Makita BDF460 - Manuals

10 • Check the sound of cooling fan, vent on the charger andbattery, which can be sometime clogged with dust. • The cooling system is in order although no sound ofcooling fan comes out, if the yellow warning light will notflash. • Always keep clean the vent on charger and battery forcooling. • The p...

13 ASSEMBLY CAUTION: • Always be sure that the tool is switched off and thebattery cartridge is removed before carrying out anywork on the tool. Installing side grip (auxiliary handle) CAUTION: • Always be sure that the side grip is installed securelybefore operation. Always use the side grip to ens...

14 Adjustable depth rod The adjustable depth rod is used to drill holes of uniformdepth. Loosen the clamp screw, set to desired position, thentighten the clamp screw. OPERATION CAUTION: • Always insert the battery cartridge all the way until itlocks in place. If you can see the red part on the upper...

15 • If the tool is operated continuously until the batterycartridge has discharged, allow the tool to rest for 15minutes before proceeding with a fresh battery. Drilling operation First, turn the adjusting ring so that the pointer points to the marking. Then proceed as follows. Drilling in wood Whe...

16 • Always secure small workpieces in a vise or similar hold-down device. • If the tool is operated continuously until the batterycartridge has discharged, allow the tool to rest for 15minutes before proceeding with a fresh battery. MAINTENANCE CAUTION: • Always be sure that the tool is switched of...

17 EN0001-1 Recycling the Battery The only way to dispose of a Makita battery is to recycle it.The law prohibits any other method of disposal. To recycle the battery: 1. Remove the battery from the tool. 2. a) Take the battery to your nearest Makita Factory Ser-vice Center or b) Take the battery to ...

22 Your answers to the following questions are appreciated. Date Purchased Model No. Serial No. Initial Last Name Street Address City Province AGE: Male Female Married Single Month Day Year 20 Under 19 20-29 30-39 40-49 Over 50 Paste Paste Paste Paste Paste Paste Paste Paste P aste P aste P aste P a...

23 Factory Service Centres For the authorized service centre nearest you please refer to the local yellow pages directory under “tools” or con-tact our customer service department (Tel) 1-800-263-3734 When you need service... • Explain the problem in a letter • Enclose the letter with the tool • Pac...

Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects fromworkmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop duringthis one year period, return the COMPLE...