Page 2 - Contents
Contents Safety ................................................................... GB1 Copyright ............................................................. GB2 Glossary .............................................................. GB3 Reference .....................................................
Page 3 - Safety
Safety GB1 This STB has been manufactured to satisfy the international safety standards.Please read the following safety precautions carefully. MAINS SUPPLY : 90 - 250V AC 50/60Hz OVERLOADING : Do not overload a wall outlet, extension cord or adapter as this may result in fire electric shock. LIQUID...
Page 4 - Copyright
Copyright • VIACCESS TM is a trademark of France Telecom. • CryptoWorks(TM) is a trademark of Philips Electronics N.V. • Irdeto is a trademark of Mindport BV. • Nagravision is a registered trademark of Kudelski S.A. • Conax is a trademark of Telenor Conax AS. HUMAX cannot be held responsible for any...
Page 5 - Antenna; A system of error control for data transmission.; Frequency; Phase-shift keying in which four different phase angles are used.; Service; A channel to which a decoder or TV is tuned.; Transponder; Glossary
Glossary GB3 • Antenna A device that collects and radiates electromagnetic waves. Includes a satellite dish and abroadband antenna. • Forward Error Correction(FEC) A system of error control for data transmission. • Frequency The number of cycles or events per one second, which is expressed in the un...
Page 6 - Connect a Satellite antenna; Reference
All our receivers are designed to be DiSEqC 1.0 compatible. This allows multiple antennasto be connected to the STB simultaneously.If you have two or more fixed antennas or LNBs, you can use a DiSEqC 1.0 switch. 1. Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input connector of...
Page 7 - decide when and where to release through satellite system).
Reference GB5 HUMAX digital set-top box is a highly sophisticated product - incorporating one of the best software applications.Whenever a problem is found with this software or, in fact, extra functions or enhanced applications are added, the software in the equipment has to be upgraded.In order to...
Page 8 - Front Panel; STB Connections
F1-FOX Free-To-Air VA-FOX 1 Smart card CR-FOX 1 Smart card Front Panel GB6 STB Connections English (HSMM30GB) 10/30/02 10:06 AM Page 9
Page 9 - SMART CARD SLOT
STB Connections GB7 • , Press to change services down and up. • SMART CARD SLOT Insert a smart card in the slot with the gold chip facing up. Otherwise, it will not operate properly. • ERROR LED(AMBER) Indicates that the STB has an error. • STANDBY LED(RED) Indicates that the STB is under standby. •...
Page 10 - Rear Panel; LNB IN; Use to connect an antenna.; LNB OUT; Use it when connecting to another STB.; TV SCART; Audio signal from your STB to Hi-Fi system.
F1-FOX VA-FOX, CR-FOX, NA-FOX Rear Panel • LNB IN Use to connect an antenna. • LNB OUT Use it when connecting to another STB. • RS-232C Use it when connecting to your PC. • TV SCART For the audio/video input of the TV. • VCR SCART For the VCR. • AUDIO OUTPUT Audio signal from your STB to Hi-Fi syste...
Page 11 - and the other end to a SCART socket on your TV.; TV only; • The specifications of Rear panel are based on VA-FOX.
STB Connections 1. Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and the other end to a SCART socket on your TV. 2. Connect the coaxial cable from the LNB to the LNB IN socket on the STB. 1. Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB a...
Page 13 - Remote Control Unit
Remote Control Unit GB11 English (HSMM30GB) 10/30/02 10:06 AM Page 14
Page 15 - Guide of Functions; HELP
Guide of Functions The details of service part and event part are automatically displayed on the I-Plate when pressing the i button( ) or changing services.I-Plate is divided into service part and event part. SERVICE PART consists of the following items: • I-Plate icon, Current time • Service name, ...
Page 16 - Use the; Changing Services
To change services, do in the following sequence: 1. Press the NUMERIC buttons(0~9) on the remote control unit. 2. Press the buttons or buttons. Or press the RECALL ( ), Service-list( OK ), EPG ( )mode button. To switch between TV and Radio services, press the TV/Radio ( )button. To select the previ...
Page 17 - Teletext; Service Configuration
Guide of Functions Use your TV remote control unit to control the Teletext service.The teletext button doesn’t exist on the STB remote control unit.When the service supports Teletext, the Teletext icon( ) is displayed on the I-plate. The Service List consists of Service All and Service Favourite.On ...
Page 18 - Guide of Main Menu; This menu provides Calendar and Biorhythm.
Guide of Main Menu Your STB has an Electronic Programme Guide(EPG) to help you navigate through all the possible viewing options.The TV Guide supplies information such as programme listings and start and end times for all available services.In addition, detailed information about the programme listi...
Page 19 - RED
Guide of Main Menu You can watch a programme being shown and reserve it in the TV Guide mode. To enter the TV Guide mode Press the EPG ( )button on the remote control unit or select the TV Guide on the Main Menu. To select the TV/Radio Guide Press the TV/Radio( )button on the remote control unit and...
Page 21 - OK
Guide of Main Menu You can set a parental guidance rating to each programmein this mode. 1. When the OK button is pressed after selecting the highlighted parental control on the initial menu screen, a display window for entering the PIN code will appear on the centre of screen. ** The default PIN co...
Page 23 - ( )button on the remote control unit to toggle; Time Setting
Guide of Main Menu You can set the Current Time and Wakeup Time in this mode.Furthermore, the Service Number in the Wakeup Time mode andSleep Time(standby mode) can be set.When a VCR is connected, recording can be automatically doneaccording to Wakeup/Sleep Time Setting. To set the Current Time, ent...
Page 24 - Set the video mode for the TV SCART output.; Audio Output
Set the video mode for the TV SCART output. Set the audio mode which is output from the TV SCART and RCA/Cinch Jack.(Stereo/Mono) Select the aspect ratio of TV which is connected to STB(4:3 or 16:9). Select the format which the video is to be displayed on screen.When your TV set is 4:3 and video sou...
Page 25 - Select the OSD Transparency and Information Box Display Time.; Other Setting
Guide of Main Menu Select the OSD Transparency and Information Box Display Time. Select the OSD Transparent type. It affects Information box,Soundtrack, Subtitle, Service list, Time and Quick mode of TV Guide. Use the buttons to toggle transparent and opaque. Set the display duration of information ...
Page 26 - Organise TV Services
3-2. Service Organising This menu gives users access to options that allow them to organise their Networks, TV Services and Radio Services. ** The default PIN code is . This mode allows users to Delete, Move, Lock, Skip and RenameTV Services. • Delete 1. Press the RED ( )button to delete unwanted se...
Page 27 - Then, the keyboard image will be displayed on the screen.
Guide of Main Menu • Rename 1. Press the WHITE ( )button to change the service name. Then, the keyboard image will be displayed on the screen. 2. Key in the new service name. You can use the four direction keys to move or select theservices. : to move the previous service: to move the next service: ...
Page 32 - Manual Search
GB30 Set the search parameters(Frequency, Symbol Rate, etc.) to manually find the services that you have selected in the transponder.The bar on bottom of the submenu shows the signal level and signal quality(BER) of the entered parameters. Select the target antenna for Manual Search.The Satellite Na...
Page 33 - NUMERIC
Guide of Main Menu • You can select Yes or No. When you select “Yes”, you can find more transponders using the home network. • As it refers to NIT during searching, if there is the frequency information of other transponder, it searches the other transponders besides the transponder that the user in...
Page 34 - Automatic Search; parameters that is preset.
GB32 Automatic Search When you enter the Satellite Name that is set in Antenna Settingmenu, search all of the selected satellite without inputting the extrafrequency. Select the target antenna for Automatic Service Search.The attribute of this antenna alternative number is already set inAntenna Sett...
Page 38 - For CryptoWorks Embedded
GB36 This menu allows the user to view and change information on the Smart Cards such as available entitlements, Maturity Rating and PIN Code. Besides, you can view the mails from programmeproviders. Card label will be displayed as issuer’s name on the TV screen.Programmes or Bouquets which are encr...
Page 39 - For Nagravision Embedded
Guide of Main Menu In this menu you can make PIN Code enabled, disabled or changed. • Enable PIN Code You can enable the PIN Code. • Disable PIN Code You can disable the PIN Code. • Modify PIN Code You can change the PIN Code by using the NUMERIC buttons(0~9) on the RCU. You will need to enter the o...
Page 40 - When you press the; button at the screen, the data of system; EXIT; button, the function will be cancelled
GB38 3-6. Default setting When you press the OK button at the screen, the data of system setting will be changed into the default values and some Free-To-Airservices of ASTRA1 will be stored in replacement of all servicesfound. If you press the EXIT button, the function will be cancelled and return ...
Page 41 - DiSEqC 1.2 User Instructions
Guide of Main Menu GB39 DiSEqC 1.2 User Instructions If you have a DiSEqC 1.2 motorised system, then you can use the DiSEqC 1.2 functions available.The following instruction describes how to use the DiSEqC 1.2 functions to store the positions of thesatellites and to search for the services(STAB Roto...
Page 43 - Motorised System; Manual Satellite Search
Motorised System GB41 6. To set the East Limit: a) Select Movement and use the buttons to move your motor East or West until the motor is at the position you wish to use as your East Limit. Use the buttons to stop the motor at the correct position. b) Highlight the Store East Limit option and press ...
Page 44 - Searching for services on your selected Satellite
GB42 Once you have stored the positions of the satellites you want(see left below) you can now search forthe services transmitted from them. Before you can do this, you must move the motor to the position of the satellite you wish to search. To do this, you must access the Satellite Settings menu.Do...
Page 46 - Troubleshooting Guide
Troubleshooting Guide GB44 English (HSMM30GB) 10/30/02 10:06 AM Page 47
Page 47 - Menu Map; MAIN MENU
Menu Map MAIN MENU NTSC Mode Menu Mode Delete Satellite GB45 English (HSMM30GB) 10/30/02 10:06 AM Page 48
Page 49 - Specification; MPEG Transport Stream A/V Decoding; Transport Stream
Specification Tuner & Channel MPEG Transport Stream A/V Decoding Memory Input ConnectorFrequency RangeInput ImpedanceSignal LevelIFIF Band widthLNB Power &Polarisation 22 KHz ToneDiSEqC ControlDemodulationInput Symbol RateFEC Decode Transport Stream Profile LevelInput RateAspect RatioVideo R...
Page 50 - Physical Specification; You can use a special antenna switch with DiSEqC commands.
A/V & Data In/Out TV SCART VCR SCART AUDIO R/L RS-232C Video Output(CVBS, RGB, S-Video)Audio Output(Resolution : 20 bits DAC, Max. 2 Vrms)Video Output(CVBS)Video Input(CVBS, RGB, S-Video)Audio Output(Resolution : 20 bits DAC, Max. 2 Vrms(fixed))RCA/Cinch Volume and Mute Control(Resolution : 20 b...
