Makita 2703 - Manual

Makita 2703

Makita 2703 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
Page: / 28

Table of Contents:

  • Page 2 – SPECIFICATIONS
  • Page 5 – ADDITIONAL SAFETY RULES
  • Page 6 – SAVE THESE INSTRUCTIONS.
  • Page 7 – • Always unplug the tool before assembly.; Installing saw blade; • Keep the flange surface clean of dirt or other adhering; ASSEMBLY
  • Page 8 – Installing blade guard; • Before installing the blade guard, adjust the depth of
  • Page 9 – Positioning table saw; Table saw stand; Storing accessories
  • Page 10 – Adjusting depth of cut; • Use a shallow depth setting when cutting thin materi-; Adjusting bevel angle; • After adjusting the bevel, be sure to tighten the lock; Adjusting positive stops
  • Page 11 – Installing and adjusting rip fence; Turn the adjusting nut counterclockwise a couple of
  • Page 12 – • Always grasp the striped portion of the wrench when; Switch action
  • Page 13 – Work helpers; OPERATION
  • Page 15 – Crosscutting; • When making a crosscut, remove the rip fence from; Miter gauge; ing arrangement, especially when cutting at an angle.; Use of miter gauge
  • Page 16 – Ripping; Adjust the depth of cut a bit higher than the thickness
  • Page 18 – • Always be sure that the tool is switched off and; Cleaning; MAINTENANCE
  • Page 19 – • These accessories or attachments are recommended; Dado head set; Dado outer flange; ACCESSORIES
  • Page 20 – Table insert
  • Page 23 – How to perform rabbeting; the blade guard as before.; with a table saw stand.
  • Page 26 – MAIL THIS PORTION; Your answers to the following questions are appreciated.; Please return this portion by facsimile or mail.
  • Page 27 – FACTORY SERVICE CENTERS; RETAIN THIS PORTION FOR YOUR RECORDS
  • Page 28 – WARNING; MAKITA LIMITED ONE YEAR WARRANTY; Warranty Policy; Makita Corporation of America
Loading the manual

With Electric Brake

210 mm (8-1/4”)

MODEL 2702X1
MODEL 2702

255 mm (10”)

MODEL 2703X1
MODEL 2703

Table Saw

w w w . m a k i t a . c o m

I N S T R U C T I O N M A N U A L

DOUBLE
INSULATION

WARNING: For your personal safety, READ and UNDERSTAND before using.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Manuals for Makita 2703

Summary

Page 2 - SPECIFICATIONS

2 MODEL Arbor hole Blade diameter Cutting capacities 90 ° 45 ° Table size (W x L) No load speed (RPM) Dimensions (L x W x H) Maximum dado capacity Net weight 18kg (40 lbs) 4,600/min 560mm x 686mm x 458mm (22" x 27" x 18") 686mm x 560mm (27" x 22") 2702X127022703X12703 5/8" 13...

Page 5 - ADDITIONAL SAFETY RULES

5 1. Wear eye protection. 2. Don’t use the tool in presence of flam- mable liquids or gases. 3. NEVER use the tool with an abrasive cut-off wheel installed. 4. Check the blade carefully for cracks or damage before operation. Replace cracked or damaged blade immediately. 5. Clean the spindle, flanges...

Page 6 - SAVE THESE INSTRUCTIONS.

6 18. Do not perform any operation freehand. Freehand means using your hands to sup- port or guide the workpiece, in lieu of a rip fence or miter gauge. 19. NEVER reach around or over saw blade. NEVER reach for a workpiece until the saw blade has completely stopped. 20. Avoid abrupt, fast feeding. F...

Other Makita Models