JAI CV-M10 - Manuals - manualsarea.com

Page 2 - DECLARATION OF CONFORMITY; AS DEFINED BY THE COUNCIL DIRECTIVE

CV-M10BX/CV-M10RS DECLARATION OF CONFORMITY AS DEFINED BY THE COUNCIL DIRECTIVE 89/336/EEC EMC (ELECTROMAGNETIC COMPATIBILITY) WE HEREWITH DECLARE THAT THIS PRODUCT COMPLIES WITH THE FOLLOWING PROVISIONS APPLYING TO IT. EN-50081-1 EN-50082-1

Page 3 - Table of Contents

CV-M10BX/CV-M10RS Table of Contents 1. General .............................................................................................................................................................................. 12. Standard Composition ........................................................

Page 4 - Standard Composition; CV-M10 is available in the following versions:

CV-M10BX/CV-M10RS - 1 - 1. General The CV-M10 is a compact monochrome progressive scan camera designed for automated imaging applications. The 1/2"CCD with square pixels offers a superb image quality. The high-speed shutter function and asynchronous random triggermode allows the camera to captur...

Page 5 - Locations and Functions; Tripod mount plate to place the camera on tripod.

- 2 - CV-M10BX/CV-M10RS 4. Locations and Functions 9 3 5 6 4 8 7 1 2 CV-M10BX 1. Lens mount of C-mount type. *1) 2. Interline-transfer CCD sensor with on-chip micro lenses. 3. Video output 1. VS 1.0 Vp-p. *2) 4. Video output 2. VS 1.0 Vp-p. (Only in 2 :1 interlaced mode.) *2) 5. SW1 switch on the re...

Page 7 - Functions and Operation; Normal shutter

- 4 - CV-M10BX/CV-M10RS 6. Functions and Operation Apart from the standard continuous operation, the CV-M10 features two external asynchronous trigger modes, Edge Pre-select and Pulse Width Control mode. These 2 external trigger modes can operate with either H reset or H non-reset. In EdgePre-select...

Page 9 - SW1-4 on BX rear to OFF for random trigger. For RS select trigger mode; Short for Pulse Width Control

- 6 - CV-M10BX/CV-M10RS The resulting video signal will start to be read out after the trigger rising edge. The WEN pulse indicates the start of validvideo signal. Refer to timing charts for details.A new trigger pulse must not be applied before the video read out has been finished. To use this mode...

Page 10 - Timing diagram for Pulse Width Control

CV-M10BX/CV-M10RS - 7 - 6.5. Timing diagram for Pulse Width Control 1HD~625HD EIA:247HD CCIR:291HD EIA:494HD CCIR:582HD HD RESET 7HD 14HD TRIGINT HDXSUBXSG WEN VIDEO 1 2:1 interlace in field accumulation VIDEO 2 VIDEO 1 Non interlace in frame accumulation Pulse width control mode (H Reset) exposure ...

Page 11 - OFF ON; Fixed; OF

- 8 - CV-M10BX/CV-M10RS OFF ON 12 3 4 56 7 8 SCANNING TRIGGER Interl. < > N on Interl . Random trig < > No rmal SHUTTER 1 < > 0.45 GAMMA < < < shutter Hi gh speed shutter < < > < > < < > > > < < > < > > > < > > &g...

Page 17 - Internal adjustments on BX

- 14 - CV-M10BX/CV-M10RS 9. Internal adjustments on BX For CV-M10BX there are internal potentiometers for adjusting the two video outputs. Do not touch these adjustments unlessyou are familiar with video camera adjusting.The potentiometers are found on the PK8206A board in CV-M10BX.For CV-M10RS the ...

Page 20 - External Appearance and Dimensions

CV-M10BX/CV-M10RS - 17 - 11. External Appearance and Dimensions 50 5 (1.97) (0.2) 26 (1.02) 4-M3 80 (3.15) 12.7 (0.5) 40 (1.57) 50 (1.97) C-mount 26 (1.02) 6 6 U1/4-20 4-M3 CV-M10BX CV-M10RS 34 13 30 14 30 Unit : mm (inch)

Page 22 - Blemishes

CV-M10BX/CV-M10RS - 19 - 13. Appendix 13.1. Precautions Personnel not trained in dealing with similar electronic devices should not service this camera. The camera contains components sensitive to electrostatic discharge. The handling of these devices should follow therequirements of electrostatic s...