JL Audio A2150 - Manual
JL Audio A2150 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – FUSE REQUIREMENTS; PRODUCT DESCRIPTION; JL AUDIO
- Page 4 – FILTER CONTROLS; INPUT SECTION
- Page 5 – Advanced Rollback Thermal protection; BASS BOOST CONTROLS
- Page 6 – SERVICING YOUR JL AUDIO AMPLIFIER; If your amplifier fails or malfunctions, please; JL Audio Technical Support; If the car’s supply voltage drops below 10; Power
- Page 7 – “FILTER FREQ” AMP FILTER; General Specifications:; Recommended Fuse Value:; Necessary Equipment
- Page 11 – (do not send product for repair to this address); International Warranties:; by that country’s distributor and not by JL Audio, Inc.
Thank you for purchasing a JL Audio amplifier for
your automotive sound system.
Your amplifier has been designed and manufactured to exacting
standards in order to ensure years of musical enjoyment in your vehicle.
For maximum performance and extended warranty
coverage, we highly recommend that you have your new amplifier
installed by an authorized JL Audio dealer. Your authorized
dealer has the training, expertise and installation equipment to ensure
optimum performance from this product. Should you
decide to install the amplifier yourself, please take the time
to read this manual thoroughly so as to familiarize yourself
with its installation requirements and setup procedures.
If you have any questions regarding the instructions in this
manual or any aspect of your amplifier’s operation, please contact your
authorized JL Audio dealer for assistance. If you need further assistance,
please call the JL Audio Technical Support Department
at (954) 443-1100 during business hours.
OWNER’S MANUAL
A
2150
two-channel full-range amplifier
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
The A2150’s “ +12VDC ” and “ Ground ” connections are designed to accept 8 AWG - 4 AWG power wire. 8 AWG is a minimum power wire size for this amplifier. If you are installing the A2150 with other amplifiers and wish to use a single main power wire, use 4 AWG or larger main power wire (depending on ...
FILTER CONTROLS Most speakers are not designed to reproduce the full range of frequencies audible by the human ear. For this reason, most speaker systems are comprised of multiple speakers, each dedicated to reproducing a specific frequency range. Filters are used to select which frequency range is ...
When a pair of channels are bridged, they will deliver 150W x 1 into a 4 ohm load or 90W x 1 into an 8 ohm load. Operating a pair of bridged channels into a load lower than 4 ohms is not recommended. Because a bridged pair of channels requires that both channels receive input, you need to connect bo...
