Impex TSA-499 - Manuals - manualsarea.com

Page 2 - TABLE OF CONTENTS; please call our; Toll-Free Customer Service Number

TABLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICE....................................................................... 2 HARDWARE IDENTIFIER.....…..........................................................

Page 3 - IMPORTANT SAFETY NOTICE

IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precau...

Page 4 - WARNING LABEL PLACEMENT

WARNING LABEL PLACEMENT The Warning Label shown here has been placed on the Front Stabilizer. If the label is missing or illegible, please call customer service at 1-800-999-8899 for replacement. Apply the label in location shown. 3

Page 5 - HARDWARE PACK

Page 7 - DIAGRAM 1

ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Connect the Left & Right Upright Beams (#1 & 2) by a Cross ...

Page 8 - DIAGRAM 2

STEP 2 (See Diagram 2) A.) Attach the Leg Developer Holder (#4) to the Front Stabilizer (#3). Secure it with two M10 x ¾” Allen Bolts (#45) and Ø ¾” Washers (#49). B.) Attach the Leg Developer Holder to the Main Seat Support (#5). Secure it with two M10 x 2 3/8” Carriage Bolts (#41), Ø ¾” Washers (#...

Page 9 - DIAGRAM 3

STEP 3 (See Diagram 3) A.) Attach the Leg Developer (#6) to the Leg Developer Holder (#4). Secure it with one M10 x 2 7/8” Allen Bolt (#44), two Ø ¾” W ashers (#49), and one M10 Aircraft Nut (#48). B.) Insert two Foam Roll Tubes (#16) halfway through the holes on the Leg Developer (#6). Push four Fo...

Page 10 - DIAGRAM 4

STEP 4 (See Diagram 4) A.) Attach the side-holes on the Backrest Supports (#15) to the pivot on the Main Seat Support (#5). Place the other end of Backrest Supports rest against the Backrest Adjustment Bar. B.) Attach the Backrest Board (#18) to the Backrest Supports. Secure it with four M6 x 1 3/8”...

Page 11 - DIAGRAM 5

STEP 5 (See Diagram 5) A.) Attach the Cable (#20) to the open slot on the top of the Lat Bar Frame (#7). Attach a Pulley (#35) to the Cable. Secure the Pulley to the open slot with one M10 x 2 1/8” Allen Bolt (#43), two Pulley Bushings (#21), and one M10 Aircraft Nut (#48). B.) Draw the Cable around...

Page 13 - PARTS LIST

PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Left Upright Beam 1 2 Right Upright Beam 1 3 Front Stabilizer 1 4 Leg Developer Holder 1 5 Main Seat Support 1 6 Leg Developer 1 7 Lat Bar Frame 1 8 Cross Brace 1 9 Backrest Adjustment Bar 1 10 Lat Bar 1 11 Sliding W eight Post 1 12 Left Safety Catch 1 13 Right ...

Page 14 - LIMITED WARRANTY

IMPEX INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IMPEX's...