La Crosse Technology TX4U - Manuals

5 C. WEATHER CENTER 1. Remove the battery cover. To do this, place a solid object in the space provided at the lower-central position of the battery cover (the cover has white writing on it) then push up and pull out on the battery cover. 2. Observe the correct polarity, and install three C batterie...

7 4. Press the SET button to confirm, and to advance to the Time setting mode. IV. TIME SETTING Note: The default time, after battery installation is “12:00.” The Weather Center will begin to keep track of time after this. 1. Press the SET button three times to enter the Time setting mode. 2. The ho...

10 XI. MANUALLY SETTING THE RELATIVE AIR PRESSURE 1. Press the SET button thirteen times to enter the Manual Setting of the Relative Air Pressure mode. 2. The air pressure digits in LCD 4 will flash. Use the CH/+ button to set the appropriate Relative Air Pressure (check local weather service). 3. P...

12 every moon phase and its beginning dates until the year 2020 (wrapping around to 1998). Note: The Moon Phase features allow for the discovery of dates of specific moon phases. Hypothetically, if the date of the next full moon were desired (and the current moon phase was not a full moon), simply p...

14 , 1 Comfort Level Indicator Sunny— indicates that the weather is expected to improve (not that the weather will be sunny). Sun with Clouds— indicates that the weather is expected to be fair (not that the weather will be sunny with clouds). Clouds with Rain— indicates that the weather is expected ...

18 VI. RESETTING RAINFALL INFORMATION A. RAINFALL QUANTITY TOTALS Resetting the Rainfall Quantity Totals will clear the numeric data held under “TOTAL,” “1h,” and “24h,” resetting all to 0.00 (appearing in LCD 5). From any selected normal display mode: 1. Press and hold the RAIN button for 3 seconds...

20 A. SET-UP OF MULTIPLE SENSORS Note: The first sensor signal that the Weather Center receives is automatically assigned as the “boxed #1.” The 2 nd to be received is the “boxed #2,” and the 3 rd is the “boxed #3.” 1. It is necessary to remove the batteries from all units currently in operation. 2....

21 I. THE TX4U—REMOTE THERMO-HYGRO SENSOR The TX4U—Remote Thermo-Hygro Sensor can be mounted in two ways: • with the use of screws or, • using the adhesive tape. A. MOUNTING WITH THE SCREWS 1. Remove the mounting bracket/receptor from the packaging. 2. Place the mounting bracket over the desired mou...

22 II. THE TX5U—RAINFALL SENSOR The Rainfall Sensor can be mounted in two ways: • simply placing it in a desired location, or • mounting it to surface with the provided screws. Ensure that the Rainfall Sensor is completely horizontal and stable. 1. Rotate the rainfall collector separating it from th...

24 MAINTENANCE AND CARE • Extreme temperatures, vibrations, and shock should be avoided to prevent damage to the units. • Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents—they may mark and damage the displays and casings. • Do not submerge in water. • Immediat...

26 Outdoor humidity: Every 10 seconds for the first 12 minutes, then every 5 minutes. Rain quantity: Every 10 seconds for the first 12 minutes, then every 5 minutes. Sensor reading update Outdoor temperature: Every 1 minute. Outdoor humidity: Every 1 minute. Rain quantity update (Rain Gauge): Update...

27 WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to th...

28 This warranty gives you specific legal rights. You may also have other rights specific to your State. Some States do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you. For warranty work, technical support, or information...