Impex CB-181 - Manuals - manualsarea.com

Page 2 - TABLE OF CONTENTS; BEFORE YOU BEGIN; INC. For your safety and benefit, read this manual carefully; Toll-Free Customer Service Number

TABLE OF CONTENTS BEFORE YOU BEGIN...................................................................................…. 1 IMPORTANT SAFETY NOTICES..................................................................…. 2 HARDWARE PACK…….....….................................................................

Page 3 - IMPORTANT SAFETY NOTICE; CARE AND MAINTENANCE

IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precau...

Page 4 - WARNING LABEL PLACEMENT

WARNING LABEL PLACEMENT The Warning Label shown here has been placed on the Cross Brace. If the label is missing or illegible, please call customer service at 1-800-999-8899 for replacement. Apply the label in location shown. 3

Page 5 - HARDWARE PACK

HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler or scale to measure the size. 4

Page 6 - ASSEMBLY INSTRUCTION; Do not tighten Nuts and Bolts until instructed to do so.; DIAGRAM 1

ASSEMBLY INSTRUCTION Tools Required for Assembling this Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Do not tighten Nuts and Bolts until instructed to do so. B....

Page 7 - Securely tighten all Nuts and Bolts installed in Step-1 and Step-2.; DIAGRAM 2

STEP 2 (See Diagram 2) A.) Attach the Main Seat Support (#4) to the Front Post (#5). Secure it with two M10 x 2 ¼” Hex Bolts (#22), one 1 ½” x 4 ½” Bracket (#11), four Ø ¾” Washers (#26), and two M10 Aircraft Nuts (#30). B.) Attach the Main Seat Support to the Cross Brace (#3). Secure it with two M1...

Page 8 - Do not over tighten the Nut and Bolt. Make sure the Leg Developer; DIAGRAM 3

STEP 3 (See Diagram 3) A.) Attach the Leg Developer (#6) to the open bracket on the Front Post (#5). Secure it with one M8 x 2 ¾” Hex Bolt (#23), two Ø 5/8” Washers (#27), and one M8 Aircraft Nut (#29). Do not over tighten the Nut and Bolt. Make sure the Leg Developer can swivel freely. B.) Place th...

Page 9 - DIAGRAM 4

STEP 4 (See Diagram 4) A.) Attach the bottom side-holes on Backrest Supports (#8) to the pivot on the Main Seat Support (#4). Rest the other end against the Backrest Adjustment Bar (#7). B.) Attach the Backrest Board (#12) to the Backrest Support. Secure it with four M6 x 1 ½” Hex Bolts (#25) and fo...

Page 12 - LIMITED WARRANTY

IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IM...