Makita DA391D - Manual - manualsarea.com

Page 2 - SPECIFICATIONS; GENERAL SAFETY RULES; Read and understand all instructions.; Failure to follow all; SAVE THESE INSTRUCTIONS

2 SPECIFICATIONS • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. GENERAL SAFETY RULES USA003-1 (FOR All BATTERY OPERATED TOOLS) WARNING: Read and understand all instructions. Failure to follow all instructions listed bel...

Page 4 - SPECIFIC SAFETY RULES

4 SERVICE 21. Tool service must be performed only byqualified repair personnel. Service or main- tenance performed by unqualified personnelmay result in a risk of injury. 22. When servicing a tool, use only identicalreplacement parts. Follow instructions inthe Maintenance section of this manual. Use...

Page 5 - Tips for maintaining maximum battery life

5 IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CARTRIDGE ENC004-1 1. Before using battery cartridge, read allinstructions and cautionary markings on(1) battery charger, (2) battery, and (3)product using battery. 2. Do not disassemble battery cartridge. 3. If operating time has become excessivelyshorter...

Page 7 - Reversing switch action; Overload protector; ASSEMBLY; Installing or removing driver bit or drill bit

7 Reversing switch action This tool has a reversing switch to change the direction ofrotation. Move the reversing switch lever to the “FWD” posi-tion for clockwise rotation or the “REV” position for counter-clockwise rotation. When the reversing switch lever is in the neutral position, theswitch tri...

Page 8 - OPERATION; Screwdriving operation

8 OPERATION Screwdriving operation Place the point of the driver bit in the screw head and applypressure to the tool. Start the tool slowly and then increasethe speed gradually. Release the trigger just as the screwbottoms out. If the trigger is not released, the screw may stripout the hole or the s...

Page 9 - MAINTENANCE; Recycling the Battery

9 damage the tip of your bit, decrease the toolperformance and shorten the service life of the tool. • There is a tremendous force exerted on the tool/bit at thetime of hole break through. Hold the tool firmly and exertcare when the bit begins to break through the workpiece. • A stuck bit can be rem...

Page 10 - ACCESSORIES

10 ACCESSORIES CAUTION: • These accessories or attachments are recommended foruse with your Makita tool specified in this manual. Theuse of any other accessories or attachments mightpresent a risk of injury to persons. Only use accessoryor attachment for its stated purpose. If you need any assistanc...

Page 11 - Memo

Page 14 - MAIL THIS PORTION; Your answers to the following questions are appreciated.; Please return this portion by facsimile or mail.

14 1. This product was purchased from: Home Center Hardware/Lumber Store Tool Distributor Industrial Supply Construction Supply Other ( ) 3. How did you learn about this product: Magazine From Dealer Newspaper Store Display Catalog Radio Exhibition From Friend Previous Usage Other ( ) 2. Use of the ...

Page 15 - FACTORY SERVICE CENTERS; RETAIN THIS PORTION FOR YOUR RECORDS

15 FACTORY SERVICE CENTERS 1-800-4-MAKITA RETAIN THIS PORTION FOR YOUR RECORDS ARIZONA 3707 E. Broadway Rd., Ste. 6 Phoenix, AZ 85040 (602) 437-2850 CALIFORNIA 41850 Christy St. Fremont, CA 94538-5107 (510) 657-9881 14930 Northam St. La Mirada, CA 90638-5753 (714) 522-8088 1970 Fulton Avenue Sacrame...

Page 16 - WARNING; MAKITA LIMITED ONE YEAR WARRANTY; Warranty Policy; Makita Corporation

WARNING Some dust created by power sanding, sawing, grinding, drilling, and otherconstruction activities contains chemicals known to the State of Californiato cause cancer, birth defects or other reproductive harm. Some examplesof these chemicals are:• lead from lead-based paints, • crystalline sili...

Makita DA391D - Manual

Table of Contents:

Summary

Other Makita Models