Intel MPRTM0020 - Manuals

6 Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 Revision History Date Revision Description April 2006 004 Updated values for temperature sensor thresholds in “Sensor Data Record for RTM” table. Updated faceplate illustration. January 2006 003 Initial production release....

Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 7 Document Organization Document Organization 1 The Intel NetStructure ® MPRTM0020 Rear Transition Module Technical Product Specification is organized as follows: • Chapter 1, “Document Organization” provides a table of acro...

Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 9 Functional Overview Functional Overview 2 Rear Transition Modules (RTM) are important components in many telecommunications and embedded systems. These environments place most of the active components on a Front Board and ...

Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 11 Operating the Unit Operating the Unit 3 3.1 Introduction The Intel NetStructure ® MPRTM0020 Rear Transition Module is a non-intelligent RTM. A non- intelligent FRU does not have a remote management controller (RMC) on boa...

12 Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 Operating the Unit 3.4 Digital Ground to Chassis Ground Connection Digital ground can be tied to chassis ground through a jumper (P2) located near the bottom, right corner of the RTM. In the default grounding for the MPRT...

14 Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 Module Components Module Components 4 4.1 Block Diagram Figure 4 shows a functional block diagram of the RTM. Figure 4. RTM Functional Block Diagram P30 Bac k p lane Rear P a nel RJ-45 Serial Port USB Port RJ-45 GbE Port ...

Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 15 Module Components 4.2 Physical Layout Figure 5. Rear Transition Module (RTM)

Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 17 Module Components 4.3 Components Description The following sections describe the components shown in Figure 4 through Figure 6 . 4.3.1 Serial Port Interface One serial port (RS-232) connector is present on the RTM. This c...

18 Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 Module Components 4.3.2 USB Interface One USB port is provided on the RTM. 5V power is available through this USB port with a current limit of 400mA. Figure 8 illustrates the USB connector and Table 3 provides pinout info...

Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 19 Module Components 4.3.4 SAS Connector Interface One x4 SAS (Serial Attached SCSI) connector is present on the RTM. When the MPRTM0020 is connected to a MPCBL0020 Single Board Computer, only three of the four high-speed se...

20 Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 Module Components Note: The SAS_RX3 and SAS_TX3 interfaces are not physically connected to the SAS controller on MPCBL0020. The physical routing for these signals exists on the MPRTM0020 but is not supported on the SBC. S...

Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 21 Module Components 4.3.6 Zone 3 Rear Transition Module Power Connector (P30) The P30 connector is a bladed connector originally developed for FutureBus* applications. Figure 12 illustrates the connector outline and Table 7...

Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 23 Module Components 4.3.7 Zone 3 Rear Transition Module Data/Control Connectors The MPRTM0020 implementation includes three data connectors (P31, P32, P33) that mate directly to the MPCBL0020 Single Board Computer without c...

24 Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 Module Components 4.3.7.2 Zone 3 Rear Transition Module Data Connector (P32) The P32 connector on the RTM connects to J32 on the MPCBL0020 Single Board Computer and is used to route the T1/E1 signals from the PMC slots (o...

Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 25 Module Components AP3[x] indicates that these T1/E1 signals are routed from PMC 3. 4.3.8 Alignment Blocks The MPRTM0020 Rear Transition Module implements the rK1 and A2 alignment blocks at the top of Zone 2 and Zone 3, as...

26 Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 Module Components 4.3.10 Power Supplies The MPRTM0020 RTM needs several voltages that are not available from the SBC. The P30 connection to the SBC only provides two power supplies: • +12 V voltage rail (420 mA maximum cu...

Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 27 Module Components • +1.8V : The 1.8 V voltage is used as the input voltage to the SAS re-driver IC. 4.3.11 SAS Redriver The MPCBL0020 Single Board Computer implements optional SAS storage access via the MPRTM0020 RTM. SAS...

28 Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 Module Components 4.3.13 RJ-45 Gigabit Ethernet Port LEDs The RJ-45 connector for each of the Gigabit Ethernet ports on the RTM has two indicator LEDs integrated in the connector body. As shown in Figure 15 , the top LED ...

30 Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 RTM Management Architecture RTM Management Architecture 5 5.1 Introduction This section describes the management support for a non-intelligent Rear Transition Module (RTM) such as the MPRTM0020. A non-intelligent RTM FRU ...

Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 31 RTM Management Architecture 5.4 Power Budget Management The SBC IPMC has inherent knowledge of the non-intelligent RTM power requirements. The IPMC will handle power negotiation commands from the Shelf Manager that are ta...

Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 33 Detailed Specifications Detailed Specifications 6 6.1 Dimensions and Weight The weight of the baseboard is 1.14 kg (2.5 lbs.) with packaging materials. 6.2 Environmental Specification The test methodology is a combination...

Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 35 Detailed Specifications 6.4 Reliability Specifications 6.4.1 Mean Time Between Failure (MTBF) Specifications Calculation Type: MTBF/FIT Rate Standard: Telcordia* Standard SR-332 Issue 1 Methods: Method I, Case I, Quality ...

36 Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 Detailed Specifications 6.4.1.3 General Notes • Method I, Case I = Based on parts count. Equipment failure is estimated by totaling device failures rates and quantities used. • Quality Level II = Devices purchased to spec...

Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 37 Warranty Information Warranty Information 7 7.1 Intel NetStructure ® Compute Boards and Platform Products Limited Warranty Intel warrants to the original owner that the product delivered in this package will be free from ...

Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 39 Warranty Information 7.2.4 Limitation of Liability and Remedies INTEL SHALL HAVE NO LIABILITY FOR ANY INDIRECT OR SPECULATIVE DAMAGES (INCLUDING, WITHOUT LIMITING THE FOREGOING, CONSEQUENTIAL, INCIDENTAL AND SPECIAL DAMAG...

40 Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 Customer Support Customer Support 8 8.1 Customer Support This chapter offers technical and sales assistance information for this product. 8.2 Technical Support and Return for Service Assistance For all product returns and...

Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 41 Certifications Certifications 9 Safety: • IEC60950-1 • EN60950 • UL/CSA 60950-1 Hazardous substances: • The Intel NetStructure ® MPRTM0020S00Q has been verified to be compliant with the European Directive 2002/95/EC, offi...

42 Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 Agency Information Agency Information 10 10.1 North America (FCC Class A) Federal Communications Commission (FCC) Part 15 Rules This equipment has been tested and found to comply with the limits for a Class A digital devi...

Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 43 Agency Information Compliance with the R&TTE Directive The R&TTE Directive includes its own safety and EMC requirements. Although equipment declared compliant to the R&TTE Directive does not require explicit d...

44 Intel NetStructure ® MPRTM0020 Technical Product Specification – April 2006 Safety Warnings Safety Warnings 11 11.1 Safety Precautions Review the following precautions to avoid personal injury and prevent damage to this product or products to which it is connected. To avoid potential hazards, use...