LG BX286 - Manuals

English English Introduction 1. Control Panel 2. Remote Sensors 3. Focus Ring 4. Lens 5. Lens Cap 6. Adjustable feet 7. Ventilation (inlet) 8. Ventilation (outlet) Product Overview Air Flow 1 2 3 4 7 2 5 6 7 8 8

8 English Introduction Connection Ports 1. AC IN 2. RJ45 Connector 3. HDMI Connector 4. * RGB OUT Connector 5. RGB IN 1 Connector 6. RGB IN 2 Connector 7. S-VIDEO In Connector 8. VIDEO Connector 9. RS232C Service Port 10. AUDIO IN Jack 11. AUDIO OUT Connector 12. Kensington TM Lock LAN 2 3 4 5 8 1 6...

English 9 English Introduction Control Panel 1 POWER POWER LED Refer to the “Power On/Off the Pro- jector” section on pages 15~16. Indicate the projector’s status. 2 LAMP LED Indicate the projector’s lamp status. 3 TEMP LED Indicate the projector’s temperature status. 4 KEYSTONE Adjust the image to ...

0 English Introduction Remote Control 1 Infrared trans- mitter Sends signals to the projector. 2 LED LED Indicator. 3 Power Refer to the “Power On/Off the Pro- jector” section. (See pages 15~16) 4 OK Confirm your section of items in sub menu operation. 5 Four Directional Select Keys Use or or or to ...

English Introduction Remote Control Operating Range Point the remote control toward the projector (Infrared Re- mote Receiver) when pressing any button. Maximum operat- ing range for the remote control is about 23.0’ (7m) and 30° in front of the projector. 23.0’ (7m) Approx.15° 23.0’ (7m) Approx.15°...

English 3 English Installation LAN E62405SP R Connecting the Projector  Due to the differ- ence in applications for each country, some regions may have differ- ent accessories. Note 1............................................................................................Power cable (supplied) 2...

English Installation LAN E62405SP R  Due to the differ- ence in applications for each country, some regions may have dif- ferent accessories. Note 1............................................................................................Power cable (supplied) 2......................................

English English Installation Powering On the Projector 1. Ensure that the power cable and signal cable are securely connected. The POWER LED will turn orange. 2. Remove the lens cap.  3. Turn on the lamp by pressing “POWER” on the control panel or the remote control.  The POWER LED will fl ash gre...

6 English Installation Powering Off the Projector 1. Press the “POWER” to turn off the projector lamp, you will see a message as below on the on-screen display. 2. Press the “POWE R” again to confirm. 3. The cooling fan continues to operate for about 60 seconds for cooling cycle and the POWER LED wi...

English English Installation Warning Indicator  When the “TEMP” LED i ndicator lights red , it indicates the projector has overheated. The projector will automatically switch to eco mode. When the projector keep overheated for 60 seconds under eco mode, the projector will automatically shut itself ...

8 English Installation Adjusting the Projected Image Adjusting the Height of Projector Image The projector is equipped with adjustable feet to raise and lower the image to fill the screen. To raise/lower the image: 1. Use  to fine-tune the display angle .  You can raise the projector front up to 4...

English 9 English Installation 1.3'(0.4m) 26.2'(8.0m) 19.7'(6.0m) 14.8'(4.5m) 9.8'(3.0m) 4.9'(1.5m) 32.8'(10.0m) 31.4" (79.9cm) 117.9" (229.5cm) 235.8" (559.0cm) 353.8" (898.6cm) 471.7" (1,198.1cm) 628.9" (1,597.4cm) 786.1" (1,996.8cm) Lens Center H A Lens Center H : A = ...

0 English User Controls The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD, press “MENU” on the Remote Control or Con- trol Panel. 2. W...

English English User Controls IMAGE Image Mode There are many factory presets optimized for various types of im- ages. Use the or to select the item.  Presentation: For computer or notebook.  Bright: For bright room.  Movie: For home theater.  sRGB: For standard color.  User: Memorize user’s se...

English User Controls Saturation Adjust a video image from black and white to fully saturated color.  Press the to decrease the amount of color in the image.  Press the to increase the amount of color in the image. Tint Adjust the color balance of red and green.  Press the to increase the amount ...

English 3 English User Controls IMAGE | Advanced BrilliantColor TM Produces an expanded onscreen color spectrum that delivers en- hanced color saturation for bright, true-to-life images. Color Temp. The screen appears cooler at higher color temperatures and warmer at lower color temperatures. When y...

English User Controls Input Use this option to enable / disable input sources. Press to enter the sub menu and select which sources you require. Press “OK” to finalize the selection. The projector will not search for inputs that are not selected. IMAGE | Advanced | Input Source

English English User Controls SCREEN Aspect Ratio Use this function to choose your desired aspect ratio.  4:3: This format is for 4×3 input sources not enhanced for Wide- screen TV.  16:9: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV.  Native: This format d...

6 English User Controls How 3D Works * 3D technology takes advantage of the difference in angular vision between our two eyes to allow us to see images in three dimensions. How to watch 3D video 1. You can watch 3D videos through your PC or DVD player. For PC, use the 3D video player in a computer e...

English English User Controls Things to remember when watching 3D videos  Please watch 3D videos within the recommended angle and dis- tance from the screen. (Recommended Distance: 1.5m~5m.) - If you exceed the recommended angle or distance, you may not be able to experience the full 3D effect.  I...

8 English User Controls SETTING | Language Language Choose the multilingual OSD. Press into the sub menu and then use the or or or key to select your preferred language. Press “OK” to finalize the selection.

English 9 English User Controls SETTING Mounting  Front-Desktop The factory default setting. The image is projected straight on the screen.  Rear-Desktop When you select this function, the projector reverses the image so you can project behind a translucent screen.  Front-Ceiling When you select ...

30 English User Controls Menu Location Choose the menu location on the display screen. Mute  Choose “On” to mute the volume.  Choose “Off” to restore the volume. Alert Volume Allows you to set buzzer alert loudness (Off, Low, Medium or High) for power on/off, warning and command keys. Volume  Pre...

English 3 English User Controls SETTING | Network DHCP Address  On: Assign an IP address to the projector from an external DHCP server automatically.  Off: Assign an IP address manually. IP Address Select an IP address. Subnet Mask Select subnet mask number. Gateway Select the default gateway of t...

3 English User Controls SETTING | Signal Fine Sync Change the display data frequency to match the frequency of your computer’s graphic card. Use this function only if the image appears to flicker vertically. Total Dots Synchronize the signal timing of the display with the graphic card. If the image ...

English 33 English User Controls SETTING | Advanced Logo Use this function to set the desired startup screen. If changes are made they will take effect the next time the projector is powered on.  Off: No logo is displayed.  Normal: LG startup screen.  Capture Screen: Use memorize from “Screen Cap...

3 English User Controls OPTIONS Input Search  When “On” is selected, the projector will search for other signals if the current input signal is lost.  When “Off” is selected, the projector will only search a specified connection port. High Altitude When “On” is selected, the fans will spin faster....

English 3 English User Controls Closed Caption Select an appropriate closed captions option: CC1, CC2, CC3, and CC4. Factory Reset Press “ ” to reset all settings to its factory default, the warning message below appears.  “Closed Caption” option is available for NTSC only. Note

36 English User Controls OPTIONS | Lamp Settings Lamp Counter (Normal) Display the projection time of normal mode. Lamp Counter (ECO) Display the projection time of ECO mode. Lamp Mode  ECO: Choose “ECO” to dim the projector lamp which will lower power consumption and extend the lamp life.  Normal...

English 3 English User Controls Password  On: Choose “On” to use password verification when the turning on the projector.  Off: Choose “Off” to be able to switch on the projector without password verification. Change Password 1. Press “ ” to set the password. 2. The password has to be 4 digits.3. ...

38 English User Controls OPTIONS | Advanced Standby RGB Output Choose “On” or “Off” the RGB output function at projector standby status. Default is Off. Wake On Lan Choose “On” or “Off” the Network function at projector standby status. Default is Off. Direct Power On Choose “On” to activate Direct P...

English 39 English User Controls Model Name Display the model name. Input Source Display the input connector type. Resolution Display the current display resolution. Operating Hour Display the operation hours. Lamp Voltage Display the Lamp Voltage. INFORMATION  All functions in Information display ...

0 English User Controls Preface LAN module is a connection bridge between a projector and a district network. And via network, PC users can process remote control with projectors and received information from projectors. Definition of Terms Projector RS232C Command: A separated projector can execute...

English English User Controls Login Before login the web server, please get the IP address from projector OSD Menu. Key in the IP address projector acquired. A password is needed to login before can do any other work. • Select a user. Administrator is with high authority that can process more operat...

English User Controls Projector Control Panel This page shows many controls of your projector. And it will show current status of your projector. Note  Information on this page will be updated every time this page begins to show and 5 seconds after last but- ton clicked if a serial of actions perfo...

English 3 English User Controls Alert Setting Email will be sent whose body text informs the events which conditions occurred. Logout This page will appear for 5 seconds and then jump to login page Note 1. Information on this page will be updated every time this page begins to show. 2. Please submit...

English Appendices Problem: No image appears on screen  Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section.  Ensure the pins of connectors are not crooked or broken.  Check if the projection lamp has been securely installed....

English English Appendices 4. Verify the resolution setting is less than or equal to 1600 x 1200 resolution. 5. Select the “Change” under the “Monitor” tab . 6. Click on “Show all devices”. Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models”...

6 English Appendices Problem: Image is unstable or flickering  Adjust the “Total Dots” or “Fine Sync” to correct it. Refer to the “SETTING|signal” section for more information.  Change the monitor color setting from your computer.  Check and reconfigure the display mode of your graphic card to ma...

English English Appendices Message POWER-LED LAMP-LED TEMP-LED (Green) (Orange) (Red) (Red) Standby (Input power cable) Normal (Power on) Powering up (Warming up) Flashing Power off (Cooling-I: It can’t ac- cept any key at this status) Flashing Power off (Cooling-II: It can accept power key to turn ...

8 English Appendices Problem: Message Reminders  Over temperature - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used.  Replacing the lamp - the lamp is about to reach its maximum life-time. Prepare to replace it soon.  Fan fai...

English 9 English Appendices Replacing the lamp The projector will detect the lamp life itself. It will show you a warning message When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for ...

0 English Appendices Compatibility Mode Modes Resolution V-Sync (Hz) H-Sync (kHz) VGA 640 x 350 70 31.50 640 x 350 85 37.90 640 x 400 85 37.90 640 x 480 60 31.50 640 x 480 72 37.90 640 x 480 75 37.50 640 x 480 85 43.30 720 x 400 70 31.50 720 x 400 85 37.90 SVGA 800 x 600 56 35.20 800 x 600 60 37.90 ...

English Appendices Modes Resolution V-Sync (Hz) H-Sync (kHz) WXGA 1280 x 768 60 47.78 1280 x 768 75 60.29 1280 x 768 85 68.63 1280 x 720 60 44.80 1280 x 800 60 49.60 1440 x 900 60 55.90 1680 x 1050 60 65.30 1366 x 768 60 47.71 *1920 x 1080-RB 60 66.60  HDMI - Extended Wide timing  “*” Only support...

English 3 English Appendices Configurations of Terminals 1 TXD 2 RXD 3 GND Terminal : Analog RGB (Mini D-sub 15 pin) 1 Red (R/Cr) Input/R Output 9 5V / *** 2 Green (G/Y) Input/G Output 10 Ground (Ver. sync.) 3 Blue (B/Cb) Input/B Output 11 ICP download 4 *** 12 DDC data / *** 5 Ground (Horiz.sync.) ...

6 English Appendices Dimensions Screw holes for ceiling mountScrew M3Depth: 7.0 mm LENS CENTER 48.58 53.39 124.50 63.82 18.48 61.99 121.30 14.55 174.35 55.00 55.00 305.88 98.47 170.00 4.0° 241.60 131.53 72.35 86.05 137.94 62.88 14.30 Unit: mm

English English Appendices Regulation & Safety Notices This appendix lists the general notices of your projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide rea...

8 English Appendices Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle it. Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subjec...