JL Audio 500/1 - Manual
JL Audio 500/1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Absolute Power... Every Time.
www.jlaudio.com
Ken Pohlmann, Mobile Entertainment magazine’s electronics expert, recently reviewed
our 500/1 monoblock subwoofer amplifier and found a lot to like...
Introducing the
JL AUDIO
500/1
monoblock subwoofer amplifier
On our sophisticated Active
Crossover and Advanced Bass
Control Sections...
“I’ve reviewed plenty of amplifiers
in my time, but I’ve never seen a sub
amp provide such a sonic tool set...”
“It offers such a plethora of controls
that you can dial out many unwanted
artifacts to get exactly the sound you
are looking for.”
“By tweaking the 500/1’s bass boost
and preamp-output section, I was able
to exactly dial in the perfect transition
between the subs and the (mains).”
“It’s cleverly designed to do almost
anything you need to perfect your
low end.”
On JL Audio’s R.I.P.S. (Regulated,
Intelligent Power Supply) System...
“Supply voltage can range from 11 to
14.5 volts, the range not significantly
affecting power output.”
“...the amplifier automatically matches
the speakers, allowing more flexibility
in speaker selection and wiring.”
On the 500/1’s sonic performance...
“If you’re more interested in lots of
bass with lots of sound quality... this is
the niche where the 500/1 is aimed.”
“With the 500/1, the massiveness
(of the bassline) was fully intact, but
the articulation of each individual
instrument was also audible.”
“That combination of high power,
loud levels, and clean detail is
extremely rare, and I felt that the
500/1 was superb in that respect.”
“...the bottom octave was awesome,
with good power levels throughout
and excellent transient response on
Jimmy Chamberlain’s kick-drum and
floor toms..”
Power vs. Impedance
2
Ω
3
Ω
4
Ω
With R.I.P.S. @ 14.4V
500W
500W
500W
With R.I.P.S. @ 12V
500W
500W
500W
Without R.I.P.S. @ 14.4V
500W
400W
300W
Without R.I.P.S. @ 12V
350W
280W
210W
Benefits of R.I.P.S.
Power vs. Impedance
2
Ω
4
Ω
Measured Power @ 14.4V
550.0W
552.2W
Measured Power @ 12V
545.0W
552.0W
Power Measured @ 100 Hz and 1% THD plus noise
Mobile Entertainment’s test results for the 500/1
All quotations used with premission.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
