JL Audio SB-N-ARMDA/10W6v2 - Manual
JL Audio SB-N-ARMDA/10W6v2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – P a g e 2
- Page 3 – P a g e 3
- Page 4 – P a g e 4
- Page 5 – Sealed; P a g e 5; Front Location Driver Size:; From; Difficulty Of Installation:
➔
➔
➔
➔
Stealthbox
®
I N S T A L L A T I O N G U I D E
S B - N - A R M D A / 1 0 W 6 v 2 , J L A U D I O , I n c 2 0 0 5
S h e e t S K U # 0 1 1 1 9 3 R e v i s i o n 5 / 2 6 / 2 0 0 5
P a g e 1
for the
SB-N-ARMAD/10W6v2
(2004-Up Nissan Armada, without the power
lift gate)
This Stealthbox is a product which
requires professional installation skills and
tools.
Please read this installation guide thor-
oughly before beginning the project. It
will guide you step by step through the
installation. Several of the steps in this
process may require two people to
accomplish.
It is absolutely vital that the enclosure
be properly mounted to the vehicle
according to these instructions. Failure
to mount the enclosure properly pres-
ents two problems: 1) The sub-bass
performance will suffer due to the
movement of the enclosure caused by
the force exer ted by the woofer(s) and
2) A loose enclosure presents a serious
safety hazard in the event of a collision
or sudden deceleration.
Please enjoy your JL Audio Stealthbox
responsibly.
STEP 1:
Clear out any contents from the
cargo area.
STEP 2:
Fold down the third row seating.
STEP 3:
Remove the driver’s side rear stor-
age door and remove the jack.
STEP 4:
Remove the sill plate, floor storage
door and cargo area carpeting.
STEP 5:
There are a pair of tie-down cleats
that need to be removed from the driver’s
side.
Pull the metal loop up and with a flat blade
screw driver pop up the plastic clip.
STEP 6:
Lower the metal loop and feed the
plastic clip through the metal loop.
With a 10mm socket, remove the bolts from
each cleat.
START
HERE
Continued on Next Page
➔
w w w . j l a u d i o . c o m
➔
➔
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
➔ ➔ ➔ ➔ ➔ STEP 7: With a 14mm socket, remove the dri- ver’s side third row seat belt. STEP 11: With a second person, carefully remove the lower por tion of the driver’s side rear panel. When removing the bottom panel,Do not let the guides that are found at the top ofthe bottom panel scratch the uppe...
➔ ➔ STEP 13(B): You can use different cutting tools. Here we used a cutting wheel. STEP 15: Back inside the SUV, Look into the area that the Stealthbox is going to reside. There is a metal lip to the left. On this lip there is an exposed hole. Measure 3/4”from the middle of this hole down and mark. ...
➔ ➔ ➔ ➔ ➔ STEP 18: Place the supplied slotted mounting bar into mounting area. The bar will go behind the open-ing. The slot needs to be facing up. STEP 22: Place the supplied socket cup set screw into the Stealtbox. Leaving about 1-1/2” exposed. Cont. From Previous Page Continued on Next Page ➔ ➔ V...
