edge, reposition the shoe to utilize a sharp, unusedportion of ...

Page 7 - Installing or removing the saw blade

7 Installing or removing the saw blade CAUTION: • Always clean out all chips or foreign matter adhering tothe blade, blade clamp and/or slider. Failure to do somay cause insufficient tightening of the blade, resultingin a serious injury. For JR3030 To install the blade, loosen the screw on the blade...

Page 8 - OPERATION

8 For JR3030T To install the saw blade, always make sure that the bladeclamp sleeve is in released position before inserting the sawblade. If the blade clamp sleeve is in fixed position, rotate thesleeve to the released position. Insert the saw blade into the blade clamp as far as it will go.The bla...

Page 9 - MAINTENANCE; Replacing carbon brushes

9 • Always use a suitable coolant (cutting oil) when cuttingmetal. Failure to do so will cause premature blade wear. Press the shoe firmly against the workpiece. Do not allow thetool to bounce. Bring the blade into light contact with theworkpiece. First, make a pilot groove using a slower speed.Then...

Page 10 - ACCESSORIES

10 ACCESSORIES CAUTION: • These accessories or attachments are recommended foruse with your Makita tool specified in this manual. Theuse of any other accessories or attachments mightpresent a risk of injury to persons. Only use accessoryor attachment for its stated purpose. If you need any assistanc...

Page 11 - Memo

Page 14 - Your answers to the following questions are appreciated.; Certificate of Warranty

14 Your answers to the following questions are appreciated. Date Purchased Model No. Serial No. Initial Last Name Street Address City Province AGE: Male Female Married Single Month Day Year 20 Under 19 20-29 30-39 40-49 Over 50 Paste Paste Paste Paste Paste Paste Paste Paste P aste P aste P aste P a...

Page 15 - Factory Service Centres; CUSTOMER RECORD

15 Factory Service Centres For the authorized service centre nearest you please refer to the local yellow pages directory under “tools” or con-tact our customer service department (Tel) 1-800-263-3734 When you need service... • Explain the problem in a letter • Enclose the letter with the tool • Pac...

Page 16 - Warranty Policy; MAKITA LIMITED ONE YEAR WARRANTY; Makita Corporation of America

Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects fromworkmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop duringthis one year period, return the COMPLE...

Makita JR3030T - Manual

Table of Contents:

Other Manuals for Makita JR3030T

Summary

Other Makita Models