Intel PC 8153 - Manuals - manualsarea.com

Disclaimers This manual has been carefully checked and believed to contain accurate information. ACNODES Co. assumes no responsibility for any infringements of patents or any third party ’s rights, and any liability arising from such use. ACNODES does not warrant or assume any legal liability or res...

Page 4 - Safety Approvals; CE Marking; F C C C o mp l i an c e; doesn’t connect with the receiver.

Safety Approvals CE Marking FCC Class A F C C C o mp l i an c e This equipment has been tested in compliance with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are meant to provide reasonable protection against harmful interference in a residential insta...

Page 5 - Safety Precautions

1 Safety Precautions Before getting started, please read the following important safety precautions. 1. The PC 8153 Series does not come equipped with an operating system. An operating system must be loaded first before installing any software into the computer. 2. Be sure to ground yourself to prev...

Page 6 - Trademarks Acknowledgments; Intel

Before handling a board or integrated circuit, touch an unpainted portion of the system unit chassis for a few seconds. This will help to discharge any static electricity on your body. When handling boards and components, wear a wrist- grounding strap, available from most electronic component stores...

Page 7 - Table of Contents; C h a p t e r 1 Introduction

3 Table of Contents Disclaimers ........................................................................................................... ii Safety Approvals ................................................................................................. iii Safety Precautions ......................

Page 8 - A p p e n d i x Pow er Supply Specification; vii

4.1 System ........................................................................................... 59 4.2 Touch Screen ................................................................................. 60 4.2.1 Specification ...........................................................................

Page 9 - MEMO; viii

Page 11 - C h a p t e r 1; . Chapter 1 includes the following sections:; General Description

PC 8153 User’ Introduction 1 s Manual C h a p t e r 1 Introduction This chapter contains general information and detailed specifications of the PC 8153 . Chapter 1 includes the following sections: General Description System Specification Dimensions Front View & I/O Outlets Package List

Page 12 - General Description; Pow erful computing: Intel® CoreTM2 Duo processor

PC8153 User’ 2 Introduction s Manual 1.1 General Description The PC 8153 is a 15” Industrial panel PC which features Intel ® Core ™ 2 Duo processor and Intel ® Q965 chipset to provide powerful computing performance. This panel PC also offers the expansion ability with two PCI slots. It adopts built-...

Page 13 - Introduction; System Specifications; NOTE It doesn’t support the processor with FSB 1333 MHz,

Introduction 3 PC 8153 User’s Manual 1.2 System Specifications 1.2.1 Main CPU Board CPU Socket LGA775 for Intel ® Core TM 2 Duo/Core TM Solo Processor with FSB 533/800/1066 MHz NOTE It doesn’t support the processor with FSB 1333 MHz, and it is not recommended to use Quad-Core CPU. System Chipset ® I...

Page 14 - Ethernet; First port with i82566DM Gigabit Ethernet PHY, Second port; Audio; HD Audio for two channels output; Storage; Four SATA-300 interface; Expansion Slot; Two 32-bit PCI Master slots; System Specification; Disk Drive Housing

4 Introduction PC8153 User’s Manual Ethernet First port with i82566DM Gigabit Ethernet PHY, Second port with RTL8111B for Gigabit/Fast Ethernet Audio HD Audio for two channels output MIC-In, Line-Out Storage Four SATA-300 interface Box-Header One 26-pin for shared LPT/FDD(optional) Expansion Slot Tw...

Page 17 - Front View

Introduction 7 PC 8153 User’s Manual 1.4 Front View and I/O Outlets 1.4.1 Front View Please refer to the following illustration for features and controls of the PC 8153 front bezel. No Function 1 SEL+ 2 SEL- 3 Backlight ON/OFF

Page 22 - H a r d ware Installation; C h a p t e r 2; Installing the CPU and DRAM

PC 8153 User’s Manual 1 2 H a r d ware Installation C h a p t e r 2 Hardware Installation The PC 8153 is convenient for your various hardware configurations in flexible ways, such as CPU (Central Processing Unit), HDD (Hard Disk Drive), Memory Module (DRAM), CD-ROM, Add-On card, and more. The chapte...

Page 23 - Hardware Installation; Step 1; Unscrew screws to remove the rear chassis.; Step 2; Remove the riser card fix kit.

PC 8153 User’s Manual Hardware Installation 13 Step 1 Unscrew screws to remove the rear chassis. Step 2 Remove the riser card fix kit.

Page 24 - Step 3; Install the CPU and DDR DRAM in the PC 8153.; D R AM

PC 8153 User’s Manual 1 4 H a r d ware Installation Step 3 Install the CPU and DDR DRAM in the PC 8153. D R AM C P U

Page 25 - Installing the the Hard Disk Drive; Note The hardware limitation is the 2.5 ” HDD and 3.5” HDD

PC 8153 User’s Manual Hardware Installation 15 2.2 Installing the the Hard Disk Drive The PC 8153 offers a convenient drive bay module for users to install HDD. The system offers users two 3.5” Hard Disk Drives for installation. If you want to install one or two 2.5” HDD, the PC 8153 also provides t...

Page 26 - Step 4; The installation is completed.; HDD; Change HDD bracket from 3.5

PC 8153 User’s Manual 1 6 H a r d ware Installation Step 4 The installation is completed. Installing Dual 3.5 ” HDD If installing the dual 3.5” HDD, please follow the steps: Step 1 Change HDD bracket from 3.5 ” to dual 3.5 ” .

Page 27 - Fix the Hard Disk to the HDD bracket to complete the

PC 8153 User’s Manual 17 Hardware Installation Step 2 Fix the Hard Disk to the HDD bracket to complete the installation.

Page 28 - Installing fan w hen using dual 3.5; Screw the fan to the right side of cover.

PC 8153 User’s Manual 1 8 H a r d ware Installation Note When installing Dual 3.5 ” HDD, users must install a fan to decrease system heat. Installation step as following: Installing fan w hen using dual 3.5 ” HDD Step 1 Screw the fan to the right side of cover. (1-1)

Page 29 - Connect power cable of fan to 3 pin fan connector (CN3) in

PC 8153 User’s Manual Hardware Installation 19 ( 1 - 2 ) (1-3) Step 2 Connect power cable of fan to 3 pin fan connector (CN3) in motherboard.

Page 30 - Set the 2.5” HDD in the HDD bracket kit.; Install the HDD in the PC 8153.

PC 8153 User’s Manual 2 0 H a r d ware Installation If installing the 2.5” HDD, please follow the steps: Step 1 Set the 2.5” HDD in the HDD bracket kit. Step 2 Install the HDD in the PC 8153.

Page 32 - Remove the rear chassis.; Setp 2

PC 8153 User’s Manual 2 2 H a r d ware Installation 2.4 Add-on Card Installation The PC 8153 provides a riser card for PCI slots expansion. The riser card assembly can accommodate both half-size expansion cards. To install the riser card, refer to the following figure and instructions below: Step 1 ...

Page 33 - Insert the add-on card in the socket firmly until it is

PC 8153 User’s Manual Hardware Installation 23 Step 4 Insert the add-on card in the socket firmly until it is completely seated.

Page 34 - Serial Port Interface; The

PC 8153 User’s Manual 2 4 H a r d ware Installation 2.5 Serial Port Interface The PC 8153 has three onboard serial ports, COM1, COM2, and COM3. COM1 is RS-232(default)/422/485 Port Connector while COM2 and COM3 are RS-232 Port Connectors. The connector, COM1, COM2, COM3 are DB-9 connector, and the f...

Page 35 - NOTE It doesn’t support display in LCD and DVI-D

PC 8153 User’s Manual Hardware Installation 25 19 Ground 20 NC Pin Signal Pin Signal 21 NC 22 Ground 23 TXC+ 24 TXC- C1 CRT-RED C2 CRT-GREEN C3 CRT-BLUE C4 CRT-HSYNC C5 VGAGND C5 1 8 C1 C2 9 16 17 24 C3 C4 C5 NOTE It doesn’t support display in LCD and DVI-D simultaneously. DVI-D is only available af...

Page 37 - Mountings Way – Panel; Pan el

PC 8153 User’s Manual Hardware Installation 27 2.8 Mountings Way – Panel There is one application option for the PC 8153, Panel mounting. Pan el – Moun t K i t A ss embl ey The PC 8153 is designed for panel mount application. To mount the PC 8153 , the standard set of mounting kit (included in the s...

Page 38 - Phoenix-Award BIOS Utility; C h a p t e r 3

PC 8153 User’s Manual 28 Phoenix-Award BIOS Utility C h a p t e r 3 Phoenix-Award BIOS Utility The Phoenix-Award BIOS provides users with a built-in Setup program to modify basic system configuration. All configured parameters are stored in a battery-backed-up RAM (CMOS RAM) to save the Setup inform...

Page 39 - Main Menu

PC 8153 User’s Manual Phoenix-Award BIOS Utility 29 3.2 Control Keys Up arrow Move cursor to the previous item Dow n arrow Move cursor to the next item Left arrow Move cursor to the item on the left hand Right arrow Move to the item in the right hand Esc key Main Menu -- Quit and delete changes into...

Page 41 - Standard CMOS Setup Menu; Date; Time

PC 8153 User’s Manual Phoenix-Award BIOS Utility 31 3.5 Standard CMOS Setup Menu The Standard CMOS Setup Menu displays basic information about your system. Use arrow keys to highlight each item, and use <PgUp> or <PgDn> key to select the value you want in each item. Date The date format ...

Page 42 - IDE Primary Master/Primary Slave; Select the display adapter type for your system.; Halt On

PC 8153 User’s Manual 32 Phoenix-Award BIOS Utility IDE Primary Master/Primary Slave These items identify the types of each IDE channel installed in the computer. There are 45 predefined types (Type 1 to Type 45) and 2 user’s definable types (Type User) for Enhanced IDE BIOS. Press <PgUp>/<...

Page 43 - Advanced BIOS Features

PC 8153 User’s Manual Phoenix-Award BIOS Utility 33 Press <Esc> to return to the Main Menu page. 3.6 Advanced BIOS Features This section allows you to configure and improve your system, to set up some system features according to your preference.

Page 44 - CPU Feature

PC 8153 User’s Manual 34 Phoenix-Award BIOS Utility CPU Feature Scroll to this item and press <Enter> to view the CPU Feature sub menu. Hard Disk Boot Priority Scroll to this item and press <Enter> to view the sub menu to decide the disk boot priority.

Page 45 - Virus Warning; NOTE This function is only available with DOS and other; Quick Power On Self Test

PC 8153 User’s Manual Phoenix-Award BIOS Utility 35 Virus Warning This option flashes on the screen. During and after the system boot up, any attempt to write to the boot sector or partition table of the hard disk drive will halt the system with the following message. You can run an anti-virus progr...

Page 46 - Boot Other Device; Enabled”; Boot Up Floppy Seek; Set the the Num Lock status when the system is powered on.; Gate A20 Option; The default value is; Typematic Rate Setting; “Disabled”

PC 8153 User’s Manual 36 Phoenix-Award BIOS Utility First/Second/Third Boot Device These items let you select the 1st, 2nd, and 3rd devices that the system will search for during its boot-up sequence. The wide range of selection includes Floppy, LS120, ZIP100, HDD0~3, SCSI, and CDROM. Boot Other Dev...

Page 47 - Security Option; “Setup”; NOTE To disable the security, select PASSWORD

PC 8153 User’s Manual Phoenix-Award BIOS Utility 37 Typematic Rate (Chars/Sec) This option refers to character numbers typed per second by the keyboard. The default value is “6” . 6 characters per second 6 8 characters per second 8 10 characters per second 10 12 characters per second 12 15 character...

Page 48 - APIC Mode

PC 8153 User’s Manual 38 Phoenix-Award BIOS Utility APIC Mode Use this item to enable or disable APIC (Advanced Programmable Interrupt Controller) mode that provides symmetric multi- processing (SMP) for systems. MPS Version Control For OS This item specifies the version of the Multiprocessor Specif...

Page 49 - Advanced Chipset Features; System BIOS Cacheable

PC 8153 User’s Manual Phoenix-Award BIOS Utility 39 3.7 Advanced Chipset Features This section contains completely optimized chipset ’s features on the board that you are strongly recommended to leave all items on this page at their default values unless you are very familiar with the technical spec...

Page 50 - PCI Express Root Port Func; Use this item to choose the primary display card.; On-Chip Frame Buffer Size; Use this item to set the VGA frame buffer size.; DVMT Mode

PC 8153 User’s Manual 40 Phoenix-Award BIOS Utility PCI Express Root Port Func Scroll to this item and press <Enter> to view the sub menu to decide the PCI Express Port. Press <Esc> to return to the Advanced Chipset Featurs page. *** VGA Setting *** PEG/Onchip VGA Control Use this item t...

Page 51 - Boot Display; This item is for Intel define ADD card only.; Integrated Peripherals

PC 8153 User’s Manual Phoenix-Award BIOS Utility 41 Boot Display This item is for Intel define ADD card only. Press <Esc> to return to the Main Menu page. 3.8 Integrated Peripherals This section allows you to configure your SuperIO Device, IDE Function and Onboard Device.

Page 52 - IDE HDD Block Mode; “Enabled”

PC 8153 User’s Manual 42 Phoenix-Award BIOS Utility On-Chip IDE Device Scroll to this item and press <Enter> to view the sub menu On-Chip IDE Device. IDE HDD Block Mode Block mode is also called block transfer, multiple commands, or multiple sector read/write. If your IDE hard drive supports b...

Page 53 - IDE Master/Slave UDMA; NOTE ICH8DO supports AHCI under Microsoft; LEGACY Mode Support

PC 8153 User’s Manual Phoenix-Award BIOS Utility 43 Master/Slave PIO items on the menu. IDE Master/Slave PIO The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of the four IDE devices that the onboard IDE interface supports. Modes 0 to 4 provide successively incr...

Page 54 - Super IO Device; The 3BC

PC 8153 User’s Manual 44 Phoenix-Award BIOS Utility Super IO Device Scroll to this item and press <Enter> to view the sub menu Super IO Device. Onboard FDC Controller Select Enabled if your system has a floppy disk controller (FDC) installed on the system board and you wish to use it. If you i...

Page 55 - Parallel Port Mode

PC 8153 User’s Manual Phoenix-Award BIOS Utility 45 Parallel Port Mode Select an operating mode for the onboard parallel (printer) port. Select Normal unless your hardware and software require one of the other modes offered in this field. The options available are EPP1.9, ECP, SPP, ECPEPP1.7, EPP1.7...

Page 56 - Power Management Setup

PC 8153 User’s Manual 46 Phoenix-Award BIOS Utility 3.9 Power Management Setup The Power Management Setup allows you to save energy of your system effectively. It will shut down the hard disk and turn OFF video display after a period of inactivity.

Page 57 - ACPI Function; Enabled; ACPI Suspend Type

PC 8153 User’s Manual Phoenix-Award BIOS Utility 47 ACPI Function This item allows you to enable/disable the Advanced Configuration and Power Management (ACPI). The function is always “ Enabled ”. ACPI Suspend Type This item specifies the power saving modes for ACPI function. If your operating syste...

Page 59 - Suspend Mode; HDD Pow er Dow n; Resume by Alarm

PC 8153 User’s Manual Phoenix-Award BIOS Utility 49 connect the fax/modem to the board Wake On Modem connector for working this feature. Suspend Mode After the selected period of system inactivity (1 minute to 1 hour), all devices except the CPU shut off. The default value is “Disabled” . System wil...

Page 61 - Reset Configuration Data; “Manual”; IRQ Resources; When resources are controlled manually, assign each system

PC 8153 User’s Manual Phoenix-Award BIOS Utility 51 3.10 PnP/PCI Configuration Setup This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed the CPU itself uses when communicating with ...

Page 62 - PCI/VGA Palette Snoop

PC 8153 User’s Manual 52 Phoenix-Award BIOS Utility interrupt to one of the following types in accordance with the type of devices using the interrupt: 1. Legacy ISA Devices compliant with the original PC AT bus specification, requiring a specific interrupt (such as IRQ4 for serial port 1). 2. PCI/I...

Page 63 - PC Health Status; Shutdow n Temperature; Show you the current system temperature.; Current CPU Temperature

PC 8153 User’s Manual Phoenix-Award BIOS Utility 53 3.11 PC Health Status This section supports hardware monitoring that lets you monitor those parameters for critical voltages, temperatures and fan speed of the board. Shutdow n Temperature It helps you set the maximum temperature they system can re...

Page 64 - CPU Clock Ratio; Use this item to select the CPU’s frequency.; Auto Detect PCI Clk

PC 8153 User’s Manual 54 Phoenix-Award BIOS Utility 3.12 Frequency/Voltage Control This section is to control the CPU frequency and Supply Voltage, DIMM OverVoltage and AGP voltage. CPU Clock Ratio Use this item to select the CPU’s frequency. Auto Detect PCI Clk The enabled item can automatically di...

Page 65 - Load Optimized Defaults

PC 8153 User’s Manual Phoenix-Award BIOS Utility 55 3.13 Load Optimized Defaults This option allows you to load the default values to your system configuration. These default settings are optimal and enable all high performance features. To load SETUP defaults value to CMOS SRAM, enter “Y”. If not, ...

Page 66 - Supervisor password:; can enter and change the options of the

PC 8153 User’s Manual 56 Phoenix-Award BIOS Utility 3.14 Set Supervisor/User Password You can set either supervisor or user password, or both of then. The differences between are: 1. Supervisor password: can enter and change the options of the setup menus. 2. User password: just can enter but do not...

Page 68 - Exit Without Saving

PC 8153 User’s Manual 58 Phoenix-Award BIOS Utility 3.16 Exit Without Saving Select this option to exit the Setup utility without saving the changes you have made in this session. Typing “Y” will quit the Setup utility without saving the modifications. Typing “N” will return you to Setup utility.

Page 70 - Driver Installation; C h a p t e r 4; Here is the path for the system driver:

PC 8153 User’s Manual 60 Driver Installation C h a p t e r 4 Driver Installation 4.1 System PC 8153 supports Windows 2000/XP/Vista. To facilitate the installation of the system driver, please carefully read the instructions in this chapter before start installing. 1. Here is the path for the system ...

Page 75 - Using “INSTALL.EXE” Utility to Install Pen Mount Software

PC 8153 User’s Manual Driver Installation 65 4.2.3 Driver Installation - DOS Using “INSTALL.EXE” Utility to Install Pen Mount Software Driver 1. Insert Driver CD and select the Panel series\P1153- 841\Driver\Step5 - Touch\Driver\DOS\Install.exe 2. Press ENTER key to install the drivers to drive C or...

Page 76 - Do Calibration; The message pops out to ask if you select the video mode number.; Initializing the Pen mount Driver

PC 8153 User’s Manual 66 Driver Installation C:\PEN MOUNT\PMDETECT -N5 -N9 Do Calibration 1. To adjust the touch screen mapping properly to display screen, use PM.BAT (C:\PEN MOUNT\PM) to do calibration. Choose “1” DO CALIBRATION (adjust screen mapping). 2. The message pops out to ask if you select ...

Page 78 - Power Supply Specification; A p p e n d i x; Electrical Requirements; OUTPUT ELECTRICAL REQUIREMENTS; when all load take off.

PC 8153 User’s Manual 68 Power Supply Specification A p p e n d i x Power Supply Specification Power Supply FSP250-50GUB (250W, AC100~240V Input) 1. Electrical Requirements OUTPUT ELECTRICAL REQUIREMENTS The subject power supply will meet all electrical specifications below, over the full operation ...

Page 79 - LOAD CAPACITY SPECIFICATIONS; OUTPUT RISE TIME

PC 8153 User’s Manual Power Supply Specification 69 LOAD CAPACITY SPECIFICATIONS The cross regulation defined as follows, the voltage regulation limits DC include DC Output ripple & noise. LOAD +3.3V +5V +12V -12V +5VSB Condition_1 X X X X 2A Condition_2 0.5A 0.3A 1A 0A 0.1A Condition_3 0.5A 2A ...

Page 80 - SHORT CIRCUIT PROTECTION; Efficiency; Operating temperature range:; Condensing

PC 8153 User’s Manual 70 Power Supply Specification SHORT CIRCUIT PROTECTION Output short circuit is defined to be a short circuit load of less than 0.1 ohm. In the event of an output short circuit condition on +3.3V, +5V or +12V output, the power supply will shutdown and latch off. The power supply...

Page 81 - Reliability

PC 8153 User’s Manual Power Supply Specification 71 Vibration: 0.25G, 10~250Hz Shock: -40G, 11mSec for Storage, -10G, 11mSec for operating 4. Reliability The power supply reliability, when calculated by MIL- HDBK; latest revision, are exceed 100,000 hours with all output at maximum load and an ambie...