Lincoln Electric LA-17 - Manuals

Page 2 - SAFETY; WARNING; CALIFORNIA PROPOSITION 65 WARNINGS; The Above For Diesel Engines

LINCOLN ELECTRIC FOR ENGINEpowered equipment. 1.a. Turn the engine off before troubleshooting and maintenance work unless the maintenance work requires it to be running. ____________________________________________________ 1.b. Operate engines in open, well-ventilated areas or vent the engine exhaus...

Page 3 - ii

LINCOLN ELECTRIC ii SAFETY ii ARC RAYS can burn. 4.a. Use a shield with the proper filter and cover plates to protect your eyes from sparks andthe rays of the arc when welding or observingopen arc welding. Headshield and filter lensshould conform to ANSI Z87. I standards. 4.b. Use suitable clothing ...

Page 4 - iii

LINCOLN ELECTRIC FOR ELECTRICALLYpowered equipment. 8.a. Turn off input power using the disconnect switch at the fuse box before working onthe equipment. 8.b. Install equipment in accordance with the U.S. National Electrical Code, all local codes and the manufacturer’srecommendations. 8.c. Ground th...

Page 5 - iv; PRÉCAUTIONS DE SÛRETÉ

LINCOLN ELECTRIC iv SAFETY iv PRÉCAUTIONS DE SÛRETÉ Pour votre propre protection lire et observer toutes les instructions et les précautions de sûreté specifiques qui parraissent dans ce manuel aussi bien que les précautions de sûreté générales suiv- antes: Sûreté Pour Soudage A L’Arc 1. Protegez-vo...

Page 6 - By Lincoln Electric; TORCH/REPLACEMENT PARTS; Item

TM By Lincoln Electric LA-9 MODELS AIR-COOLED 125 AMPS TORCH/REPLACEMENT PARTS Item Part Industry Description No. Reference 1 S19258-1 — Torch body with gaskets, LA-9 2 S19511-1 — Torch handle, LA-9 3 S19512-2 57Y01-2 Power cable and gas, 12 1 / 2 ’ (3.8m) 3 S19512-4 57Y03-2 Power cable and gas, 25’...

Page 7 - TYPICAL CURRENT RANGES FOR TUNGSTEN ELECTRODES

CHART 1 — Select tungsten diameter and alumina nozzle based on current and application. TYPICAL CURRENT RANGES FOR TUNGSTEN ELECTRODES (1) AC DCEN (-) DCEP (+) Balanced Wave Unbalanced Wave Tungsten Pure and Pure and 1%, 2% 1%, 2% Electrode 1%. 2% 1%, 2% Thoriated Thoriated Alumina Diameter Thoriate...

Page 9 - Short; Not recommended for use with high frequency current.

CHART 4 — Select tungsten diameter and alumina nozzle based on current and application. TYPICAL CURRENT RANGES FOR TUNGSTEN ELECTRODES (1) AC DCEN (-) DCEP (+) Balanced Wave Unbalanced Wave Tungsten Pure and Pure and 1%, 2% 1%, 2% Electrode 1%, 2% 1%, 2% Thoriated Thoriated Alumina Diameter Thoriate...

Page 12 - CONNECTION DIAGRAMS; POWER SOURCE GAS VALVE, 1 PIECE POWER CABLE

CONNECTION DIAGRAMS POWER SOURCE GAS VALVE, 1 PIECE POWER CABLE TORCH GAS VALVE, 1 PIECE POWER CABLE TORCH GAS VALVE, 2 PIECE POWER CABLE Note: Refer to the manufacturer’s power source operating manual for recommended installation practice.

Page 13 - Order correct power cable adapter.; Quantity

HOOK-UP KITS — The hook-up kits contain the necessary hoses to connect between your gas regulator and power source. The hook-up kits are required for proper connection and are ordered separately. KP505 For LA-9, LA-17, LA-26 KP506 For LA-17V, LA-26V Quantity Part No. Description (Industry Ref.) 1 S1...

Page 16 - • World's Leader in Welding and Cutting Products •

• Sales and Service through Subsidiaries and Distributors Worldwide • Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com • World's Leader in Welding and Cutting Products •