La Crosse Technology WS-1510-IT - Manuals

Page 2 - HISTORY key

5 Sockets for wind sensor Note: When putting the Weather Center into operation, it is important to perform in close proximity (e.g. on a table) a complete wiring and set-up of the system. This step is important to test all components for correct function before placing and mounting them at their fin...

Page 3 - LCD SCREEN; LCD CONTRAST SETTING

9 SET key • Press and hold to enter manual setting modes: LCD contrast, Manual time setting, 12/24 hour time display, Calendar setting, ºF/ ºC temperature unit, Wind speed unit, Rainfall unit, Pressure unit, Relative pressure reference setting, Weather tendency threshold setting, Storm warning thres...

Page 5 - Default alarm values:; HIGH AND LOW OUTDOOR HUMIDITY ALARM SETTING; Weather data; Sunny; Cloudy with sunny; Rainy

17 The Weather Center can be set to alert when a specific weather condition is reached. The following Weather Alarm settings can be adjusted in the ALARM setting mode. • High outdoor temperature alarm • Low outdoor temperature alarm • High outdoor humidity alarm • Low outdoor humidity alarm • High w...

Page 6 - Wind chill in; RAINFALL MEASUREMENT; To view the weather history:; VIEWING THE MAXIMUM/ MINIMUM WEATHER DATA; Min outdoor temperature with the date and time of recording

21 Center will be more accurate compared to use in areas where the weather is stagnant most of the time (for example mostly sunny). If the Weather Center is moved to another location significantly higher or lower than its initial standing point (for example from the ground floor to the upper floors ...

Page 7 - RESET THE MAXIMUM AND MINIMUM WEATHER DATA; Press the ALARM key to return to normal display mode.

25 2. Max outdoor temperature with the date and time of recording 3. Min dew point temperature with the date and time of recording 4. Max dew point temperature with the date and time of recording 5. Min outdoor humidity with the date and time of recording 6. Max outdoor humidity with the date and ti...

Page 8 - The History data record will be clear after the battery change.; Setting up; above) otherwise transmission problems may occur.; Setting up; Using extension cables will shorten battery life.; To wall mount

29 To reset the rainfall reading, press the + key once when the Rainfall value and "Reset" icon is shown. Then the total rainfall amount will be reset to 0, and the time updated to current time. Note: After power up, the time and date and total rainfall are displayed as "- - -". Afte...

Page 9 - CARE AND MAINTENANCE:

33 First, check that the wind-cups and the wind-vane can rotate freely before fixing the unit. For correct and accurate readings, it is important to mount the sensor so that the front (marked E) is pointing in East-West direction. The wind sensor should now be mounted using the screw or cable tie pr...

Page 10 - Mounting Sensors; slot or hole designed to prevent pinching; –Program Set Up Menu

37 Crosse Technology, Ltd product to a La Crosse Technology, Ltd authorized service center. La Crosse Technology, Ltd will pay ground return shipping charges to the owner of the product to a USA address only. Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with...