Humax NA-3712 - Manuals

First and foremost, our knowledge of the set top box marketplace along with technical expertise differentiates HUMAX. Moreover, we maintain very close working relationships with our customers. We take a highly disciplined engineering approach to product design, manufacture,testing, acceptance and to...

Reference GB7 All our receivers are designed to be DiSEqC 1.0 compatible. This allows multiple antennas to beconnected to the STB simultaneously.If you have two or more fixed antennas or LNBs, you can use a DiSEqC 1.0 switch. 1. Connect the coaxial cable from the first LNB to the LNB 1 or LNB A inpu...

HUMAX digital set-top box is a highly sophisticated product-incorporating one of the best software applications. Whenever a problem is found with this software or, in fact, extra functions or enhanced applications are added, the software in the equipment has to be upgraded. In order to maintain prop...

, Press to change services down and up. SMART CARD SLOT Insert the SMART CARD with it’s IC-Chip part facing the bottom side. ERROR LED (AMBER) Indicates that the STB has an error. STANDBY LED (RED) Indicates that the STB is under Standby. OPERATING LED (GREEN) Indicates that the STB is operating. TV...

From Cable/ Antenna Source TV Rear Panel 1. Connect a parabola antenna cable to the LNB IN jack. Connect an AIR or Cable Box Antenna out terminal to the RF IN jack. 2. Connect between the RF OUT jack on the STB and the ANT INPUT (RF INPUT) jack on the TV. 3. Turn on your STB and TV.4. Tune the STB t...

TV Rear Panel VCR Rear Panel From Cable/ Antenna Source 1. Connect a parabola antenna cable to the LNB IN jack. Connect an AIR or Cable Box Antenna out terminal cable to the RF IN jack. 2. Connect between the RF OUT jack on the STB and the ANT INPUT (RF INPUT) jack on the TV. 3. Connect a set of aud...

STANDBY TV/SAT (Reserved) TV/RADIO MUTE MENU CURSOR OK P+/P- HELP EPG RCL (Recall) RS-101N NUMBER BUTTONS INFORMATION (RED) SOUNDTRACK (GREEN) SUBTITLE (YELLOW) PAUSE (BLUE) EXIT V+/V- TIME (WHITE) Remote Control Unit GB14

The details of Service Part and Event Part are automatically displayed on the I-Plate when pressing the( )button or changingservices. I-Plate is divided into Service Part and Event Part. Service Part consists of the following item : • I-Plate icon, Current Time• Service Name, Service Number, icon• S...

To change services, do in the following sequence:1. Press the Number buttons(0~9) on the remote control.2. Press the buttons or buttons. Or press the Recall( ), Service-List( ), EPG( )button.To switch between TV and Radio services, press the TV/Radio( )button.To select the previous viewed service, p...

To select the desired service in the service list, you should firstly display the service list using button. Use buttons toselect a service and press button. Also use buttons to select a service directly in the service list. The Service List consists of Service All and Service Favorite.On the Servic...

Your STB has an Electronic Program Guide(EPG) to help younavigate through all the possible viewing options. The TV Guide supplies information such as program listings andstart and end times for all available services. In addition, detailed information about the program listings andstart and end time...

You can watch a program being shown and reserve it in the TV Guide mode. To enter the TV Guide modePress the EPG( )button on the remote control unit or select the TV Guide on the Main Menu. To select the TV/Radio GuidePress the button on the remote control unit and TV Guide will be switched to the R...

Time Setting You can set the Current Time and Wakeup Time in this mode. Furthermore, the Service Number in the Wakeup Time mode andSleep Time (standby mode) can be set. When a VCR is connected,recording can be automatically done according to Wakeup/Sleep Time Setting. To set the Current Time, enter ...

Main Menu Guide Select the OSD transparency and Information Box Display Time. Select the OSD transparent type. It affects Information Box, ServiceList, Time and Quick mode of TV Guide. Use the buttons totoggle transparent and opaque. Set the display duration of Information Box displayed on the scree...

• Rename 1. Use the buttons to select a service you want to rename. 2. Press the White( )button and the keyboard image will appear on the center of screen. 3. Use the buttons to select a new name and then press the button. 4. Press the Yellow( )button to finish renaming. Delete, Move, Lock, Skip or ...

GB29 Same functions as “Organize TV Services” You can edit services using the network unit.The network names are displayed on the left side of screen,and the TV/Radio Services included in the highlighted network aredisplayed on the right side of screen.Only the Delete, Move, Rename Function can be u...

Selects the satellite name that corresponds to the value of the Antenna Alternative.Press the buttons and the satellite names you can memorizewill be listed on the screen.Use the buttons to select a satellite name and then press the button.This name will help you Select Antenna Alternative In Manual...

GB31 Find the services manually in the transponder you select.This search mode included normal advanced and SMATV search. Use the buttons to select an antenna number for the requiredsatellite. The satellite name will help you select antennas. If you want to search in SMATV mode, then select the Ante...

Press the button to find services using PIDs and more items forselecting PIDs will be displayed. Press the button and Video, Audio and PCR PID items will be added. Enter the PID values forVideo, Audio and PCR. When the Number buttons(0~9) arepressed, a hexadecimal table will be displayed. Then you c...

Detail Mode The pre-fixed symbol rate list is changed according to AntennaAlternative and Satellite Name. If you want to add or change it,press the Red( )button. ** The value of Pre-fixed symbol rates can not be editable. (22000, 27500) The picture of the Symbol Rate Add/Change mode is as follows:1....

Main Menu Guide 3-4. Status Displays the information of H/W Version, S/W Version, Loader Version and so on. Shows the Signal Level(AGC level) and Signal Quality(BER) of the current service and is help to the initial antenna setting. You can download and upgrade the software of this STB via a satelli...

GB37 Motorised System DiSEqC 1.2 User Instructions If you have a DiSEqC 1.2 motorised system, then you can use the DiSEqC 1.2 functions available.The following instruction describes how to use the DiSEqC 1.2 functions to store the positions of thesatellites and to search for the services(STAB Rotor ...

Motorised System GB38 3. Initial Satellite Position Search This is required when you first set your receiver up to use DiSEqC 1.2 and sets the positions of allpre-programmed satellites. 1. Make sure your motor is installed correctly with the calibrations adjusted for the region you are situated. (Pl...

GB39 6. To set the East Limit: a) Select Movement and use the buttons to move your motor East or West until the motor is at the position you wish to use as your East Limit. Use the buttons to stop the motor at the correct position. b) Highlight the Store East Limit option and press the OK button to ...

Motorised System GB40 Once you have stored the positions of the satellites you want(see left below) you can now search forthe services transmitted from them. Before you can do this, you must move the motor to the position of the satellite you wish to search. To do this, you must access the Satellite...

Does not display any LED on the front panel or STB has no power. • Check the main power cable and check that it is plugged into a suitable power outlet.• Check whether STB is in Standby mode. No Picture • Ensure that the STB is switched on (see above).• Check the video output port (RCA/RF) is firmly...

Tuner & Channel MPEG Transport Stream A/V Decoding Memory Input ConnectorFrequency RangeInput ImpedanceSignal LevelIFIF Band widthLNB Power &Polarisation 22 KHz ToneDiSEqC ControlDemodulationInput Symbol RateFEC Decorder Transport Stream Profile LevelInput RateAspect RatioVideo ResolutionAud...