Knoll HD102 - Manual - manualsarea.com

Page 2 - FCC Warning; Canada; Trademarks

2 FCC Warning Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, ...

Page 5 - Introduction; Product specifications; for; Connector Panel

5 Introduction Congratulations and thank you for your excellent choice of a superior digital image projection device. Your new Knoll HD102 projector is specifically designed for home cinema applications. The HD102 sets a high standard using the latest DLP™ technology and new DCDi Plus video processi...

Page 6 - Computer In; input on the

6 12-volt DC output The 3.5mm mini-jack trigger provides a 12-volt DC output. It provides a constant output while the projector is on. It has numerous uses. For example, if you connect your projection screen to the 12-volt DC output with the cable that came with your screen, when you turn on the pro...

Page 7 - Video connections; being the highest and

7 Video connections The first step for connecting video is deciding what type of output connector you want to connect to the projector. If there is more than one output, select the one with the highest quality. The best quality ranking, with 1 being the highest and 3 being the lowest, is: 1. compone...

Page 8 - Required computer connections; connector on the projector.; Power; : Always use the power cord shipped with; Optional computer connections; Audio In; connectors on the projector.

8 Video Device Video Compatibility If Your Device Connector is Attached to Adapter or Labeled Connector on projector For Setup Instructions see Comments HDTV (High Definition TV) 1035i, 1080i, 720p Component 480i, 480p, 576i, 576p DVI Component Video Computer In (DVI) Video 1 (component RCA) DVI con...

Page 9 - Remove the lens cap. Toggle the; Get help on page 15.; Computer; button on the projector’s keypad.; Refer to your laptop’s documentation to learn your; Try pressing the keypad; Auto Image

9 Displaying a computer source image Remove the lens cap. Toggle the Power switch on the side of the projector to the On position. The LED flashes green and the fans start to run. When the lamp comes on, the start up screen displays and the LED is steady green. It can take a minute for the image to ...

Page 10 - Skip this section if you did not connect a USB mouse cable

10 Press the top Keystone button to reduce the upper part of the image, and press the bottom Keystone button to reduce the lower part. Adjust the Contrast or Brightness in the Picture menu. See page 21 for help with these menu adjustments. Using the projector with Windows 98 for the first time The f...

Page 11 - Connecting a video device; Video 2

11 Connecting a video device You can connect video devices such as VCRs, DVD players, camcorders, digital cameras, video game consoles, HDTV receivers, and TV tuners to the projector. There is also an audio input via the red and white A/V connectors. You can connect the audio directly to the project...

Page 13 - Displaying video

13 Displaying video Remove the lens cap. Toggle the Power switch on the side of the projector to the On position. The LED flashes green and the fans start to run. When the lamp comes on, the start-up screen is displayed and the LED is steady green. It can take a minute for the image to achieve full ...

Page 14 - Shutting down the projector; Screen Save; button to place the projector in the Off state while it is running.; : Once the projector has been toggled off,; Troubleshooting your setup

14 Adjust the Contrast, Brightness, Color, Tint, or Aspect Ratio in the Picture menu. See page 22 for help with the menus and these adjustments. For Aspect Ratio, keep in mind that DVD players must be configured for 16:9 in order to view the highest quality image. For more information regarding Aspe...

Page 15 - Table 1: LED behavior and meaning; Meaning

15 Table 1: LED behavior and meaning LED color/behavior Meaning Solid Green The power switch has been toggled on and the software has initialized or the projector has been powered off via the remote. Blinking Green The power switch has been toggled on and the software is initializing, or the project...

Page 19 - Using the audio

19 Using the remote control The remote uses two (2) provided AAA batteries. They are easily installed by sliding the cover off the remote’s back, aligning the + and - ends of the batteries, sliding them into place, and then replacing the cover. To operate, point the remote at the projection screen o...

Page 22 - Advanced menu

22 Picture menu To adjust the following settings, highlight the setting, press Select , use the up and down arrows to adjust the values, then press Select to confirm the changes. Keystone : adjusts the image vertically and makes a squarer image. You can also adjust keystone from the keypad. Contrast...

Page 25 - packing list

25 Service : To use these features, highlight them and press Select . Factory Reset : restores all settings to their default. Lamp Reset : resets the lamp hours used counter in the About menu to zero. Do this only after changing the lamp. Service Code : only used by authorized service personnel. Abo...

Page 26 - Cleaning the Lamp Housing Screens

26 WARNING : To avoid burns, allow the projector to cool for at least 30 minutes before you replace the lamp . Do not drop the lamp housing or touch the glass bulb! The glass may shatter and cause injury . Be extremely careful when removing the lamp housing. In the unlikely event that the bulb ruptu...

Page 27 - Table 3; to determine a; Red LED Behavior

27 Appendix 1: HD102 Projection Throw Distance (16:9 Aspect Screen) Screen Diagonal 92" 103" 106" 110" 122.5" 146.75" Minimum Distance 139.5" 156.1" 160.7" 166.7" 185.7" 222.5" Maximum Distance 167.2" 187" 192.5" 200" 222.7" 266.8&#...

28 LIMITED WARRANTY Knoll Systems, Inc. (“Knoll”) warrants that each HD102 (“the Product”) sold hereunder will conform to and function in accordance with the written specifications of Knoll. Said limited warranty shall apply only to the first person or entity that purchases the Product for personal ...

Knoll HD102 - Manual

Table of Contents:

Summary

Other Knoll Models