JL Audio SLPK-CAN-SPYDER1 - Manuals

JL Audio SLPK-CAN-SPYDER1 – Manual in PDF format online.

Manuals:

Manual

Manual JL Audio SLPK-CAN-SPYDER1

Summary

Page 3 - Before drilling, always make sure that you are not; Position foam strips as shown on each pod.

Continued on Next Page SLPK-CAN-SPYDER1_INSTR_SKU# 011312 s t e P 1 5 Install the 3/8-16 x 1-1/4” Hex Head Bolt through the included Split Lock Washer, the 1-1/4” Fender Washer and the hole drilled in steP 14 into the enclosure, tighten this fastener down. Once this fastener is tight, the front air ...

Page 5 - Continued on Next Page; steP; C o n G R a t u l a t I o n s !; You have completed the installation for this model!

Continued on Next Page SLPK-CAN-SPYDER1_INSTR_SKU# 011312 s t e P 3 0 Again, secure all cables along the full run to ensure that they cannot get tangled in any moving parts or the exhaust system. The signal and speaker wires will join with the power cables that came up the side of the motorcycle and...

Page 6 - I n C l u d e d H a R d W a R e; ) 3” x 3” Wax Square; s P e C I F I C a t I o n s; Ohms; P o W e R R e C o m m e n d a t I o n

SLPK-CAN-SPYDER1_INSTR_SKU# 011312 Page 6• JL Audio, Inc 2009 All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL...