Impex IGS-8862 - Manuals - manualsarea.com

Page 2 - Toll-Free Customer Service Number

TABLE OF CONTENTS BEFORE YOU BEGIN....................................................................................……….. 1 IMPORTANT SAFETY NOTICE...................................................................……….. 2 HARDWARE PACK……….....….........................................................

Page 3 - IMPORTANT SAFETY NOTICE

IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precau...

Page 5 - HARDWARE PACK

HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size. 4

Page 6 - ASSEMBLY INSTRUCTION

ASSEMBLY INSTRUCTION Tools Required for Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Do not tighten the Nuts and Bolts until instructed to do so....

Page 7 - DIAGRAM 2

STEP 2 (See Diagram 2) A.) Do not tighten Nuts and Bolts until instructed to do so. B.) Attach the rear of the Main Seat Support (#9) to the Rear Stabilizer (#11). Secure it with two M10 x 2 ¾” Carriage Bolts (#46) from bottom, one 4 3/8” x 1 ¾” Bracket (#28), two Ø ¾” Washers (#54), and two M10 Air...

Page 8 - DIAGRAM 3

STEP 3 (See Diagram 3) A.) Do not tighten Nuts and Bolts until instructed to do so. B.) Align the bracket on the Backrest Adjustment Support (#20) in between the two Backrest Supports (#25). Secure it with four M8 x 1 5/8” Allen Bolts (#52), eight Ø 5/8” Washers (#55), and four M8 Aircraft Nuts (#57...

Page 9 - DIAGRAM 4

STEP 4 (See Diagram 4) A.) Attach the Leg Developer (#13) to the leg developer holder on the Main Seat Support (#9). Secure it with one M10 x 3 ½” Allen Bolt (#48), two ∅ ¾” Washers (#54), and one M10 Aircraft Nut (#56). B.) Insert two Foam Tubes (#14) halfway through the holes on the Leg Developer....

Page 10 - DIAGRAM 5

STEP 5 (See Diagram 5) A.) Attach the Arm Curl Pad (#19) to the Arm Curl Bracket (#16). Secure it with two M8 x 5/8” Allen Bolts (#53) and Ø 5/8” Washers (#55). B.) Insert the Arm Curl Stand into the top opening on the Leg Developer holder. Use the Lock Knob (#42) to lock the Arm Curl Stand in posit...

Page 14 - LIMITED WARRANTY

IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ®" ) warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IM...