La Crosse Technology WS-7395U - Manuals

Page 2 - TABLE OF CONTENTS; Topic Page; Program Mode; Features

2 TABLE OF CONTENTS Topic Page Inventory of Contents/Additional Equipment 3 About WWVB 3 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery installation 5 Program Mode Program Sequence and Default Settings 6 Function Keys 6 Setting the LCD Contrast 6-7 Setting the Time Zone 7 Daylight Saving Time Se...

Page 3 - INVENTORY OF CONTENTS; Mounting hardware; Figure 1

3 INVENTORY OF CONTENTS 1. The WS-7395U weather station (Figure 1). 2. One TX8U remote temperature/humidity sensor (Figure 2). 3. One TX15U wind speed sensor (Figure 3). 4. Mounting hardware 5. Instruction manual and warranty card. ADDITIONAL EQUIPMENT (not included) 1. Three fresh AA 1.5V batteries...

Page 4 - Place the batteries into the; remote temperature/humidity sensor; first then into the; indoor weather station; DO NOT PRESS ANY BUTTONS FOR 15 MINUTES.; Important Notes on Set-up and Operation; Direct rainfall will not harm the wind speed sensor.

4 QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries. 1. Have the indoor weather station, remote temperature/humidity sensor and wind speed sensor 3 to 5 feet apart. 2. Insert the telephone plug (RJ-11) from the wind speed sensor into the receptacle on the ...

Page 5 - Remove the mounting bracket and humidity hood.; INDOOR WEATHER STATION; Observe the correct polarity, and install 3 AA batteries.

5 DETAILED SET-UP GUIDE BATTERY INSTALLATION The first step to powering up the weather station is to insert the connector (RJ11) at the end of the wire attached to the wind speed sensor to the remote temperature/humidity sensor. Please ensure when doing this that the connector is inserted with the p...

Page 6 - SET

6 PROGRAM MODE Programming Note: If 30 seconds are allowed to pass, or the WIND/SNZ button is pressed during the programming mode, the unit will confirm/set the last information entered—the display will stop flashing and return to normal time-date readings. If you don’t leave the program mode during...

Page 7 - TIME ZONE SETTING

7 3. Press and release the ALM/+ button to select the level you desire. 4. Press and release the SET button to confirm and advance to the Time Zone setting. IV. TIME ZONE SETTING 1. Press and hold the SET button for 5 seconds. 2. “LCD” will show in the TIME LCD and the number setting will flash. 3. ...

Page 10 - SETTING THE FORECAST SENSITIVITY

10 XII. SETTING THE FORECAST SENSITIVITY Note: The forecast sensitivity can be adjusted to allow for areas that have a higher or lower sensitivity to changing air pressure (for example coastal areas have more pressure change than areas such as southern Arizona). The numbers correspond to the amount ...

Page 13 - WIND SPEED, WIND CHILL, MINIMUM AND MAXIMUM VALUES

13 V. MOON PHASE There are 12 moon phases shown on the indoor weather station; the black portion signifies the portion of the moon visible in the sky. Thus, when the moon icon is all black, it is a full moon. VI. VIEWING THE CURRENT, MAXIMUM AND MINUMUM DEW POINT To view the current dew point: 1. Pr...

Page 14 - BEAUFORT SCALE WIND SPEED

14 To view the current wind chill: 1. Press and release the WIND/SNZ button. 2. The wind chill value will display at the bottom of the WIND SPEED LCD. To view the maximum and minimum wind/wind chill values: 1. Press and hold the WIND/SNZ button for 3 seconds. 2. The WIND SPEED LCD will now show the ...

Page 16 - TIME ALARM

16 High waves (6 meters), rolling seas, dense foam, Blowing spray reduces visibility. 10 55-63 mph 89-102 kph 48-55 knots Whole Gale or Storm Trees are broken or uprooted, building damage is considerable. Large waves (6-9 meters), overhanging crests, sea becomes white with foam, heavy rolling, reduc...

Page 18 - THE REMOTE WIND SPEED SENSOR; The remote wind speed sensor can be mounted two ways:; MOUNTING WITH SCREWS; Place the mounting bracket over the desired location.; MOUNTING WITH NYLON STRAPS

18 II. THE REMOTE WIND SPEED SENSOR The remote wind speed sensor can be mounted two ways: • With the use of screws • Using nylon straps A. MOUNTING WITH SCREWS 1) Unlock the mounting bracket from the remote wind speed sensor leaving the wire going through the bracket. 2) Place the mounting bracket o...

Page 20 - Weather data checking interval:; WARRANTY INFORMATION

20 displayed if outside range Indoor relative humidity measuring range: 1% to 99% with 1% resolution (“- -” displayed if outside this range Outdoor relative humidity measuring range: 1% to 99% with 1% resolution (“- - “ displayed if outside this range Wind speed measuring range: 0 to 111.8 mph (0 to...

Page 21 - La Crosse Technology; FCC DISCLAIMER; UNDESIRED OPERATION.

21 performance of repairs or alterations by someone other than an authorized La Crosse Technology, Ltd authorized service center; (6) units used for other than home use (7) applications and uses that this product was not intended or (8) the products inability to receive a signal due to any source of...