Humax F2-FOXT - Manuals - manualsarea.com

Page 2 - Notice

** Copyright (Copyright © 2001 HUMAX Corporation) Not to be copied, used or translated in part or whole without HUMAX's prior consent in writing exceptapproval of ownership of copyright and copyright law. ** Warranty The information in this document is subject to change without notice. HUMAX does no...

Page 4 - Safety Instructions and Precautions; CONNECTION TO THE AERIAL; Safety and Warning

** This digital terrestrial receiver has been manufactured to satisfy international safety standards.Please read the following safety precautions carefully. ** Safety Instructions and Precautions ** 1. MAINS SUPPLY ** 90 - 250V AC 50/60HzOperate your product only from the type of power source indica...

Page 5 - Warning

** 10.LOCATION ** Place the receiver indoors to avoid exposing it to lightening, rain or sun.Do not place it near a radiator or heat register.Make sure it has more than 10 cm clearance from any appliances susceptible toelectromagnetic influences, such as TV and VCR.Do not block these openings with a...

Page 6 - Contents

** 1. Before Using the Receiver 1.1 Package Contents 1.2 Front Panel 1.3 Rear Panel 1.4 Remote Control GB7 ** GB7 GB8 GB9 GB10 2. Setup 2.1 Connecting Aerial 2.2 Powering On GB12 ** GB12 GB14 3. Installation Wizard GB15 4. Basic Operation 4.1 Switching Channel 4.2 Volume Control 4.3 Text and interac...

Page 7 - Setting Preferences; System Information; Manipulating your TV using Remote Control; Service and Support

** 7. Setting Preferences 7.1 Parental Control 7.2 Language Setting 7.3 Time Setting 7.4 Schedule 7.5 A/V Control 7.6 UHF Tuning 7.7 Miscellaneous Settings GB35 ** GB35 GB37 GB38 GB40 GB40 GB42 GB43 8. Installation 8.1 Automatic Search 8.2 Manual Search 8.3 Default Setting GB44 ** GB44 GB45 GB47 9. ...

Page 8 - Before Using the Receiver

** This chapter describes detail instructions on the product and its accessories. 1.1 Package Contents Please check all package contents before using your receiver. ** ** Remote Control (1) User's Manual (1) Batteries (2) Scart Cable (1) ** Note: Since faults may occur if the remote control is being...

Page 9 - Before Using the Receiver

** 1.2 Front Panel ** 1. STANDBY Button ** Switches between Operation and Standby modes. 2. TV/RADIO Button ** Switches between TV and Radio. 3. CH - / CH + ** Moves the TV/Radio channel up/down. 4. STANDBY LED ** Red light is displayed when the product is in the Standby mode.Green light is displaye...

Page 13 - Connecting Aerial; Connecting TV and VCR

** This chapter describes how to set up the receiver. Select the most appropriate procedure dependingon your case. Note: If you encounter any problem when setting up the receiver, please contact your localproduct distributor. Where possible, use an outdoor roof aerial intended for receiving UHF chan...

Page 15 - Power on by pressing the STANDBY

** 2.2 Powering On 1. Connect the power cord of the receiver to a wall outlet. 2. Power on by pressing the STANDBY button at Remote Controller.The Standby LED indicator is turned on Green. ** 2. Setup GB 14 ** ** ** ** ** **** ** ** ** ** **** **

Page 16 - Press the EXIT; Installation Wizard

** When powering on your receiver for the first time after purchasing, the Installation Wizard isautomatically started. It immediately performs Channel Search.(You can run the Installation Wizardin Default Setting.) Please wait for finishing the Channel Search. If you want to stopthe Channel Search,...

Page 17 - Switching Channel; Text and interactive services

** This chapter describes functions such as switching channel, volume control, and basic features forwatching programmes. 4.1 Switching Channel You can switch the current channel using one of the following methods. 1. Press the CH-/CH+ button. 2. Enter your desired channel numeric using the NUMERICA...

Page 19 - General Information

** 4.6 Programme Information (I- plate) Programme information is always displayed for a specific period of time whenever you switchchannels. You can view the programme information by pressing the i button while watching a programme. Press the EXIT button to hide the I-plate. 1. General Information G...

Page 20 - Detail Programme Information; Press the i

** 4. Current time 5. Detail programme information: displayed if detailed programme information is provided. 6. Channel looping mode and Channel List Name : if you select Within the current channel list by selecting MENU - Edit channels - Channel Change Mode , the Icon of Channel loopingmode is disp...

Page 21 - Add a channel to favourite group

** 4.7 Option List You can view and confirm detailed information about the current channel and change the informationin necessary. Note: Press the OPT+ button when the channel list is displayed to view Option List. Then the following functions in the option list are performed to the current channel ...

Page 23 - Displaying and Switching Channel List

** 3 types of channel lists are provided for easy and quick channel searching. TV The list of all TV channels with 2 sub-groups: one is sorted by channel number, theother is sorted by channel name. Radio The list of all Radio channels with 2 sub-groups: one is sorted by channel number,the other is s...

Page 24 - Changing Channel List Group

** 5.2 Changing Channel List Group You can select channel list by group. 1. Press the button while the channel list is displayed to view the group list. 2. Select your desired channel group using the button to display its sub-groups. 3. Press the OK or button, select your desired sub-group using the...

Page 25 - EXIT; Select a Channel Group

** 5.3 Edit Channels You can edit all channels or each channel by channel list group. 1. Press the MENU button. 2. Select Edit Channels using the button, and press the OK or button. 3. Select Edit Channel lists using the button, and press the OK or button. 4. You will be prompted to enter your passw...

Page 26 - OK

** 2. Delete Channels You can delete one or more channels. 1. Move the cursor to the channel list using the button. 2. Select your desired channel, and then press the OK button to delete the channel(s). You can select multiplechannels. 3. Select Delete in the right using the button, and press the OK...

Page 27 - Edit Favourite Channels

** 5.4 Edit Favourite Channels You can edit Favourite channel or Favourite channel list. 1. Press the MENU button. 2. Select Edit Channels using the button, and press the OK button. 3. Select Edit Favourite Channels using the button, and press the OK or button. Note: • Press the BACK or button to sa...

Page 29 - Additional Features; Change between TV and Radio channel list

** 4. When finishing entering the Favourite channel list name, select OK, and press the OK button. 4. Additional Features Additional Features provides many useful functions which are necessary to add Favourite Channel. ** Change between TV and Radio channel list You can add not only TV channel(s) bu...

Page 30 - Channel Change Mode

** 5.5 Channel Change Mode You can change the channel either in the group or in the entire groups while watching a programme. 1. Press the MENU button. 2. Select Channel Change Mode using the button, and press the OK or button. 3. Select All Channels or within the current channel list using the butt...

Page 31 - Viewing Programme Guide Information; Viewing Guide Information by Groups

** The Programme Guide displays programme information about each channel, based on the date andtime.You can also schedule your watching using the information given. ** 6.1 Viewing Programme Guide Information You can view programme information for all channels. 1. Press the GUIDE button. 2. Move to p...

Page 32 - Viewing Programme Information Using Time Bar

** 2. Viewing Programme Information Using Time Bar You can quickly search for your desired time zone using the Time bar. 1. Press the GUIDE button. 2. Press the Green button to display Time Bar. 3. Select the Time Bar button using the button, and press the OK button to move as your desired amount of...

Page 33 - Finding a Programme

** 6.2 Finding a Programme You can find your desired programme by programme name or genre easily. 1. Press the GUIDE button. 2. Press the Blue button to display Find screen. 3. Enter the programme name directly using the keyboard displayed on the screen. 4. When completing entering programme name, s...

Page 34 - Viewing Reserved Programme; Editing a Reserved Programme

** 6.3 Viewing Reserved Programme You can add or edit reserved programmes by viewing the reserved programme list. 1. Press the GUIDE button. 2. Press the Yellow button to display the Schedule screen. 3. Select the scheduled programme and press the OK button to edit the reservation information. 4. Se...

Page 35 - Adding a Reservation

** 2. Adding a Reservation 1. Enter your desired channel number using the NUMERICAL (0-9) button. The channel name isautomatically displayed by channel number. 2. Enter your desired Start Time using the button and the NUMERICAL (0-9) button. 3. Enter your desired End Time using the button and the NU...

Page 36 - Setting Censorship

** You can set censorship, watching time, and all other items suitable for your environment. Note: • Press the BACK or button to save the changes and return to the previous menu. Press the MENU or EXIT button to exit the Menu screen. • You can easily select any item from the menu using the NUMERICAL...

Page 37 - Setting Allow Watch Time; Disable You can watch whenever you want regardless

** View All All programmes can be watched because there is no age limitation. 7 Programmes are blocked for children under the age of 7. 12 Programmes are blocked for children under the age of 12. 15 Programmes are blocked for children under the age of 15. 18 Programmes are blocked for children under...

Page 40 - Setting Current Time; Enable

** 1.Setting Current Time You can set the GMT Offset for current time. 1. Select GMT Offset using the button. 2. Press the or OK button to display GMT list. GMT is changed by from 30 minutes to 1 hour. 3. Select your GMT offset using the buttons, and press the OK button. Note: • The current time is ...

Page 44 - Disable

** 7.7 Miscellaneous Settings 1. Press the MENU button. 2. Select Preferences using the button, and press the OK or button. 3. Select Miscellaneous Settings using the button, and press the OK or button. 1. i-Plate Display Time You can set the duration during which the Information box is to be displa...

Page 45 - Search

** This chapter describes how to search for channels and a series of procedures. 8.1 Automatic Search If your receiver is connected to the aerial and television, you can automatically search channelswithout entering any other information. 1. Select MENU button. 2. Select Installation using the butto...

Page 49 - If new software is found when powering on

** In order to maintain proper performance of this product, it is essential to have the most up to datesoftware. The latest news and release of software versions may be found at Humax website -http://www.humaxdigital.com. It is recommended that you periodically check for the availability of software...

Page 50 - If updating software from Menu; If using Automatic Update

** ** 2. If updating software from Menu 1. Press the MENU button. 2. Select Installation using the button, and press the OK or button. 3. Enter Password using the NUMERICAL (0-9) buttons. 4. Select Software Update using the button, and press the OK or button. ** 3. If new version of software is dete...

Page 55 - TV code setting; Brand

** You can manipulate TV using the remote control provided by Humax. Note: This function may not be supported depending on TV model. TV code setting Note: While you are setting TV code, please keep pressing TV button. 1. Point remote control towards the remote control receiving parts of TV. 2. Press...

Page 68 - Memory; Physical Specification

** Memory Flash Memory 4 Mbytes Graphics (MPEG) & System Memory 16 Mbytes EEPROM 8 Kbytes RF-Modulator RF/Loop-through Output Connector 75 , IEC 169-2 Frequency 470 ~ 862 MHz Output Channel CH 21 ~ 69 TV standard PAL I/G/B Preset Channel CH 36 A/V & Data In/Out Video 1 Output RCA Audio R/L 2...

Page 70 - Homepage

** You can get information such as a troubleshooting guide, software upgrades and product supportguide from the following web sites and call center (Hotline). Please try to contact to your local dealers first when you have any problem. Web site and e-mail Homepage http://www.humaxdigital.com English...

Page 71 - Call Center

** Call Center Humax Middle East Call Center (Dubai, UAE) Tel: +971 (0)4 359 2323 (Open: 9:00 - 20:00 / close on Friday) E-mail: [email protected] Open: Local Time in Dubai (GMT+4) 9:00 - 20:00 (Saturday - Thursday, close on Friday) Support Language: English/Arabic ** Humax Hotline (Germ...