Knoll GSZ44 - Manuals - manualsarea.com

Page 2 - Important Safety Instructions:; WARNING; to cause birth defects or other reproductive harm.

2 Important Safety Instructions: 1) Read these instructions. 2) Keep these instructions. 3) Read all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s in...

Page 3 - FCC Warning; Reorient or relocate the receiving antenna.; Canada; constitute a risk of electrical shock to persons.

3 FCC Warning Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, ...

Page 5 - GSZ44 placement

5 Unpacking: The carton and packing materials used in shipping your new amplifier were specially designed to protect it from the shock and vibration of shipping. We suggest that you save the carton and packing materials to use if you move, or if the unit ever needs to be shipped back to us for any r...

Page 7 - Keypad Connection; We recommend the T568A wiring method, which is shown below.

7 Keypad Connection The GSZ44 outputs are be controlled by the MR40 keypad and a Knoll RB8 remote control. Only one MR40 keypad can be used in a zone. Note: MR40 keypads are not designed for outdoor use, high humidity, high temperatures or any extremes. The MR40 contains an almost all brand infrared...

Page 8 - MR40 Functions; OFF

8 Note: MR40 keypads do not require any programming. Infrared connections On the rear of the GSZ44 there are four infrared pass though ports. Each of the 1 through 4 corresponds to the keypad port next to them. For example IR port #3 is the infrared output for keypads connected to KEYPAD #3. The inf...

Page 9 - Troubleshooting

9 To turn off the zone either push the keypad button labeled off or the off button on the RB8 remote control. To turn on the zone on either press the source button or the off button on the remote or keypad. If you press the OFF button the zone will go back to the source selected when it was last shu...

Page 10 - Limited Warranty

10 Problem Solutions Amplifier won’t turn on Master power switch turned off (No power light LED). Turn on Master Power Switch. Amplifier turns on, but no audio Input plugs not connected to proper jack or are loose. from one or more channels Check input connections. No audio from one or more Speakers...

Page 11 - Made in Canada; Connect in fr ar ed to IR 54 or IR5 5 co nn ectio n blo ck.; Do no t conn ec t; with ou t a 220R r esisto r in seri es or the e mitter

11 DISCLAIMER OF UNSTATED WARRANTIES THE WARRANTY PRINTED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PURCHASE. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MER-CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. THERE ARE NO WARR...