Impex NS-1101U - Manuals - manualsarea.com

Page 2 - TABLE OF CONTENTS; WARNING LABEL PLACEMENT............................................................. 3; BEFORE YOU BEGIN; please call our TOLL-FREE customer service number.; Toll-Free Customer Service Number

TABLE OF CONTENTS BEFORE YOU BEGIN...................................................................................…. 1 IMPORTANT SAFETY NOTICES..................................................................…. 2 WARNING LABEL PLACEMENT……………………………………………………. 3 HARDWARE PACK……….....….................

Page 3 - IMPORTANT SAFETY NOTICE; PRECAUTIONS; STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.; This exercise bike is for consumer and home use only.

© IMPEX INC. www.impex-fitness.com 2 IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particu...

Page 4 - WARNING LABEL PLACEMENT

WARNING LABEL PLACEMENT The Warning Labels and Caution Label shown here have been placed on the Rear Stabilizer. If the labels are missing or illegible, please call customer service at 1-800-999-8899 for replacement. Apply the labels in location shown. © IMPEX INC. www.impex-fitness.com 3

Page 5 - HARDWARE PACK

HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size. NO. DESCRIPTION IDENTIFIER Q’TY 7 Spacer 1 20 M8 x 3” Allen Bolt 4 16 Ø ¾” Curved Washer 4 21 Ø ½” Lock Washer 4 5 M5 x 1” Philips Screw 1 8 T-shaped Lock knob 1 Allen wrench 1 Crossing wre...

Page 6 - COMPONENTS FOR ASSEMBLY

COMPONENTS FOR ASSEMBLY © IMPEX INC. www.impex-fitness.com 5

Page 7 - ASSEMBLY INSTRUCTION; avoid possible injury.

ASSEMBLY INSTRUCTION  Tools Required For Assembling the Machine: One Crossing Wrench and Allen Wrench, provided by manufacturer.  NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury. STEP-1 A.) Attach the Front Stabilizer (#19) to the Main Frame ...

Page 8 - STEP 2

STEP 2 A.) Thread the Left Pedal (#27) counterclockwise into the Crank (#28). B.) Thread the Right Pedal (#25) clockwise into the Crank (#28). © IMPEX INC. www.impex-fitness.com 7

Page 9 - STEP 3

STEP 3 A.) NOTE: Extra help may be needed to hold the Front Post (#4) while connecting the cables and wires. B.) Remove the four M8 x ¾” Allen Bolts (#15) and four Ø ¾” Curved Washers (#16) pre-installed by factory from Front Post (#9). Slide the Front Cover (#18) onto the Front Post (#9). C.) Attac...

Page 10 - STEP 4; out of the Front Post.

STEP 4 A.) Attach the Handle (#2) to the Front Post (#9). B.) Insert the two Pulse Sensor Wires (#3) through the open slot on Front Post and then pull up and out of the Front Post. C.) Clamp the Handle to the Front Post. Secure it with T-shaped Lock Knob (#8), Spacer (#7), and the Clamp Cover (#6). ...

Page 11 - STEP 5

STEP 5 A.) Connect the Middle Computer Wire (#4) to the computer wire. B.) Connect the two Pulse Sensor Wires (#3) to the sensor wire from Computer (#1). C.) Slide the Computer onto the Front Post (#9). Secure it with one M5 x 1” Philips Screw (#5). © IMPEX INC. www.impex-fitness.com 10

Page 12 - STEP 6; securely lock the Seat in position.

STEP 6 A.) Insert the Seat Post (#14) into the Main Frame (#26). Use the Quick Release Knob (#24) to securely lock the Seat in position. B.) Remove M5 x 5/8” Philips Screw (#10) pre-installed by factory from Front Post (#9). Attach the Water Bottle Rack (#11) to Front Post (#9). Secure it with two t...

Page 14 - EXPLODED DIAGRAM

EXPLODED DIAGRAM © IMPEX INC. www.impex-fitness.com 13

Page 15 - PARTS LIST

© IMPEX INC. www.impex-fitness.com 14 PARTS LIST PART NO. DESCRIPTION SPEC. QUANTITY 1 Computer 1 2 Handle 1 3 Pulse Sensor Wire 2 4 Middle Computer Wire 1 5 Philips Screw M5 x 1” 1 6 Clamp Cover 1 7 Spacer 1 8 T-shaped Lock Knob 1 9 Front Post 1 10 Philips Screw M5 x 5/8” 2 11 Water Bottle Rack 1 1...

Page 16 - CARE, MAINTENANCE AND STORAGE; The maximum user weight is 300 lbs.; OPERATING NOTES; ADJUSTMENT

© IMPEX INC. www.impex-fitness.com 15 CARE, MAINTENANCE AND STORAGE 1. Inspect and tighten all parts each time you use the machine. Replace any worn parts immediately. 2. The bike can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents. 3. Store the bike IN-DOOR. Exces...

Page 17 - COMPUTER; DISTANCE

COMPUTER Set Up Time and Date 1. To set up time and date; remove batteries for few seconds, and then place batteries back. The computer will beep and display “8888” and then display Time/Date field. 2. Press “MODE” key to enter the Time or Date field. 3. Press “SET” key to set time/Date data . 4. Af...

Page 18 - EXERCISE GUIDELINES; MAGNETIC BIKE; The Exercise Phase

EXERCISE GUIDELINES Using your MAGNETIC BIKE will provide you with several benefits, it will improve your physical fitness, tone muscle and in conjunction with calorie controlled diet help you lose weight. 1. The Warm Up Phase This stage helps get the blood flowing around the body and the muscles wo...

Page 19 - The Cool Down Phase; MUSCLE TONING; To tone muscle while on your; you will need to have the resistance set quite; WEIGHT LOSS

© IMPEX INC. www.impex-fitness.com 18 3. The Cool Down Phase This stage is to let your Cardio-vascular System and muscles wind down. This is a repeat of the warm up exercise e.g. reduce your tempo, continue for approximately 5 minutes. The stretching exercises should now be repeated, again rememberi...

Page 20 - LIMITED WARRANTY

© IMPEX INC. www.impex-fitness.com 19 IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty exte...