Impex MD-823 - Manuals - manualsarea.com

Page 2 - Toll-Free Customer Service Number

TABLE OF CONTENTS BEFORE YOU BEGIN....................................................................................……….. 1 IMPORTANT SAFETY NOTICE...................................................................……….. 2 HARDWARE PACK……….....….........................................................

Page 3 - IMPORTANT SAFETY NOTICE

IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precau...

Page 6 - HARDWARE PACK

HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size. 5

Page 8 - ASSEMBLY INSTRUCTION; DIAGRAM 1

ASSEMBLY INSTRUCTION Tools required for assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Do not tighten Nuts and Bolts until instructed to do so. B.)...

Page 9 - DIAGRAM 2

STEP 2 (See Diagram 2) A.) Do not tighten Nuts and Bolts until instructed to do so. B.) Attach the Leg developer Holder (#5) to the Front Base (#10). Secure it with two M10 x 5/8”Allen Bolts (#56) and two Ø ¾” Washers (#70). Thread a Lock Knob (#51) into the Leg Developer Holder. C.) Slide the Slidi...

Page 10 - DIAGRAM 3

STEP 3 (See Diagram 3) A.) Place the Backrest Adjustment Bar (#7) onto the selected slots on the Left & Right Upright Beam (#1 & #2). B.) Attach the pivot on Seat Incline Support (#12) into the side holes on the two Seat Supports (#11). Place the other end of Seat Incline Support to the open...

Page 11 - DIAGRAM 4

STEP 4 (See Diagram 4) A.) Attach the Leg Developer (#8) to the Leg Developer Holder (#5). Secure it with one M10 x 3 1/8” Allen Bolt (#61), two  ¾” Washers (#70), and one M10 Aircraft Nut (#68). B.) Insert the Leg Developer Weight Post (#25) into the hole on Leg Developer. Secure it with one M10 x...

Page 12 - DIAGRAM 5

STEP 5 (See Diagram 5) A.) Attach the Backrest Board (#31) to the Backrest Supports (#13). Secure it with four M8 x 1 5/8” Allen Bolts (#55) and four Ø 5/8” Washers (#69). B.) Attach the Seat Pad (#30) to the Seat Supports (#11). Secure it with four M8 x 1 5/8” Allen Bolts (#55) and four Ø 5/8” Wash...

Page 15 - LIMITED WARRANTY

IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ®" ) warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IM...