Knoll MA1250 - Manual
Knoll MA1250 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – In most cases, one of the following suggestions should help you; 8) A push button is used to turn the power off and on.; Warning: If you suspect that the grounding system in your; 9) A LED is used to show when the apparatus is powered on.; WARNING; : This product contains chemicals, including lead, known to the
- Page 3 – The MA1250 amplifier does not contain any user serviceable parts; The most important consideration when installing the
- Page 4 – Amps
Warranty
MA1250 Amplifier
Knoll Systems warrants MA1250 amplifiers sold in the USA and Canada by
authorized Knoll dealers to be free of defects in materials and workmanship. This
warranty extends for three full years from the date of purchase by the original
consumer. Any products returned to Knoll Systems and found to be defective by
Knoll Systems within the warranty period will be repaired or replaced at Knoll
Systems decision, at no charge. Knoll Systems will not be responsible for the
actual cost of installation or removal of the product, nor for any incidental or
consequential damages. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation may not apply to
you. This warranty gives you specific legal rights. You may have additional legal
rights that vary from state to state.
12 Channel Amplifier
Installation Instructions v1.2
Warning
: To be installed and/or used in accordance with appropriate
electrical codes and regulations.
Description:
The MA1250 is a member of the long line of Knoll multi-
channel amplifiers. Designed primarily for the custom install industry, it
is used to power speakers with different or similar sources in multiple
rooms. With 12 channels rated at 50 watts per channels at 8 ohms, the
MA1250 packs some serious punch. Each channel has a gain control.
The MA1250 can be turned on and off via the front panel power switch
or via the 12 VDC trigger. MA1250 channels 3-12 can be linked to
channel 1-2 individually using the link switches. MA1250 amplifiers
designed to meet the amplifier needs of custom installed systems
where high-quality sound is a specific requirement.
Specifications:
Inputs
12 Gold RCA jacks with adjustable gain
Input impedance
50k ohms
Outputs
detachable plug
Output power
50 watts RMS per channel (8 ohms)
Peak output power
100 watts per channel (8 ohms)
Ideal impedance
4 - 8 ohms
Frequency response
10 Hz - 40 kHz +/- 1dB (1w)
S/N ratio
over 105 dB A weighted (50 watts)
THD distortion
less than 0.1% 20 Hz to 20 kHz
IMD distortion
less than 0.01% 60 Hz 7 kHz 4:1 (SMPTE)
Trigger control
12 VDC 35mA on 3.5mm mono jack
Dimensions
17" x 3.5" x 11.5" (432 x 89 x 292mm)
Fan Noise
quiet 26 dBA
Power
750 watts at 117 VAC or 230 VAC
Weight
21 lbs (9.5 kg)
Key Features:
1. Size efficiency.
The MA1250 consists of a total of 12 power
amplifiers in one 3-1/2” high enclosure. Each power amplifier
channel can deliver 50 watts RMS into an 8-ohm load.
2. Automatic protection circuitry.
Each MA1250 channel is
individually and fully protected against low impedance,
overheating, overloading, overvoltage and undervoltage. The
protection circuitry automatically restores the amplifier channel
as soon as its parameter returns to the safe operating area.
3. Individual input gain adjustment.
Each channel features
an input gain adjustment pot to adjust each channel for gain
and speaker sensitivity variations. The gain adjustments are on
the rear of the MA1250 so installers normally set the gain.
Note:
Specifications subject to change without notice.
4. External power on/off.
The MA1250 can be turned off and
on by external controllers. To activate external power on, apply
a 12 VDC current to the trigger jack (the MA1250 power switch
is in the off position for external power control).
5. Stackable 17" chassis.
6. Link Feature.
Certain installations require that some or all of
the stereo channels play the same content. Instead of using Y
cords, "link" cascades any or all of channels 2-6 to channel 1
(l/r).
Knoll Systems
145 Tyee Drive Point Roberts, WA 98281
12140 Horseshoe Way, Richmond, BC V7A 4V5
Tel: (604) 272 4555, fax (604) 272 5595
Made in Canada
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Important Safety Instructions: Hum and noise In most cases, one of the following suggestions should help you solve a hum noise in your system. Please try these steps in the order shown, proceeding from one step to the next if the prior suggestion does not eliminate the problem. 1) Read these instruc...
Knoll Systems service information Installation Installing the MA1250 should be relatively easy. With a bit of planning, the MA1250 will give trouble free service for years. The MA1250 amplifier does not contain any user serviceable parts inside. If you suspect a problem that may require servicing, c...
10. Connect the AC power into an outlet that supplies at least six amps (750 watts) dedicated to each MA1250. Caution: Never listen to sound that is distorted. If distorted sound is heard, turn the volume down immediately or speaker and/or amplifier damage could occur that is not covered by the warr...
