JL Audio A4300 - Manuals

The A4300’s “ +12VDC ” and “ Ground ” connections are designed to accept 8 AWG - 4 AWG power wire. 8 AWG is a minimum power wire size for this amplifier. If you are installing the A4300 with other amplifiers and wish to use a single main power wire, use 4 AWG or larger main power wire (depending on ...

Do not increase any “Input Sens.” setting for any channel(s) of any amplifier in the system beyond the maximum level established during the procedure outlined in Appendix A (page 14). Doing so will result in audible distortion and possible speaker damage. FILTER CONTROLS Most speakers are not design...

SPEAKER OUTPUTS The A4300’s speaker outputs are designed to accept 16 AWG - 8 AWG wire. Each pair of the A4300’s channels are designed to deliver power into speaker loads equal to or greater than 2 ohms per channel when using a “stereo” configuration and speaker loads equal to or greater than 4 ohms...