JL Audio A6450 - Manual
JL Audio A6450 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Ground; AWG is a minimum power wire size; FUSE REQUIREMENTS; PRODUCT DESCRIPTION; JL AUDIO
- Page 4 – INPUT SECTION
- Page 5 – BASS BOOST CONTROLS
- Page 6 – Advanced Rollback Thermal protection
- Page 7 – Crossover Setup for Bi-Amplified System
- Page 8 – General Specifications:; Recommended Fuse Value:; “FILTER FREQ” AMP FILTER; Necessary Equipment
- Page 11 – (do not send product for repair to this address); International Warranties:; by that country’s distributor and not by JL Audio, Inc.
Thank you for purchasing a JL Audio amplifier for
your automotive sound system.
Your amplifier has been designed and manufactured to exacting
standards in order to ensure years of musical enjoyment in your vehicle.
For maximum performance and extended warranty
coverage, we highly recommend that you have your new amplifier
installed by an authorized JL Audio dealer. Your authorized
dealer has the training, expertise and installation equipment to ensure
optimum performance from this product. Should you
decide to install the amplifier yourself, please take the time
to read this manual thoroughly so as to familiarize yourself
with its installation requirements and setup procedures.
If you have any questions regarding the instructions in this
manual or any aspect of your amplifier’s operation, please contact your
authorized JL Audio dealer for assistance. If you need further assistance,
please call the JL Audio Technical Support Department
at (954) 443-1100 during business hours.
OWNER’S MANUAL
A
6450
six-channel system amplifier
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
The A6450’s “ +12 VDC ” and “ Ground ” connections are designed to accept 4 AWG power wire. 4 AWG is a minimum power wire size for this amplifier. If you are installing the A6450 with other amplifiers and wish to use a single main power wire, use 2 AWG or 1/0 AWG main power wire (depending on the ov...
INPUT SENSITIVITY CONTROLS Once the appropriate “ Input Voltage ” range has been selected, the controls labeled “ Input Sens. ” located in each “ Channel Controls ” section can be used to match the source unit’s output voltage to the input stage of each pair of amplifier channels for maximum clean o...
SPEAKER OUTPUTS The A6450’s speaker outputs are designed to accept 16 AWG - 8 AWG wire. Each pair of the A6450’s channels are designed to deliver power into speaker loads equal to or greater than 2 ohms when using a “stereo” configuration and speaker loads equal to or greater than 4 ohms when using ...
