Makita BO6050J - Manuals

5 ENGLISH Number Orbits per min. Pad rotating speed per minute in random orbit with forced rota- tion mode 1 1,600 140 2 2,900 260 3 4,200 370 4 5,500 490 5 6,800 600 NOTICE: If the tool is operated continuously at low speeds for a long time, the motor will get overloaded, resulting in tool malfunct...

6 ENGLISH Material Use Mode selection Speed control setting Pad Random orbit with forced rotation Random Metals Non- ferrous metal (alumi- num, copper) 1 - 3 Soft Steel - 3 - 5 Soft/ Hard Steel, rust removal - 4 - 5 Super Soft Hard metal (stain- less steel) - 4 - 5 Soft Polishing Use Mode selection ...

7 ENGLISH 1 1. Abrasive disc To install the abrasive disc or the hook-and-loop type pad (optional accessory), first remove all dirt and for - eign matter from the pad. Then attach the abrasive disc to the pad, using the hook-and-loop system of the abrasive disc and the pad. Be careful to align the h...

8 ENGLISH OPERATION CAUTION: Only use Makita genuine abrasive discs and pads for sander (optional accessories). CAUTION: Never switch on the tool when it is in contact with the workpiece, it may cause an injury to operator. CAUTION: Make sure the work material is secured and not unstable. Falling ob...