Page 2 - ii; Disclaimers; CorporationAll Rights Reserved
ii Disclaimers This manual has been carefully checked and believed to contain accurate information. Acnodes Corporation assumes no responsibility for any infringements of patents or any third party’s rights, and any liability arising from such use. ACNODES does not warrant or assume any legal liabil...
Page 3 - iii; Safety Approvals; CE Marking; F C C Co m pl ia n c e; doesn’t connect with the receiver.
iii Safety Approvals CE Marking FCC Class A F C C Co m pl ia n c e This equipment has been tested in compliance with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are meant to provide reasonable protection against harmful interference in a residential in...
Page 4 - Safety Precautions
iv Safety Precautions Before getting started, please read the following important safety precautions. 1. The FPC 5084 does not come equipped with an operating system. An operating system must be loaded first before installing any software into the computer. 2. Be sure to ground yourself to prevent s...
Page 5 - Trademarks Acknowledgments; Intel
v Before handling a board or integrated circuit, touch an unpainted portion of the system unit chassis for a few seconds. This will help to discharge any static electricity on your body. When handling boards and components, wear a wrist- grounding strap, available from most electronic component stor...
Page 6 - vi; Table of Contents
vi Table of Contents Disclaimers ..........................................................................ii Safety Approvals................................................................. iii Safety Precautions..............................................................iv CHAPTER 1 INTRODUCTIO...
Page 7 - vii
vii CHAPTER 4 DRIVERS INSTALLATION...................... 58 4.1 System .............................................................. 58 4.2 Touch Screen ................................................... 59 4.2.1 Specification.............................................................. 59 4.2.2 ...
Page 8 - viii; MEMO
Page 9 - Introduction; CHAPTER 1; General Description; Reliable and Stable Design
Introduction 1 FPC 5084 User Manual CHAPTER 1 INTRODUCTION This chapter contains general information and detailed specifications of the FPC 5084 . Chapter 1 includes the following sections: General Description Specification Dimensions I/O Outlets Package List 1.1 General Description The FPC 5084 is ...
Page 10 - Industrial-grade Product Design; System Chipset
FPC 5084 2 Introduction CompactFlash ™ card, which makes it suitable for vibration environments. Embedded O.S. Supported The FPC 5084 not only supports W indows ® XP, but also supports embedded OS, such as W indows ® CE.NET, and Windows ® XP embedded. For storage device, the FPC 5084 830 supports Co...
Page 15 - VGA
FPC 5084 User Manual Introduction 7 1.4 I/O Outlets Please refer to the following illustration for I/O locations of the FPC-5084 . No Function 1 POWER SWITCH (ATX) 2 10-30VDC POWER Input 3 COM 1 (RS-232/422/485) 4 COM 2 (RS-232) 5 VGA 6 ETHERNET (RJ-45) 7 USB 2.0 X 2 8 AUDIO (LINE-OUT)
Page 17 - Hardware Installation; CHAPTER 2; CF card Installation
FPC 5084 User Manual Hardware Installation 9 CHAPTER 2 HARDWARE INSTALLATION The FPC 5084 provides rich I/O ports and flexible expansions for you to meet different demand, for example, CF card. The chapter will show you how to install the hardware. It includes: CompactFlash ™ Card Serial Port Ethern...
Page 18 - Step 2; Find out the cover on the side of the system.; Step 3; Locate the CompactFlash; socket, and insert the card into
FPC 5084 Hardware Installation 10 Step 2 Find out the cover on the side of the system. Step 3 Locate the CompactFlash TM socket, and insert the card into the socket.
Page 19 - Serial Ports Interface; The; Pin
FPC 5084 User Manual Hardware Installation 11 2.2 Serial Ports Interface The FPC 5084 has two onboard serial ports, COM1 (RS-232/ 422/ 485) and COM2 (RS-232). The following table shows you the pin assignments of this connector: Pin Signal Pin Signal 1 Data Carrier Detect (DCD) 6 Data Set Ready (DSR)...
Page 21 - RJ45 termination
FPC 5084 User Manual Hardware Installation 13 2.3 Ethernet The FPC 5084 is equipped with a high performance Plug and Play Ethernet interface, full compliant with IEEE 802.3 standard, and can be connected with a RJ-45 LAN connector. Please refer to detailed pin assignment list below: Pin Signal 1 2 3...
Page 24 - Step 1; Find out the screws as marked on the back side of chassis.
FPC 5084 Hardware Installation 16 2.4.3 Desktop-Mounting The FPC 5084 is designed for desktop mounting application. Please refer to the following steps: Step 1 Find out the screws as marked on the back side of chassis.
Page 26 - Find out the screws as marked on the back side of chassis.
FPC 5084 Hardware Installation 18 2.4.4 VESA-ARM Mounting Step 1 Find out the screws as marked on the back side of chassis. Step 2 Assemble the VESA-ARM to the back side of the chassis, and fix the screws.
Page 27 - VESA mounting Installation completed.
FPC 5084 User Manual Hardware Installation 19 Step 3 VESA mounting Installation completed.
Page 29 - DRAM Installation; . Un s cr e w si x s c r e ws to r em o ve th e r e ar c h a s s is .
FPC 5084 User Manual Hardware Installation 21 2.5 DRAM Installation T h e F P C 5 0 8 4 pr o vid e s o n e 2 0 0 - p in D DR2 SO - DI M M s o c k e t th a t su p p o r t s ys te m me m o r y u p to 2 G B. Please follow steps below to install the memory modules: 1 . Un s cr e w si x s c r e ws to r e...
Page 31 - Wireless LAN Card Installation; . O p e n t h e b a ck c o ve r an d fin d m a in b oa r d ( SB C8 7 8 3 0 ) .
FPC 5084 User Manual Hardware Installation 23 2.6 Wireless LAN Card Installation T h e F PC 5 0 8 4 p r o vid e s o n e Min i c a r d s o c k e t fo r u se r t o in st a l l o n e wir e le s s L AN c a r d . W hen in s ta llin g th e wir e le s s L AN c a r d , r e fer t o th e fo llo w in g in str ...
Page 32 - M AIN
FPC 5084 Hardware Installation 24 3 . F in d th e b u ilt- in An te n n a ca b le wh ic h i s tie d with o t h e r c a b le s o n t h e t o p o f t h e d e vic e . Co n n e ct a n te n n a c a b le t o M AIN c o n n e ct o r o n wir e le s s L AN c a r d . 4 . T h e r e a r e two c o n n e c to r s ...
Page 35 - AMI BIOS Setup Utility; CHAPTER 3; To enter the setup screens, follow the steps below:; Navigation Keys; Note
FPC 5084 User Manual AMI BIOS Setup Utility 25 CHAPTER 3 AMI BIOS SETUP UTILITY This chapter provides users with detailed description how to set up basic system configuration through the AMI BIOS setup utility. 3.1 Starting To enter the setup screens, follow the steps below: 1. Turn on the computer ...
Page 38 - Configure advanced CPU settings; Use this item to enable or disable the C-State technology.
FPC 5084 28 AMI BIOS Setup Utility Configure advanced CPU settings This screen shows the CPU Configuration, and you can change the value of the selected option. Max CPUID Value Limit You can enable this item to let legacy operating systems boot even without support for CPUs with extended CPU ID func...
Page 39 - IDE Configuration
FPC 5084 User Manual AMI BIOS Setup Utility 29 Enhanced C-States This item allows you to enable or disable any available enhanced C-states ( C1E, C2E, C3E, C4E and Hard C4E). IDE Configuration You can use this screen to select options for the IDE Configuration, and change the value of the selected o...
Page 41 - Serial Port4 Address; This item specifies the IRQ used by the serial port 4.
FPC 5084 User Manual AMI BIOS Setup Utility 31 Serial Port4 Address This item specifies the base I/O port address and Interrupt Request address of serial port 4. Serial Port4 IRQ This item specifies the IRQ used by the serial port 4.
Page 42 - Hardw are Health Configuration
FPC 5084 32 AMI BIOS Setup Utility Hardw are Health Configuration This screen shows the Hardware Health Configuration, and a description of the selected item appears on the right side of the screen. System Temperature/CPU Temperature These items display the temperature of CPU and System, Vcore, etc.
Page 43 - ACPI Settings
FPC 5084 User Manual AMI BIOS Setup Utility 33 ACPI Settings You can use this screen to select options for the ACPI Settings, and change the value of the selected option. A description of the selected item appears on the right side of the screen.
Page 44 - APM Configuration; Enabled; Video Pow er Dow n Mode
FPC 5084 34 AMI BIOS Setup Utility Disabled Set this item to prevent the chipset power management and APM (Advanced Power Management) features. Enabled Set this item to allow the chipset power management and APM (Advanced Power Management) features. This is the default setting. APM Configuration You...
Page 45 - Hard Disk Drive Pow er Dow n Mode; The default setting is; Throttle Slow Clock Ratio; This option specifies how the externally mounted power
FPC 5084 User Manual AMI BIOS Setup Utility 35 Disabled This setting prevents hard disk drive power down mode. Suspend This option cuts the power to the hard disk drives during a system suspend. This is the default setting. Disabled This setting prevents the system from entering suspend mode. This i...
Page 46 - Resume On Ring
FPC 5084 36 AMI BIOS Setup Utility On/Off Pushing the power button turns the computer on or off. This is the default setting. This is the default setting. Suspend Pushing the power button places the computer in Suspend mode or Full On power mode. button on the front of the computer chassis is used. ...
Page 47 - MPS Configuration
FPC 5084 User Manual AMI BIOS Setup Utility 37 MPS Configuration This screen shows the MPS (Multi Processor Specification) Configuration, and you can change its value. A description of the selected item appears on the right side of the screen. MPS Revision Use this item to select MPS (Multi Processo...
Page 48 - PCI Express Configuration; Disabled
FPC 5084 38 AMI BIOS Setup Utility PCI Express Configuration This screen shows the PCI Express Configuration, and you can change its value. A description of the selected item appears on the right side of the screen. Active State Pow er-Management Use this item to enable or disable the function of Ac...
Page 49 - SB PCIE Ports Configuration
FPC 5084 User Manual AMI BIOS Setup Utility 39 SB PCIE Ports Configuration Scroll to this item and press <Enter> to view the SB PCIE Ports Configuration sub menu, which contains several options for your configuration.
Page 50 - USB Configuration; USB 2.0 Controller Mode; HiSpeed
FPC 5084 40 AMI BIOS Setup Utility USB Configuration You can use this screen to select options for the USB Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen. Legacy USB Support Use this item to enable or disable sup...
Page 52 - Clear NVRAM; No; PCI Latency Timer
FPC 5084 42 AMI BIOS Setup Utility Clear NVRAM (2) Use this item to clear the data in the NVRAM (CMOS). Here are the options for your selection, No and Yes . Plug & Play O/S When the setting is No, Use this item to configure all the devices in the system. W hen the setting is Yes and if you inst...
Page 53 - Palette Snooping; and; PCI IDE BusMaster; and; OffBoard PCI/ISA IDE Card; and
FPC 5084 User Manual AMI BIOS Setup Utility 43 and Yes . Palette Snooping Some old graphic controllers need to “snoop” on the VGA palette, and then map it to their display as a way to provide boot information and VGA compatibility. This item allows such snooping to take place. Here are the options f...
Page 54 - Boot Settings Configuration; Lan Boot Settings Configuration
FPC 5084 44 AMI BIOS Setup Utility 3.6 Boot Menu The Boot menu allows users to change boot options of the system. You can select any of the items in the left frame of the screen to go to the sub menus: Boot Settings Configuration Boot Device Priority Removable Drives Lan Boot Settings Configuration ...
Page 55 - Quiet Boot; AddOn ROM Display Mode; Force BIOS
FPC 5084 User Manual AMI BIOS Setup Utility 45 Boot Settings Configuration Quick Boot Enabling this item lets the BIOS skip some power on self tests (POST). The default setting is Enabled . Quiet Boot Disabled Set this item to allow the computer system to display the POST messages. Enabled Set this ...
Page 57 - Removable Drives
FPC 5084 User Manual AMI BIOS Setup Utility 47 Removable Drives Use this screen to view the removable drives in the system. The BIOS will attempt to arrange the removable drive boot sequence automatically. You can also change the booting sequence.
Page 59 - Supervisor Passw ord; Select this option and press to access the sub
FPC 5084 User Manual AMI BIOS Setup Utility 49 3.7 Security Menu The Security menu allows users to change the security settings for the system. Supervisor Passw ord This item indicates whether a supervisor password has been set. If the password has been installed, Installed displays. If not, Not Ins...
Page 60 - Boot Sector Virus Protection
FPC 5084 50 AMI BIOS Setup Utility menu. You can use the sub menu to change the user password. Boot Sector Virus Protection This option is near the bottom of the Security Setup screen. The default setting is Disabled . Disabled Set this item to prevent the Boot Sector Virus Protection. This is the d...
Page 61 - North Bridge Configuration; For items marked with “
FPC 5084 User Manual AMI BIOS Setup Utility 51 3.8 Chipset Menu The Chipset menu allows users to change the advanced chipset settings. You can select any of the items in the left frame of the screen to go to the sub menus: North Bridge Configuration South Bridge Configuration For items marked with “...
Page 64 - South Bridge Configuration
FPC 5084 54 AMI BIOS Setup Utility South Bridge Configuration (1)
Page 65 - USB Function; This item allows you to enable or disable USB function.; Audio Controller; This item allows you to enable or disable the audio support.; Restore on AC Pow er Loss
FPC 5084 User Manual AMI BIOS Setup Utility 55 (2) USB Function This item allows you to enable or disable USB function. USB 2.0 Controller This item allows you to enable or disable the USB 2.0 controller. Audio Controller This item allows you to enable or disable the audio support. SLP_S4# Min. Asse...
Page 66 - Save Changes and Exit; Discard Changes and Exit; Discard Changes
FPC 5084 56 AMI BIOS Setup Utility This item allows you to set or disable the PCI Express Ports. 3.9 Exit Menu The Exit menu allows users to load your system configuration with optimal or failsafe default values. Save Changes and Exit When you have completed the system configuration changes, select ...
Page 67 - Load Optimal Defaults
FPC 5084 User Manual AMI BIOS Setup Utility 57 Use this item to abandon all changes. Load Optimal Defaults It automatically sets all Setup options to a complete set of default settings when you select this option. The Optimal settings are designed for maximum system performance, but may not work bes...
Page 68 - Installation of Drivers; CHAPTER 4; Insert Driver CD and select the
FPC 5084 58 Installation of Drivers CHAPTER 4 DRIVERS INSTALLATION 4.1 System FPC 5084 supports W indows 2000/XP. To facilitate the installation of system driver, please carefully read the instructions in this chapter before start installing. 1. Insert Driver CD and select the “ \Drivers\XP ” . 2. S...
Page 69 - -wire Analog Resistive type; Insert Driver CD and follow the path to select the
FPC 5084 User Manual Installation of Drivers 59 4.2 Touch Screen T h e FP C 5 0 8 4 u s e s t h e 5- wir e a n a lo g r e s is tve . T h e r e a r e th e s p e cif ic a tio n a n d d r ive r in s ta lla tio n wh ich a r e lis te d b e l o w. 4.2.1 Specification Touch Screen 5-wire Analog Resistive t...
Page 72 - PenMount Touch screen
FPC 5084 62 Installation of Drivers 4.3 Embedded O.S. T h e G O T - 5 8 4 0 T p r o vid e s th e W in d o ws X P E m b e d d e d a n d W ind o ws C E. Ne t 6 . 0 . T h e O .S. is s u p p o r te d d e vic e s wh i ch a r e list e d b e lo w. 4.3.1 Windows XP Embedded Here are supported onboard device...
Page 73 - Calibration Touch screen
FPC 5084 User Manual Installation of Drivers 63 4.3.2 Windows CE.NET 6.0 Here are supported onboard devices: Onboard Multi I/O USB PS2 Keyboard and mouse CRT/LCD display 10/100/1000 base-T Ethernet Compact Flash Onboard Audio Audio Touch Screen Calibration Touch screen In this image we add PenMount ...