Makita Chain Saw - Manual
Makita Chain Saw – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Check idling speed; speed; Adjusting the carburetor; STOP
- Page 3 – Working in winter; MAINTENANCE; Sharpening the saw chain; subfreezing operation; The chain needs sharpening when:; The chain penetrates the wood only under great pressure.
- Page 4 – Files and how to work with them; Always guide the file horizontally (90; Grease gun
- Page 5 – Cleaning the brake band and sprocket interior; CAUTION: Before doing any work on the guide bar or; Replacing the suction head
- Page 6 – Pull the starter cable hard.; Cleaning the air filter; Cover the carburetor with a clean cloth.; Let the air filter dry completely.; Put the top and bottom sections back together.; Replacing the spark plug
- Page 7 – Instructions for daily and periodic maintenance; Service, spare parts and guarantee; Maintenance and repair
- Page 8 – Spare parts; Troubleshootig
- Page 9 – Extract from the spare parts list
Chain Saw
Safety Instructions
Maintenance
Information
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
23 Checking the chain lubrication N Never work with the chain saw withoute sufficient chain lubrica-tion. Otherwise the service life of the chain and guide bar will bereduced.Before starting work check the oil level in the tank and the oil feed.Check the oil feed rate as described below:- Start the ...
24 ✓ ✓ A Working in winter B In order to prevent carburetor icing in conditions of low temper-ature combined with high humidity, and in order to get up tooperating temperature faster in subfreezing temperatures,heated air can be taken from the cylinder (marking (circled) oninsert in "snowflake&#...
25 E Files and how to work with them - Use a special round file for chains (dia. 4 mm) for sharpe-ning the chain. Normal round files are not appropriate forthis work. See "Accessories" for the order number. - The file should cut only when pushed forwards (arrow).Lift the file when leading it...
