Page 2 - TABLE OF CONTENTS; Topic; Page; Detailed Set-Up Guide; Program Mode; Features
2 TABLE OF CONTENTS Topic Page Inventory of Contents/Additional Equipment 3 About WWVB 3 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery installation 5 Program Mode Program Sequence and Default Settings 6 Function Keys 6 Setting the LCD Contrast 6 Setting the Time Zone 7 Daylight Saving Time Sett...
Page 3 - INVENTORY OF CONTENTS; Wall mounting base
3 INVENTORY OF CONTENTS 1. The WS-9075U weather station (Figure 1) 2. One TX6U remote temperature sensor (Figure 2) 3. Mounting hardware 4. Instruction manual and warranty card. *LCD (Liquid Crystal Display) ADDITIONAL EQUIPMENT (not included) 1. Three fresh AA 1.5V batteries for the indoor weather ...
Page 4 - Place the batteries into the; remote temperature sensor; first then into the; indoor weather station; DO NOT PRESS ANY BUTTONS FOR 15 MINUTES.; Important Notes on Set-up and Operation
4 QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries. 1. Have the indoor weather station and remote temperature sensor 3 to 5 feet apart. 2. Batteries should be out of both the indoor weather station and remote temperature sensor units for 10 minutes. 3. Pl...
Page 5 - the
5 DETAILED SET-UP GUIDE BATTERY INSTALLATION A. REMOTE TEMPERATURE SENSOR 1. Remove the mounting bracket. The bracket snaps on and off easily. 2. Remove the battery cover, by sliding the cover down. 3. Observing the correct polarity install 2 AA batteries. The batteries will fit tightly (to avoid st...
Page 6 - PROGRAM MODE; CHANNEL; PROGRAMMING SEQUENCE AND DEFAULT SETTINGS; SET
6 PROGRAM MODE Programming Note: If 15 seconds are allowed to pass, or the CHANNEL button is pressed during the programming mode, the unit will confirm/set the last information entered—the display will stop flashing and return to normal time-date readings. If you don’t leave the program mode during ...
Page 7 - TIME ZONE SETTING
7 III. TIME ZONE SETTING 1. The time zone will flash in the DATE LCD. 2. Press and release the MIN/MAX/+ or ALARM/- button to select your time zone. Note: It is possible to select any time zone from –12 GMT to +12 GMT (for example to see the time in another country). TIME ZONES GMT 0 Atlantic -4 EST...
Page 8 - TIME SETTING
8 V. RADIO-CONTROLLED TIME ON/OFF SETTING 1. “RCC” will appear in the DATE LCD and “ON” or “OFF” will flash in the TIME LCD. 2. Press and release the MIN/MAX/+ or the ALARM/- key to select radio-controlled time on or off. 3. Press and release the SET button to confirm and advance to the 12/24-hour t...
Page 10 - SETTING THE ANIMATION (FORECAST ICONS AND STARS); Press and release the
10 XI. SETTING THE ANIMATION (FORECAST ICONS AND STARS) 1. “ON” or “OFF” will flash in the TIME LCD. If “ON” the forecast icon and tendency arrows will flash in the FORECAST LCD and the stars will flash in the MOON PHASE LCD. If “OFF”, the forecast icon, tendency arrows, and stars will not flash. 2....
Page 11 - WEATHER FORECAST; Sunny; B. WEATHER TENDENCY ARROWS; VII; INDOOR TEMPERATURE, HUMIDITY, AND COMFORT LEVEL INDICATOR
11 I. WEATHER FORECAST The weather forecasting feature is estimated to be 75% accurate and is for the next 12 to 24 hours. The weather forecast is based solely upon the change of air pressure over time. The WS-9075U averages past air-pressure readings to provide an accurate forecast—creating a neces...
Page 13 - MOON PHASE
13 V. OUTDOOR CHANNEL RE-LEARN MODE In case the temperature data in a particular outdoor channel often shows “--.-“ due to low battery level or false reset of a transmitter, that transmitter can be set up again individually and the “lost” channel can be re-learned again by entering the channel re-le...
Page 14 - Viewing the Outdoor
14 VII. ADDING REMOTE TEMPERATURE SENSORS (OPTIONAL) The WS-9075U is able to receive signals from 3 different remote temperature sensors. The remote temperature sensor model(s) that you choose will come with their own set of instructions—follow these instructions for a complete guide to setting up. ...