Impex SM-600 - Manuals - manualsarea.com

Page 2 - TABLE OF CONTENTS; please call our TOLL-FREE customer service number.; Toll-Free Customer Service Number

TABLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICE....................................................................... 2 HARDW ARE PACK…….......…...........................................................

Page 3 - IMPORTANT SAFETY NOTICE

IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precau...

Page 4 - HARDWARE PACK

Page 5 - ASSEMBLY INSTRUCTION

ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Connect the two Stabilizers (#1) by a Cross Brace (#4) in the mid-s...

Page 6 - DIAGRAM 2

STEP 2 (See Diagram 2) A.) Slide both a Rubber Bumper (20) and Safety Stop (#6) onto a Guide Rod (#8). B.) Slide a Sliding Bar Catch (#5) onto the Guide Rod from the top. C.) Insert the bottom of Guide Rod into the ring cap on the left Stabilizer. Insert the top of Guide Rod into the ring cap on top...

Page 7 - DIAGRAM 3

STEP 3 (See Diagram 3) A.) NOTE: Help of another person is strongly recommended for this step. Place the Lifting Sleeve (#9) in between the two Sliding Bar Catches (#5). Align the holes. Insert the Weight Bar (#10) into the Bar Catch from one end and through the Lifting Sleeve to the other Bar Catch...

Page 8 - DIAGRAM 4

STEP 4 (See Diagram 4) A.) Attach the rear of the Bench Main Base Frame (#27) to the Bench Rear Stabilizer (#28). Secure it with one 4 ¾” x 2” Bracket (#13), two M10 x 2 ¾” Carriage Bolts (#23), two Ø ¾” Washers (#25), and two M10 Aircraft Nuts (#24). B.) Attach the front of the Bench Main Base Fram...

Page 9 - DIAGRAM 5

STEP 5 (See Diagram 5) A.) Attach two Ø ½” Bushings (#35) to both ends of the pivot on the Backrest Incline Support (#30). B.) Place the Backrest Incline Support (#30) in between the two Backrest Supports (#29). Align the holes. Insert one M10 x 7 ¼” Allen Bolt (#39) through the holes and secure it ...

Page 10 - DIAGRAM 6

STEP 6 (See Diagram 6) A.) Place the Backrest Board (#33) onto the Backrest Supports. Secure it with four M6 x 2” Hex Bolts (#41) and Ø ½” Washers (#42). B.) Place the Seat (#34) onto the Seat Supports. Secure it with four M6 x 2” Hex Bolts (#41) and Ø ½” Washers (#42). DIAGRAM 6 9

Page 13 - LIMITED WARRANTY

IMPEX INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IMPEX's...