Intel EX-98211 FANLESS CELERON - Manuals

Page 2 - General Information; Fanless and Modular CPU Board

Chapter 1 1 General Information 1.1 Introduction The EX-98211 Box PC is targeted at many different application fields. By adopting it, you can pinpoint specific markets, such as Thin Client, KIOSK, information booth, GSM Server, environment-critical and space-critical applications. All-In-One Platfo...

Page 4 - Power Information; arrangement of these ports is shown in Figure 1.1 & Figure 1.2

1.4 Power Information 1.5 I/O Ports Arrangement The EX-98211 has 4 serial ports, 6 USB (Host) ports, and 2 RJ-45 LAN ports. The arrangement of these ports is shown in Figure 1.1 & Figure 1.2 1.5.1 Front View Figure 1.1: Front View of EX-98211 1.5.2 Back View Figure 1.2: Back View of EX-98211

Page 5 - makes system customization feasible.

1.6 Dimensions ‧ Dimension (W x H x D): 195 x 268 x 80 mm (7.68" x 10.55" x 3.15") Figure 1.3: Dimensions Chapter2 The Engine of EX-98211 2.1 Introduction The engine of EX-98211 is constructed by the combination of one PCBA board. Such a combination makes system customization feasible. F...

Page 6 - Jumpers and Connectors; EX-98211 Main Board Jumper Setting

Figure 2.2: EX-98211 Main Board Bottom View 2.2 Jumpers and Connectors EX-98211 Main Board Jumper Setting

Page 7 - EX-98211 Main Board Connector Setting

Page 8 - JP1 LAN LED Connector

JRS1 RS-232/422/485 Selection JP1 LAN LED Connector

Page 9 - IDE1: Primary IDE Connector

IDE1: Primary IDE Connector Connector type: One onboard 44-pin box headers, primary IDE

Page 10 - LPT1: Parallel Port Connector

CFD1: Compact Flash Disk (Share IDE1) Connector type: 50-pin compact flash type I/II LPT1: Parallel Port Connector Connector type: D-Sub 25-pin female. SATA1~2: S-ATA1 Connector

Page 12 - Connector type: external 6-pin Mini DIN connector on bracket; AUDIO1: Audio Interface Port

CN1: (COM1~4 +GPIO 2 In/2 Out Option RS422/485 output) IR1: Infrared (IR) Connector KBM1: PS/2 Keyboard & Mouse Connector type: external 6-pin Mini DIN connector on bracket AUDIO1: Audio Interface Port PWRIN1: DC Adapter Power Input

Page 13 - Hardware Installation; Locate 6 screws which secure the top cover.

RS-422/485, GPIO Function Jumper Chapter 3 Maintenance Hardware Installation The EX-98211 is designed to be modular, slim and lightweight for easier maintenance. The following section describes simple hardware installations. 3.1 Remove Top Cover 1. Locate 6 screws which secure the top cover. 2. Use ...

Page 15 - Installing Memory Module; Firmly insert the LONG DIMM into the socket.; Installing CF Card; Locate 2 screws which secure the Thermal Lump of South Bridge.

3.3 Installing Memory Module 1. Locate the 240-pin LONG DIMM sockets. 2. Align the LONG DIMM on the socket and let the notch on the LONG DIMM meet the break on socket. 3. Firmly insert the LONG DIMM into the socket. 3.4 Installing CF Card 1. Locate 2 screws which secure the Thermal Lump of South Bri...

Page 16 - Remove the Thermal Lump of South Bridge.; Remove Bottom Cover; Unscrew 6 screws which secure the bottom cover.

3. Remove the Thermal Lump of South Bridge. 4. To install a Compact Flash Memory Card into the Main Board, align the notch on the card with the Compact Flash socket in the Main Boa rd. Then firmly insert the card into the socket until it is completely seated. 3.5 Remove Bottom Cover 1. Unscrew 6 scr...

Page 17 - Installing Hard Disk Drive; Locate the 4 screws on the HDD Holder Bracket.

3.6 Installing Hard Disk Drive 1. Upside down the Box PC. Remove the Bottom Cover. 2. Locate the 4 screws on the HDD Holder Bracket. 3. Use screw drvier to remove the screws. Keep the screws safely for later use. 4. Put the HDD into the HDD Holder Bracket and screw it on.

Page 18 - Connect the SATA cable between the HDD and the Main Board.; Installing Riser Card; Locate the screw on the slot bracket.

5. Connect the SATA cable between the HDD and the Main Board. 3.7 Installing Riser Card 1. Insert PCI card into the PCI slot. 2. Locate the screw on the slot bracket. 3. Use screw driver to remove the screw. Keep the screw safely for later use.