JL Audio 300/2 - Manual
JL Audio 300/2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PLANNING YOUR INSTALLATION; Cooling Efficiency Considerations:; PROTECT YOUR HEARING!; not; JL AUDIO
- Page 3 – POWER CONNECTIONS; “Ground”; AWG is the minimum; I M P O RTA N T; PRODUCT DESCRIPTION; This step is not optional!
- Page 4 – INPUT SECTION; FUSE REQUIREMENTS
- Page 5 – CROSSOVER CONTROLS
- Page 7 – Target AC Voltage; not recommended; “FILTER FREQ” AMP FILTER; Detent
- Page 8 – “Remote”
- Page 9 – GENERAL SPECIFICATIONS:; Recommended Fuse Value:
- Page 11 – If you need service on your JL AUDIO product:; JL AUDIO with a valid return authorization number.; International Warranties:; by that countr y’s distributor and not by JL Audio, Inc.; Absolute Symmetry
Thank you for purchasing a JL Audio amplifier for
your automotive sound system.
Your amplifier has been designed and manufactured to exacting
standards in order to ensure years of musical enjoyment in your
vehicle. For maximum performance and extended warranty
coverage, we highly recommend that you have your new amplifier
installed by an authorized JL Audio dealer. Your authorized
dealer has the training, expertise and installation equipment to
ensure optimum performance from this product. Should you
decide to install the amplifier yourself, please take the time
to read this manual thoroughly so as to familiarize yourself
with its installation requirements and setup procedures.
If you have any questions regarding the instructions in this
manual or any aspect of your amplifier’s operation, please contact
your authorized JL Audio dealer for assistance. If you need further
assistance, please call the JL Audio Technical Support Department at
(954) 443-1100 during business hours (Eastern Time Zone).
JL AUDIO
300/2
two-channel full-range amplifier
o w n e r ’ s m a n u a l
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
PLANNING YOUR INSTALLATION It is impor tant that you take the time to read this manual and that you plan out your installation carefully. The following are some considerations that you must take into account when planning your installation. Cooling Efficiency Considerations: Your JL Audio amplifier ...
POWER CONNECTIONS Before installing the amplifier, disconnect the negative (ground) wire from the vehicle's batter y. This will prevent accidental damage to the system, the vehicle and your body during installation. The 300/2's “+12 VDC” and “Ground” connections are designed to accept 8 - 4 AWG powe...
INPUT SECTION The 300/2 has one input section, which contains a pair of RCA-type input jacks, an “Input Voltage” switch and an “Input Sens.” rotar y control. 1) Input Voltage Range: A wide range of signal input voltages can be accommodated by the 300/2's input section (200mV – 8V). This wide range i...
