Impex PL 200 - Manuals - manualsarea.com

Page 2 - please call our TOLL-FREE customer service number.; Toll-Free Customer Service Number

TABLE OF CONTENTS BEFORE YOU BEGIN...................................................................................…. 1 IMPORTANT SAFETY NOTICES..................................................................…. 2 HARDWARE PACK……….....…................................................................

Page 3 - IMPORTANT SAFETY NOTICE

IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precau...

Page 4 - HARDWARE PACK

HARDWARE PACK Part# Description Identifier #5 L-shape Handlebar Adjustment Knob (1) #6 Ø 5/8” Washer (1) #16 Seat Post Lock Knob (1) #17 M8 x 5/8” Allen Bolt (3) #18 Ø 5/8” Bent Washer (3) #23 M10 x 2 3/8” Carriage Bolt (4) #24 M10 Acorn Nut (4) #25 ∅ 1” Bent Washer (4) Tool: Allen Wrench (1) 3

Page 5 - Diagram 1

ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Adjustable Wrench and Allen Wrench NOTE: It is strongly recommended this machine be assembled by two or more people to avoid possible injury. STEP 1 (See Diagram1) A.) Attach the Rear Stabilizer (#26) to the Main Frame (#15). Secure it with...

Page 6 - DIAGRAM

STEP 2 (See Diagram 2) A.) Attach the Handlebar Post (#4) to the Main Frame (#15). Connect the Middle Computer Sensor Wire (#3) from the bottom of Handlebar Post to the Lower Computer Sensor Wire (#19) from the main body of the bike. Connect the Upper Tension Connector (#20) to the Bracket on the Lo...

Page 7 - HOW TO CONNECT TENSION CONNECTOR

HOW TO CONNECT TENSION CONNECTOR Slide the Cable wire from the Upper Tension Connector in between the opening on the wire holder on the Lower Tension Connector. Pull the Upper Tension Connector backward and slide the wire through the slot on the bracket. Drop down the Connector so the fitting sits f...

Page 8 - DIAGRAM 3

STEP 3 (See Diagram 3) A.) Insert the Handlebar (#7) halfway through the opening on the back of the Handlebar Post (#4). Adjust the position of the handlebar. Secure it with a L-shape Handlebar Adjustment Knob (#5) and Ø 5/8” Washer (#6). B.) Lubricate the inside of the Handlebar Grips (#31) with wa...

Page 9 - DIAGRAM 4

STEP 4 (See Diagram 4) A.) Attach the Seat (#8) to the top of the Seat Post (#10). Secure it with three Ø 5/16” Washers (#11), Ø 5/16” Spring Washers (#12), and M8 Nylon Nuts (#13). B.) Insert the Seat Post into the top opening on Main Frame (#15). Adjust the height of the Seat. Lock the Seat Post w...

Page 10 - DIAGRAM 5

STEP 5 (See Diagram 5) A.) Thread the Left Pedal (#27) counterclockwise onto the left Crank (#14). Thread the Right Pedal (#28) Clockwise onto the Crank on the other side. DIAGRAM 5 9

Page 11 - EXPLODED DIAGRAM

Page 13 - COMPUTER

COMPUTER DETAIL OF OPERATION: SET CLOCK: Once the batteries are installed, the Hour digit starts flashing. Press UP or DOWN button to set the hour and then press ENTER. After the Hour is set, the Minute digit starts flashing. Press UP or DOWN button to set the minute then press ENTER. Note: If you m...

Page 15 - LIMITED WARRANTY

IMPEX INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IMPEX's...