Impex IGS-8858 - Manuals - manualsarea.com

Page 2 - TABLE OF CONTENTS; BEFORE YOU BEGIN; INC. For your safety and benefit, read this manual carefully before; please call our TOLL-FREE customer service number.; Our Customer; Toll-Free Customer Service Number

TABLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICE....................................................................... 2 HARDW ARE PACK………..................................................................

Page 3 - IMPORTANT SAFETY NOTICE

IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precau...

Page 5 - HARDWARE PACK

Page 7 - ASSEMBLY INSTRUCTION; STEP 1; DIAGRAM 1

ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Connect the Left & Right Upright Beam (# 1 & #2) by a Cross...

Page 8 - DIAGRAM 2

STEP 2 (See Diagram 2) A.) Attach the front of Main Seat Support (#3) to the Front Post (#9). Secure it with two M10 x 3 1/8” Carriage Bolts (#41), one 6 ¼” Bent Bracket (#18), two Ø ¾” Washers (#49), and two M10 Aircraft Nuts (#52). B.) Attach the Main Seat Support to the top of Front Post. Secure ...

Page 9 - STEP 3; DIAGRAM 3

STEP 3 (See Diagram 3) A.) Attach the Backrest Incline Support (#13) to the side-holes on the two Backrest Supports (#12). Align the holes. Secure it with one M12 x 7 ¼” Allen Bolt (#43), two Ø ¾” Washers (#49), and one M12 Aircraft Nut (#52). B.) Attach the holes on the end of the Backrest Supports...

Page 10 - DIAGRAM 4

STEP 4 (See Diagram 4) A.) Attach the Backrest Board (#20) to the Backrest Supports (#12). Secure it with four M8 x 1 5/8” Allen Bolts (#45) and four Ø 5/8” Washers (#50). B.) Place the Seat (#21) onto the Seat Support (#11). Secure it with four M8 x 1 5/8” Allen Bolts (#45) and four Ø 5/8” Washers ...

Page 11 - STEP 5; DIAGRAM 5

STEP 5 (See Diagram 5) A.) Attach the Leg Developer (#8) to the Main Seat Support. Secure it with an Axle (#26), two M10 x 5/8” Allen Bolts (#44), and two Ø ¾” Washers (#49). B.) Insert two Foam Tubes (#19) halfway through the holes on the Leg Developer. Push four Foam Rolls (#29) onto the Tubes fro...

Page 14 - IMPEX INC; LIMITED WARRANTY

IMPEX INC . LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IMP...