Jura Z5 - Manuals - manualsarea.com

Page 5 - Description of the machine; b) One Touch Cappuccino nozzle* short spout; Graphics display

Description of the machine 1. Drip tray2. a) Drip grate b) Cup platform 3. Coffee grounds tray and container4. a) One Touch Cappuccino nozzle* long spout b) One Touch Cappuccino nozzle* short spout 5. Water tank with handle and level indicator6. Water tank cover7. Cover for bean tank and coffee powd...

Page 6 - Contents

6 Contents 1. Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7 1.1 Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7 1.2 Precautions . . . . . . . . . . . . . . . . ....

Page 7 - The coffee machine may only be used by instructed persons.; Preparing the IMPRESSA Z5

7 Introduction Thank you for purchasing the IMPRESSA Z5. To ensure perfectfunctioning of your IMPRESSA, carefully read this operatingmanual and keep it for future reference. Should you need more information or if you encounter particularproblems not specified in these operating instructions in suffi...

Page 10 - Adjusting your machine to the water hardness

10 CONFIRMED √ PRESS MAINTENANCE Maintenance key (C) lights up. Place a cup each under the height-adjustable coffee spout (12)and the cappuccino nozzle (4) and press the maintenance key (C). SYSTEM FILLS The system now fills up automatically. While it is doing so, themaintenance key flashes. (A litt...

Page 12 - Changing the filter

12 INSERT FILTER PRESS BUTTON Remove the water tank from the IMPRESSA. Empty out anyremaining water. Fold up the cartridge holder (Fig.6). Attach theextension piece to the top of the CLARIS plus filter cartridge.Now insert the filter cartridge in the water tank, applying gentlepressure (Fig. 6). Clo...

Page 15 - Cappuccino cleaning cycle; not

15 CAPPU RINSE Place a sufficiently large receptacle (ca. 0.5 litres) under the cap-puccino nozzle (4). Turn the selector switch (1, Fig. 9) to the steam range (c, Fig. 9). Press the maintenance key (C) to start the cappuccino rinsing cycle. CAPPUCCINO RINSING COFFEE READY You can also trigger a cap...

Page 17 - Brewing coffee using pre-ground coffee powder; Never; Switching the IMPRESSA off

17 You can change the amount of water set while the machineis dispensing hot water. To do so, turn the Rotary Switch (B)until the display indicates the required amount (ML). Theamount of water can be selected in increments of 5 ML. The amounts given in ML are approximate values and mayvary from the ...

Page 19 - Setting the amount of hot water

19 When the machine has dispensed as much milk as you wanted,briefly press the key once more. CONFIRMED √ The amount of milk to be dispensed is now programmed. ENOUGH ? PRESS BUTTON When you have made as much coffee as you wanted, brieflypress the key once more. CONFIRMED √ The amount of coffee to b...

Page 21 - Programming the coffee strength

21 COFFEE READY Press the Rotary Switch (B) until you hear an acoustic signal. FILTER NO or YES Turn the Rotary Switch (B) until the following message is dis-played: TEMPERATURE Press the Rotary Switch (B) to start programming. TEMPERATURE COFFEE READY Then press a product key of your choice. 1 ESPR...

Page 24 - Setting the time

24 Now press the Rotary Switch (B) to leave the programmingmode. COFFEE READY Save energy: No Selecting this level puts the IMPRESSA in constant stand-bymode.This setting allows you to make coffee or frothed milk withouthaving to wait for the machine to heat up. This setting is useful if you make a ...

Page 32 - Information about decalcify

32 After another 10 products, the display will change. Please run thecleaning cycle immediately (see Chapter 17). CLEAN NOW CLEAN (flashing) 16.11 Information about decalcify Lime scale builds up in the IMPRESSA as a result of normal use.The degree of calcification depends on the hardness of the wat...

Page 35 - Tips for perfect coffee; Grinding degree

35 You will hear an acoustic signal. TRAY / GROUNDS EMPTY Empty the drip tray (1) and the coffee grounds tray with thecontainer (3). TRAY MISSING Place the empty, clean drip tray (1) and the coffee grounds traywith the container (3) back into the IMPRESSA. COFFEE READY You can also trigger a decalci...

Page 37 - Legal information

37 22. Legal information These operating instructions contain all the information requiredfor using, operating and maintaining the machine properly. Knowledge of and compliance with the specifications contained inthese operating instructions is required for using the machine safelyas well as for ope...