Jura X95 - Manuals - manualsarea.com

Page 2 - please follow the instructions shown.; English

Legend: DISPLAY: serves as information. DISPLAY: please follow the instructions shown. = Note = Important = Tip Jura Impressa X90/X95 English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Page 6 - Table of contents

6 Table of contents 1. Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7 2. Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7 2.1 Warnings . . . . . ....

Page 8 - FILL SYSTEM / PRESS STEAM

8 If using acidic decalcifying agents be sure to immediately re-move any splashes and drops from delicate surfaces, especiallynatural stone and wooden surfaces, or take corresponding pre-cautions. 3. Check before use 3.1 Checking mains voltage The machine is set for the correct voltage before leavin...

Page 9 - PRESS KEY / POWDER QUANTITY

9 Place a container under the coffee-spout (15) and press rinsingkey . UNIT RINSING COFFEE READY 4.2 Cup illumination The cup illumination puts your coffee in a good light, making it atreat for the eyes. When you switch on the machine or press any key, the cup illumi-nation is activated for 3 minute...

Page 10 - Use of Claris filter cartridges; Replacing of filter; RINSE FILTER / PRESS STEAM; Drawing off coffee

10 7. Use of Claris filter cartridges Under proper implementation of Claris filter cartridges,decalcifying of the machine becomes unnecessary. Forfurther information, please read the brochure “Claris. Toughto calcium deposits, gentle to your coffee machine“. 7.1 Placing filter Pull up cartridge moun...

Page 11 - Drawing off powder coffee; FILL POWDER; Drawing off hot water; CLOSE TAP; Drawing off steam; COFFEE READY

11 UNIT RINSING COFFEE READY Put 1, respectively 2 cups under the coffee-spout and press therequired key. The pre-brew system (I.P.B.A.S. © ) moistens the coffee powder, briefly interrupts the flow and then starts the realbrewing process. You can interrupt the flow of coffee at any time by simplypre...

Page 12 - Drawing off cappuccino and hot milk with

12 Place a cup under the steam/frothing nozzle (20) and immersethe frothing aid in the milk to be frothed or the liquid to beheated. Press steam portion draw-off key . STEAM PORTION You can stop the draw-off operation at any time by pressing thesteam draw-off key . COFFEE READY 11. Connecting the Pr...

Page 13 - Programming powder quantity; POWDER; Programming coffee temperature; II

13 13. Programming Before leaving our factory, the machine is adjusted to enable youto obtain coffee without any additional programming. In order toadapt the result to your personal taste, various settings can be pro-grammed individually. The programming keys are located behindthe front cover (3). T...

Page 14 - OPEN TAP; Programming Filter

14 By pressing the button, you can select the next phase, or press the button in order to leave the programming. 13.4 Programming steam portion STEAM PORTION Press key . PORTION /....20 SEC. By pressing key or you can programme time in seconds (drawing off time of 3 – 250 sec.) Press key . STEAM POR...

Page 16 - Care and maintenance; FILL WATER; Empty grounds container; EMPTY GROUNDS; Empty drip tray; EMPTY TRAY; Removing foreign objects

16 13.14 Program key By using key you can set back the following settings (powder quantity, coffee temperature, water quantity, steam portion, teaportion) to their original standard settings. COFFEE READY Press key until you can hear an acoustic signal. If a mistake occurs while programming one of t...

Page 19 - Tips for a perfect coffee; Height adjustable coffee-spout

19 FILL WATER Place a container under the pivoting nozzle (20). OPEN TAP PRESS CALC UNIT DECALCIFIYING / PLEASE WAIT Place a container under the height-adjustable tea-spout (22). PRESS CALC UNIT DECALCIFIYING / PLEASE WAIT CLOSE TAP UNIT DECALCIFIYING / PLEASE WAIT Inside the machine the water is co...

Page 22 - Legal information

22 Problem Cause Action Not enough froth while – Frothing nozzle blocked – Clean frothing nozzle frothing up milk – Clean Auto-Cappuccino – Clean Profi Auto-Cappuccino/Caffè Latte – as described in chapter 11.2 If the above mentioned problems and/or messages still persist, please contact your dealer...