JL Audio SB-N-ARMDA/10W6v2 - Manuals

➔ ➔ ➔ ➔ ➔ STEP 7: With a 14mm socket, remove the dri- ver’s side third row seat belt. STEP 11: With a second person, carefully remove the lower por tion of the driver’s side rear panel. When removing the bottom panel,Do not let the guides that are found at the top ofthe bottom panel scratch the uppe...

➔ ➔ STEP 13(B): You can use different cutting tools. Here we used a cutting wheel. STEP 15: Back inside the SUV, Look into the area that the Stealthbox is going to reside. There is a metal lip to the left. On this lip there is an exposed hole. Measure 3/4”from the middle of this hole down and mark. ...

➔ ➔ ➔ ➔ ➔ STEP 18: Place the supplied slotted mounting bar into mounting area. The bar will go behind the open-ing. The slot needs to be facing up. STEP 22: Place the supplied socket cup set screw into the Stealtbox. Leaving about 1-1/2” exposed. Cont. From Previous Page Continued on Next Page ➔ ➔ V...